Question about GMC Jimmy

Open Question

2000 gmc jimmy 4.3 torque specs - Jimmy GMC Cars & Trucks

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: 2000 GMC Jimmy Transmission Whine

I recently took my vehicle to a transmission shop and they had to rebuilt the transmission right through. I was recently told that the transmission is a common problem in these vehicles. Sad that GM can not fix or recall the transmisison since there is a problem.

Posted on Jan 02, 2009

Ad
  • 158 Answers

SOURCE: 2000 sebring transmission pan torque spec

10 ft lbs no real patterm needed

Posted on Apr 03, 2009

lindsay836
  • 677 Answers

SOURCE: How do you change a 2000 gmc jimmy blower motor?

How do you know the motor is bad ? Have you run 12 volts to it directly ?
We have the parts for you, and step by step instructions :
www.aescompaniesllc.com
Please click on contact us.

Posted on Feb 12, 2010

wilsodfarm
  • 986 Answers

SOURCE: Torque Specs for Head Bolts on 1997 GMC Sierra V8 5.0 Vortec?

.0L Torque Specs Belhousing to engine bolts 28-38 ft/lbs Camshaft sprocket bolt 40-45 ft/lbs Camshaft thrust plate to engine block bolts 108-144 in/lbs Crankshaft pulley to vibration damper bolts 35-50 ft/lbs Cylinder head bolts -1979-1992 --Step 1 55-65 ft/lbs --Step 2 65-72 ft/lbs -1993-up --Step 1 25-35 ft/lbs --Step 2 45-55 ft/lbs --Step 3 75-85 ft/lbs Differential shaft lock bolt 15-30 ft/lbs Driveshaft U-joint to pinion flange bolts 70-95 ft/lbs Exhaust manifold bolts 26-32 ft/lbs Flywheel mounting bolts 75-85 ft/lbs Front engine mount nuts 72-98 ft/lbs Intake manifold to head bolts --Step 1 96 in/lbs --Step 2 16ft/lbs --Step 3 23-25 ft/lbs Intake manifold (upper intake to lower) 12-18 ft/lbs Oil filter insert to engine block adapter bolt 20-30 ft/lbs Oil pan mounting bolts -1979 --Step 1 (Large bolts) 11-13 ft/lbs --Step 1 (Short bolts) 7-9 ft/lbs --Step 2 (Large Bolts) 15-17 ft/lbs --Step 2 (Short Bolts) 10-12 ft/lbs -1980 to 1987 9-11 ft/lbs -1988 to 1993 6-9 ft/lbs -1994-up 110-144 in/lbs Oil pickup tube to main bearing cap nut 22-32 ft/lbs Oil pickup tube to oil pump bolts -1979 to 1987 10-15 ft/lbs -1988-up 12-18 ft/lbs Oil pump mounting bolts 22-32 ft/lbs Pinion bearing preload 8-14 in/lbs Pressure plate to flywheel bolts 12-24 ft/lbs Rocker arm fulcrm bolts 18-25 ft/lbs Spark plugs 7-14 ft/lbs Timing chain cover bolts 12-18 ft/lbs Vibration damper to crackshaft bolt 110-130 ft/lbs Wheel lug nuts 85-105 ft/lbs

Posted on Mar 16, 2010

  • 2926 Answers

SOURCE: head bolt torque specs on a 97 gmc jimmy 4.3

6c6b8b2.jpg
First, tighten the bolts to 25 ft. lbs. (34 Nm).
Next, tighten the bolts to 45 ft. lbs. (61 Nm).
Finally, tighten the bolts to 65 ft. lbs. (90 Nm).

Posted on Sep 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the torque specs for ball joints on 2000 gmc jimmy


Upper ball joint knuckle nut 60 ft lbs, lower ball joint knuckle nut 80 ft lbs....mounting nuts and bolts 17 ft lbs

Jul 12, 2014 | 1996 GMC Jimmy

1 Answer

Torque spec on exhaust manifold for 2000 yukon xl


EXHAUST MANIFOLD BOLT TORQUE 2000 GMC Truck Yukon XL 1500 2WD 5.3L SFI 8cyl The Exhaust Manifold Bolt Torque

Exhaust manifold bolts (first pass) 11 Lb/Ft.Exhaust manifold bolts (final pass) 18 Lb/Ft.Exhaust manifold nuts 39 Lb/Ft.Exhaust manifold stud 16 Lb/Ft.Air injection reaction (AIR) Pipe to exhaust manifoldnuts 18 Lb/Ft.(AIR) Pipe to exhaust manifold studs 4 Lb/Ft.Exhaust manifold AIR pipe studs 4 Lb/Ft.Note:To torque bolts and nuts, start in center usingcrisscross pattern working outward.

May 07, 2011 | GMC Yukon XL Cars & Trucks

1 Answer

WHAT ARE THE TORQUE SPECS FOR A CRUSH SLEEVE ON A 2000 GMC JIMMY


There is no spec for that. the sleeve must be compressed until you have the correct pinion bearing preload. The pinion must take 3-5 inch pounds of torque to spin it.

May 12, 2010 | 2000 GMC Jimmy

1 Answer

I need the torque specs and torque sequence for my 1997 GMC Jimmy


if you donot have a shop manual go to library reference section and copy info from the professional motor manual under engine specs.

Apr 25, 2010 | 1997 GMC Jimmy

1 Answer

What is the torque spec for the crank pulley bolt on a 95 gmc jimmy? never torqued down to specs, could that be the reason it falls off after a month or two of driving?


The torque is 70 lb. ft.

Before reinstalling the balancer check the key way for wear both on the balancer and the crankshaft. Also when reinstalling the balancer on the crankshaft it should be a press fit. A crankshaft balancer installer kit is needed to get the balancer bottomed out in other words.

Use some sealer on the key way to prevent an oil leak.

Nov 06, 2009 | 1995 GMC Jimmy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...