Question about 2004 Audi A4
I need a diagram of how the serpentine belt runs on an audi a3 2002
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: audi radio code
I accidentally tossed out my 1993 Audi 100CS radio code
when getting rid of junk in the glovebox.
After changing my headgasket on the motor we reconnected the battery supply & found the radio on SAFE mode.
AUZ1Z7N2020175 is the Radio #
Anyones help to me at Dhuber@c-ram.net is appreciated.
Thank you in advance!
Posted on Jul 16, 2008
SOURCE: audi a3 1.8t dump valve fitting
A dump valve replaces the recirc valve. Did you see the reply to your prior post on this topic that I put up the other day? You can do it but it'll cost you your catalytic converter and O2 sensors - that has been proven out many times in the past. If you don't care about that and don't mind spending $1200-1500 every year or 18 months to replace those parts, then go to www.audiworld.com or www.audidiy.com and look in the tech areas - there are step by step procedures there that walk you through recirc valve replacment. They'll show you how to fit an aftermarket recirc valve, but you can follow that procedure to do a BOV as well.
Seriously though, as I said before, some cars are fine with BOVs but Audis are not. You're going to cost yourself a LOT of money just for the sneeze sound and slightly slower turbo spool. Your car and money though so it's your decision.
Posted on Oct 19, 2008
Hello m_hueffer, my name is JShreader. Thank you for choosing fixya.com.
Here is the diagram you requested...
I hope this helps you. If you have any more questions or need any more diagrams, please don't hesitate to ask...Thanks again, JShreader!
Posted on Apr 01, 2009
Ribbed Belt: Service and Repair
Ribbed Belt, Removing and Installing
Ribbed belt, removing and installing
CAUTION: Mark the direction of belt travel before removing, using a crayon or marker. Reinstalling a used belt in the opposite direction
could damage the belt
Note: There are two different types of ribbed belt, identified as versions A and B.
Ribbed belt versions, identifying, refer to Application and ID
Old version A
- Remove ribbed belt guard.
- Loosen ribbed belt tensioner using 15 mm wrench and drift 3204.
- Remove ribbed belt.
New version B
- Using 10 mm hex socket wrench, turn downward in direction of arrow to loosen ribbed belt.
Install in reverse order of removal, noting the following:
- Place ribbed belt over drive pulleys and idler roller first, and onto tensioning roller last.
- Remove drift 3204.
- Install ribbed belt guard.
Posted on Oct 02, 2009
SOURCE: need a diagram of serpentine
The serpentine belt routing diagram for 2000 Audi A6 2.8 liters V6 engine:
CS = Crankshaft
F = Fan pulley
Gen = Alternator
T = Tensioner
AC = Air Conditioning
PAS = Power Assisted Steering
Posted on Oct 01, 2010
Tips for a great answer:
Apr 15, 2015 | Audi Cars & Trucks
Dec 02, 2010 | 1992 Audi 100
Nov 03, 2010 | Audi A6 Cars & Trucks
Oct 09, 2010 | Audi A8 Cars & Trucks
Sep 30, 2010 | Audi A6 Cars & Trucks
Aug 19, 2010 | Audi A4 Cars & Trucks
15 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: