Question about 2004 Chrysler Pacifica

Open Question

Chrysler Pacifica problems

Needed inspection.Check engine light was on. code 442. Bought new gas cap. Drove it for the miles, came back on. Failed inspection. Same code. Had smoke test. Bought new gas cap from dealer.Drove all miles, no light. Passed inspection.Next day, light came back on.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 49 Answers

SOURCE: error codes 442 and 456 on 2003 Chrysler Town and Country

Could be the gas cap.  Do you fill the tank with the engine running?
Otherwise, check the hoses near the Evap canister.  I have 2003 T&C and had the small leak and large leak codes.  I looked at the evap cansiter and the hose coming from the fuel tank vapor line had a huge crack in it, to the point it had fallen off the evap caniser.  I trimmed the end of the hose and reconnected and voila, no codes.
The evap canister is on the driver's side of the van, underneath, slightly behind the drivers seat.
BTW, to clear the codes without an OBDII reader, remove the negative cable for 5-10 minutes (15 to be safe).  The computer resets and clears the codes, except for one that it sets saying loss of power to the memory.

Posted on Jan 24, 2009

Ad
  • 1 Answer

SOURCE: Check engine light comes on, car sputters, loses power

you need to change you crank shaft positioning censor

Posted on Sep 06, 2009

  • 19 Answers

SOURCE: I have a 2006 Chrysler Pacifica and the check

these codes are evap codes you have a breather line problem in your fuel system

Posted on Sep 19, 2009

FixinFax
  • 3085 Answers

SOURCE: 07 chrysler sebring check engine light and gascap

It might take 2 or 3 gas fill-ups before the light goes off. Don't worry.

Posted on Feb 27, 2010

joseph_lee_m
  • 2 Answers

SOURCE: Chrysler Pacifica will not start.

I had the same problem, could not figure it out. Looked all over the inter net found a post that said something about the ground wire that had a bad connection. So i followed the found wire and this is what i found. attached photos, plus whati did to fix it.
9_8_2012_8_50_27_pm.jpg9_8_2012_8_50_37_pm.jpg

Posted on Sep 08, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

DTC P0441 EVAPORATIVE EMISSION CONTROL SYSTEM INCORRECT PURGE FLOW


I had the same problem with the Evap code and I found out today that it was only the gas cap. I was getting both reading from a gas cap. I bought 2 gas caps from O'Riely and Autozone and neither one solved the problem because the caps were cheap. So, my mechanic got me one from Napa or the dealership, runs around $13-$23 and it solved the problem. The check engine light is off and to make sure, the mechanic drove my car for a while and I drove my car about 70 miles and the light did not come back on. Please do not waste your money on O'Riely and Autozone gas caps. Also be sure to replace the gas cap before doing any other major stuff. My car was a maze up until today.

on Dec 31, 2009 | Oldsmobile Cutlass Ciera Cars & Trucks

1 Answer

2004 chrysler pacifica oil light will flash and ding after coming to a stop


You have two problems going on.
The oil light is telling you the engine oil pressure is low. If the oil level is full, the sending unit for the light is faulty, or you actually do have low oil pressure.
The codes are for a leak in the EVAP system which could be the gas cap but could also be a number of other things. There are valves and hoses that could leak.
The engine oil pressure would need to be checked with a mechanical gauge, and the gas tank venting system would need to be tested for leaks.

Mar 01, 2013 | 2004 Chrysler Pacifica

4 Answers

Just bought a 2000 mitsubishi montero sport the service engine light is on but it was just inspected yesterday. no problems w oil..just changed..same as all fluids. what could be wrong? Thank you signed...


I have a 2001 Mitsubishi Montero sport, the check engine light is on, it's at 112000 miles, flawless car as far as I know, ran a diagnostics and got code P0400, what do you think it could be? I don't feel anything except it shakes a tad during idle and idles anywhere from 500k to 800k rpm. If you have any idea please let me know.

Sep 29, 2011 | 2000 Mitsubishi Montero Sport

1 Answer

I have a 2004 Yukon denali and while driving, I got check gas cap alarm. 2 miles later check engine light is on. Checked gas cap, cleaned gasket and tightened. Drove for 2 days. Reset fault and drove 160...


Hello, have you tried to unhook the negative side of the battery for about 10 minutes and then go from there . It should reset the computer completely .

Sep 14, 2011 | 2003 GMC Yukon Denali

1 Answer

Engine light on cleared and came back on


Evap Codes.You got the codes. Leaks. Now check the entire system. May be a cracked or loose hose. If not,check valves,switches.solenoids. If nothing you can find or are familiar with on site,you will need professional help and possibly a pressure test,vacuum test, smoke test etc,to find the problem.

Mar 31, 2010 | 2002 Chrysler Town & Country

3 Answers

Just bought a 2006 chevy trailblazer. the engine light kees coming on. checked and replaced 2nd cylander coil. drove 150 miles engine light came ack on


I suppose the engine code said that cylinder was not firing or faulty? I would immediately get a compression check done on the engine. It is relatively painless. My burnt valves (compression 10psi vs 150psi) could not be diagnosed any other way. Does this help?

Jul 05, 2009 | 2004 Chevrolet TrailBlazer

2 Answers

OBD codes 442 & 455


Check all of your EVAP lines and the charcoal canister. Also check the lines and overflow line from the gas cap to the gas tank.

Jun 12, 2009 | 2002 Dodge Grand Caravan

2 Answers

Check Engine Light


If the light isn't flashing, it is safe to drive. If it is flashing, then catalytic converter damage can result. Have a parts store check the codes for you and come back and post the code.

May 01, 2009 | 2004 Chrysler Pacifica

Not finding what you are looking for?
2004 Chrysler Pacifica Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...