Question about Cars & Trucks

Open Question

Error codes meaning

Volvo fault code p1176 cam calibration fault what does this mean

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Molson02536
  • 3854 Answers

SOURCE: check engine light code PO442

You likely won't notice any drivability problems. P0442 indicates a fuel vapor leak in the EVAP control system. It means a very small leak has been detected. In fact, the leak can be from a hole as small as 0.04" in diameter. 
The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage.
Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine.

With a P0442, the most common repair is to Remove and reinstall the gas cap, clear the codes, and drive for a day and see if the codes come back. Otherwise, replace the gas cap, or Inspect the EVAP system for cuts/holes in tubes/hoses.

Good luck and hope this helps

Posted on May 07, 2009

Ad
REDOIL
  • 355 Answers

SOURCE: 2002 Volvo S60 with Engine fault codes

THE 445 IS THE EVAP PURGE VALVE IT MAY BE BAD BOTH 446 IS SAME VAVLE YOU NEED TO SEE IF THE HOSE ARE GOOD ON THIS VAVLE MAKE SHERE NO CRACKS IF NOT PULL HOSES AND SEE IF SOMTHING IN VAVLE ITS NEAR THE CANSTER AND THAT IS NEAR THE GAS TANK UNDER CAR PUT CHECK GAS CAP MAKE SHERE ITS TIGHT HOPE THIS HELPS

Posted on Sep 15, 2009

  • 57 Answers

SOURCE: CODE 042 ON A VOLVO S60

Brake lights and cruise control are not set properly.
Easy check - are your brake lights coming on with just the usual light touch of the pedal? If not, then the microswitch that senses that your foot is on the brake needs to be adjusted or replaced.

Posted on Sep 22, 2009

wracefans24
  • 1985 Answers

SOURCE: what do codes p0335 and p0341 mean on 1996 Cavalier?

when your engine went into that 5 second sputter,
your computer or "PCM" did not get a constant signal from the crank or cam sensors that the engine was running.
These two sensors tell the computer what RPM the engine is turning so it can adjust fuel and spark.

Posted on Nov 21, 2009

  • 632 Answers

SOURCE: P1176 2000 VW JETTA ALREADY CHANGED THE 02

17584/P1176/004470 - Bank1: O2 (Lambda) Correction Behind Catalyst: Control Limit Reached Possible Causes

  • Intake Air System leaking
  • Oxygen Sensor(s) and/or Oxygen Sensor Control faulty
Possible Solutions
  • Check Intake Air System for Leaks (False Air)
  • Check Oxygen Sensor(s) and/or Oxygen Sensor Control (all of them!)
This is the pre 02 sensor located before the catalytic converter.

Posted on Jun 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does a 28876 code on a 2004 bmw 325i mean


this code does not exist in my BMW code list ,so contact the manufacturers of you cheap hand held code reader for a explanation
P1176 O2 Sensor Slow Response Bank 1 is the nearest i can find

Nov 04, 2015 | BMW 325 Cars & Trucks

1 Answer

New t880 tractors keep showing a calibration memory fault code. need helping figuring out what that means


On a new unit, the memory spaces for past calibrations are empty. The calibration memory gets filled during early operations and then the error should go away.

Mar 02, 2015 | Cars & Trucks

1 Answer

List of fault codes


If you use Google & type : OBD & your codes you find the
reasons for them

Fault codes should be listed for your vehicle

At least Generic ones

The manufactures don't let out the enhanced codes,body codes
& such, but they can be had using professional scan tools

Park Assist Error --google it

Google & You Tube Video -use those tools,every time your on
the computer

Jul 16, 2014 | Volvo S80 Cars & Trucks

1 Answer

Bmw e90 fault codes


the error codes are BMW specific and yes an error code would show up as a cam position sensor fault.

May 11, 2014 | 2008 BMW 320D E90

1 Answer

2002 VOLVO S80 T6 CODE P0017


the word correlation means relationship between two or more items . In this case it means that when the crank shaft sensor is triggered then the camshaft sensor has to be in agreement that the position of the piston and valves is in the right position to allow spark and fuel.. there are air gaps between each sensor and the rotor that triggers them and if this is not correct or there is dirt in the air gap ( the sensors may be a bit advanced or retarded in the fitment holes) then this relationship of positions is being interfered with and so you get the fault code. If after rechecking the fitment of the sensors and using a scanner to put the engine light off ,you still have a problem ,I would suggest that you find an accredited shop the does a lot of work on your make of car to assist with the fault.

Apr 23, 2014 | 2002 Volvo S80

1 Answer

What causes a P1300 boost calibration fault code in mazda rx8 1.3


my Mazda demio 2003 doesn't start it shows error codes p1300 undefined trouble code and p3302 boost calibration fault what does it mean need answers please

Nov 01, 2012 | Volkswagen Cars & Trucks

1 Answer

When i pull the code up on my 1992 park avenue it blinks once then blinks twice. what does this code mean?


This is code 12 and it means "System Normal"
Here is the complete list of fault codes for your Buick
GM common codes for OBD1 (for vehicles made before 1995)
12 System normal
13 oxygen sensor circuit open
14 coolant sensor high resistance or shorted
15 coolant sensor circuit low or open
16 direct ignition system (DIS) fault in circuit
17 cam position sensor fault
18 crank or cam sensor error
19 crank sensor circuit fault
21 tps sensor out of range
22 tps sensor signal voltage low
23 intake air temp sensor out of range, low
24 vehicle speed (vss) sensor circuit fault
25 air temp sensor sensor out of range, high
26 quad-driver module (computer) circuit #1 fault
27 quad-driver module (computer) 2nd gear circuit
28 quad-driver module (computer) circuit #2 fault
29 quad driver module (computer) 4th gear circuit
31 cam position sensor fault
32 egr circuit fault
33 map sensor signal out of range, high
34 map sensor signal out of range, low
35 idle air control sensor circuit fault
36 ignition system circuit error
38 brake input circuit fault
39 clutch input circuit fault
41 cam sensor circuit fault, igntion control circuit fault
42 electronic spark timing (EST) circuit grounded
43 knock sensor
or electronic spark control circuit fault
44 oxygen sensor lean exhaust
45 oxygen sensor rich exhaust
46 pass-key II circuit or ps.pressure switch circuit fault
47 pcm-bcm data circuit
48 misfire diagnosis
51 calibration error, mem-cal, ecm or eeprom failure
52 engine oil temperature circuit, low temperature indicated
53 battery voltage error or egr or pass-key II circuit
54 egr system failure or fuel pump circuit low voltage
55 a/d converter error or pcm not grounded or lean fuel or frounded reference voltage
56 quad-driver module #2 circuit
57 boost control problem
58 vehicle anti-theft system fuel enable circuit
61 a/c system performance or degraded oxygen sensor signal
62 engine oil temperature high temperature indicated
63 oxygen sensor right side circuit open or map sensor out of range
64 oxygen sensor right side lean exhaust indicated
65 oxygen sensor right side rich exhaust indicated
66 a/c pressure sensor circuit low pressure
67 a/c pressure sensor circuit or a/c clutch circuit failure
68 a/c compressor relay circuit failure
69 a/c clutch circuit head pressure high
70 a/c refrigerant pressure circuit high
71 a/c evaporator temperature sensor circuit low
72 gear selector switch circuit
73 a/c evaporator temperature circuit high
75 digital egr #1 solenoid error
76 digital egr #2 solenoid error
77 digital egr #3 solenoid error
79 vehicle speed sensor (vss) circuit signal high
80 vehicle speed sensor (vss) circuit signal low
81 brake input circuit fault
82 ignition control (IC) 3X signal error
85 prom error
86 analog/digital ecm error
87 eeprom error
99 power management

May 05, 2011 | Buick Park Avenue Cars & Trucks

1 Answer

2007 Volvo XC90 fault codes-ECM P030000, P030100, P030300, P0304000, what do they mean?


first code means random/multiple misfire cylinder (s) detected
second code means misfire detected number 1 cylinder, third code, miss=fire number 3 cylinder fourth code misfire number 4 cylinder
causes can be spark plugs, HT leads, ignition coils, injector, wiring fault, low compression/ engine mechanical fault

Jun 04, 2010 | 2007 Volvo XC90 V8 AWD Sport

1 Answer

Looking to find out what Volvo error code 1633 means


Code 1633 is not a manufactures code, it is a genetic one, and is not as specific as a volvo code.
The best thing to do is take it to a volvo shop and get the specific code.
I did find a meaning for it------- speed signal missing or absent.
That could mean either a wheel speed sensor, or a vehicle speed sensor is at fault, that's why you have to get the specific code.

May 14, 2010 | 2001 Volvo V70

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...