Question about 1983 Ford Bronco

Open Question

Safety neutral switch location

Where is it located

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 373 Answers

SOURCE: Locating fuel shut-off safety switch

The Inertia Fuel shut-off switch on a Festiva.
Is located : In LEFT REAR of Passangers. compartment.
Almost in the rear corner.

I hope you find.
Thank you for use fixya.

Posted on Jul 23, 2008

canbruce75
  • 1776 Answers

SOURCE: removing neutral safety switch

Check out the autozone website at autozone.com and register your vehicle. It is free and will give you access to an online repair manual for the vehicle. The steps for removing the neutral safety switch can be found there. Hope this helped. Best wishes.

Posted on Aug 03, 2009

ZJLimited
  • 17970 Answers

SOURCE: Looking for the neutral safety switch

Neutral Safety/Back-up Light Switch

This is a combination switch which controls both Neutral Safety and Back-up lamp circuits.

C6 Transmission


8290dff.jpg

C6 neutral start switch

  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle on jackstands.
  3. Remove the downshift linkage rod return spring at the low-reverse servo cover.
  4. Coat the outer lever attaching nut with penetrating oil. Remove the nut and lever.
  5. Remove the 2 switch attaching bolts, disconnect the wiring at the connectors and remove the switch.
  6. Installation is the reverse of removal. Adjust the switch and tighten the bolts to 55-75 inch lbs. (6.2-8.5 Nm).
  7. Remove the jackstands and lower the vehicle.
  8. Connect the negative battery cable.
AOD Transmission

e7f4231.jpg

Removing the AOD neutral start switch
  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle on jackstands.
  3. Disconnect the wiring from the switch.
  4. Using a deep socket, unscrew the switch.
  5. Installation is the reverse of removal. Tighten the switch to 10 ft. lbs. (14 Nm).
  6. Remove the jackstands and lower the vehicle.
  7. Connect the negative battery cable.
4R70W Transmission

2f68dfc.jpg


Removing the Manual Lever Position (MLP) sensor

As of 1994, the neutral safety switch is referred to as a Manual Lever Position Sensor (MLP).
  1. Disconnect the negative battery cable.
  2. Raise and safely support the vehicle on jackstands.
  3. Disengage the harness connector from the MLP sensor.
  4. Remove the 2 sensor attaching bolts and remove the sensor.
To install:
  1. Install the MLP sensor and install retaining bolts. Do not tighten, the sensor requires adjustment.
  2. Adjust the MLP sensor then tighten attaching screws to 80-100 inch lbs. (9-11 Nm).
  3. Remove the jackstands and lower the vehicle.
  4. Connect the negative battery cable.


ADJUSTMENT

C6 Transmission
  1. Hold the steering column transmission selector lever against the Neutral stop.
  2. Move the sliding block assembly on the neutral switch to the Neutral position and insert a 0.091 in. (2.3mm) gauge pin in the alignment hole on the terminal side of the switch.
  3. Move the switch assembly housing so that the sliding block contacts the actuating pin lever. Secure the switch to the outer tube of the steering column and remove the gauge pin.
  4. Check the operation of the switch. The engine should only start in Neutral and Park .

4R70W Transmission


4cc4151.jpg


Adjusting the MLP sensor

Park is the last detent when the manual control lever is full forward. Return 2 detents toward the output shaft for Neutral.
  1. Position the manual control lever in Neutral .
  2. Insert Gear Position Sensor Adjuster tool T93P-700 10-A or equivalent, into the slots.
  3. Align all 3 slots on the MLP sensor with 3 tabs on the tool.
  4. Tighten the attaching screws to 80-100 inch lbs. (9-11 Nm).

I hope help you. Good luck (rated this help).

Posted on Sep 18, 2009

  • 1146 Answers

SOURCE: clutch safety switch

Hi:
The clutch safety switch is mounted up above the clutch pedal arm, near the pivot point.

Posted on Nov 18, 2009

Testimonial: "Thanks Bud, I wasn't sure and I had heard it was mounted inside the trany. Have a Great Day !"

drsinister69
  • 2317 Answers

SOURCE: where is the neutral safety switch?

Should be mounted on the drivers side of the transmission, usally behind the shifter lever coming out of the transmission.

Posted on Mar 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of neutral safety switch 96 mazda protege


Hi Donald,I sent the link to your neutral safety switch,did you get it.

Jun 17, 2015 | 1996 Mazda Protege

1 Answer

Locate the safety neutral switch on a 1997 ford taurus


the neutral safety switch is located on the sterring columm
de2547ba-201d-4856-93b4-1a62cd9289a8.jpg

Feb 10, 2014 | Ford Windstar Cars & Trucks

1 Answer

Neutral safety switch location


If you have a 5-speed manual transmission, you're probably looking for the clutch safety switch, which is located on the clutch pedal under the dash near the firewall, rather than the neutral safety switch, which is on the left side of automatic transmissions. Out of curiosity, why do you believe that it needs to be serviced?

Oct 08, 2013 | Dodge Cars & Trucks

1 Answer

Neutral safety switch


If the Stratus is a manual transmission, you're looking for the clutch safety switch located on the clutch pedal near the firewall; if it's an automatic transmission, the neutral safety switch is located on the transmission...probably an oblong, 3-wire connector.

Sep 28, 2013 | Dodge Cars & Trucks

1 Answer

Need location of neutral safty switch on my 1990 cadilac broughm 350 engin e


The neutral safety switch is located on the top and toward the base of the steering column almost to the floorboard.

To remove or install the neutral safety switch be sure to place the shifter in the neutral position, then dis-connect the wire connector at the neutral safety switch, then remove the securing screws and then remove the neutral safety switch.

Install the new neutral safety switch and do not over-tighten the securing screws, then remove the alignment pin and re-connect the wire connector to the neutral safety switch. (be sure not to remove the alignment pin until the neutral safety switch has been installed)

Check to be certain that the vehicle only starts in "Park" or "Neutral". Here is an image to help assist you, and let me know if you require any further assistance.


f494426.jpg

Sep 12, 2010 | Cadillac Brougham Cars & Trucks

1 Answer

Where is the neutral safety switch on 1998


The neutral satety switch is located at the Right Side Of Gear Selector.

Apr 15, 2010 | 1998 Honda Passport

1 Answer

Replace neutral safety switch on a 1988 gmc sierra


Typically the Neutral Safety Switches are located with the gear selector, either in the column or the floor.

Hope this helps,
Tom

Aug 21, 2009 | GMC Sierra 2500 Cars & Trucks

2 Answers

Where is the neutral safety switch located on 1998 Town & Country


It is built into the valve body of the transmission. It can be replaced, but it should be done by a pro. What are the symtoms that make you ask>

Aug 16, 2009 | 1999 Lincoln Town Car

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...