Question about 2005 Ford Escape

Open Question

My 2005 ford escape has 8 codes po 302 po316 po133 po300 po301 po303 po304 p2195 and it want pull and makes a nosies on pass side of the bottom of the motor

I bought it the other day and started home and it was making a nosies on the pass side down at the axle then it stared to to pull I press on the gas pedal and it would not pull and didn't rev up and give me 8 codes

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 617 Answers

SOURCE: does anyone know what the code po316 is on the

P0316 .... Engine Misfire Detected on Start-up (first 1000 Revolutions)

P0300b .. Random/Multiple Cylinder Misfire Detected

P0304b .. Cylinder 4 Misfire Detected

P0357 .. Ignition Coil G Primary/Secondary Circuit

P0353 .. Ignition Coil C Primary/Secondary Circuit

From codes you need new spark plus, Ignition Wires, and ignition coils

Posted on Feb 07, 2010

Testimonial: "this veihicle has the coils over the plugs so there is no ignition wires per say just a plug in with regular wires"

  • 474 Answers

SOURCE: Idols rough won't go when giving gas. Dtc codes

Change the fuel filter and drive it about 30 miles. it should reset the codes to normal.

Posted on Feb 22, 2011

saa_aa
  • 241 Answers

SOURCE: have codes po300 po301 po302 po316

its like you have cylnder misfire or more , did you check all the wire .plug if any one bad or the wire have fire , and you check if the fuel pump good . i would like to ask you that , Did the problem come on suddenly or was some previous action or work done......

Posted on Nov 12, 2011

little_shaws
  • 493 Answers

SOURCE: 2004 ford escape with codes po316 and po 305

PO305 Miss nr 5 cyl. PO316 Miss in first 1000 revelutions after start. Check Nr 5 cylinder plug, plug lead or coil over plug or nr 5 coil. Not sure what system that has. I suggest replace plug regardless but look at plug for track marks down side of plug & worn electrode etc... if all ok there check nr 5 injector.

Posted on Jul 15, 2012

sales34864
  • 9 Answers

SOURCE: 2005 Ford Escape, put on diagnsotic machine, code

When you use the diagnsotic read out the fault code need use a tool which also can clean the fault code .And then the car will be renew.If,still runs slowly ,need check the other place of your car. Use a universal diagnostic tool will be ok . You can find the tool on the obd2tool website ,also can get some free technique support.Hope this can help you .

Posted on Aug 21, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 acura tl error codes po301 po302 po304 po306 p1399 po300


PO300 and P1399 are random cylinder misfire detected.
PO301 cylinder 1 misfire
PO302 cylinder 2 misfire
PO304 cylinder 4 misfire
PO306 cylinder 6 misfire
I would say that you have damage to the ignition wiring harness or you ECM is failing.

Feb 17, 2015 | Acura Cars & Trucks

1 Answer

2001 windstar im getting codes po172 po174 po301 po302 po 303 po304 po300 installed new coil pack twice new wires,plugs,cam and crank sensors,fuel andair filters,pcv valve and now get these codes. ...


Get your ECM replaced. Usually it's next to battery or inside front fenders. The rain must have shorted out connections and fried ECM. Engine will sputter until it is done. Usually autozone, advance auto, or dealer has ECM.

Apr 14, 2014 | 2001 Ford Windstar

1 Answer

2005 ford escape 3.0L misfire


That is an ignition coil malfunction on the primary side.

Jul 16, 2017 | 2005 Ford Escape

1 Answer

What's your problem? my 2004 mercury monterey has eight codes ,po301,poo53,po106,po316,po300,po304,po305,and po306


PO 300 is multiple misfires detected
PO 301, 304, 305, 306 are misfires in cylinders 1,4,5,&6
PO 053 is HO2S Bank 1 Sensor 1 Heater Resistance
PO 106 is MAP/BARO CKT Range / Perf
PO 316 is Misfire detected 1st 1000 Revs.

On a misfire, I usually push towards the spark plugs, plug wires, and coil packs / distributor coil.
You have PO 106 and PO 053 that need to be inquired about at nearest AutoZone.
They can give you an idea as to what is the problem on these.

Did a MAP sensor **** out and cause all the misfires ?
Did a misfire cause the MAP sensor error?
You see what I'm saying ?...Something caused all the misfires...thinking MAP...but not that familiar with the function of the MAP.

Hope this helps...

Aug 13, 2011 | 2004 Mercury Montery

2 Answers

Hello i have a GTI its a 2.0L manual transmission, i have been having problem after problem thus far. Current engine codes PO422, PO300,PO304,PO303,PO302. I do not have a code list to see what these are...


I think that PO422 is the Cat Converter, it may be bad or may be just the O2 sensor.
The PO300, 302, 303, 304 code have to do with the ignition coils or wires. (302, 303, 304 means there are ignition /firing problems in cylinders 2, 3and 4). If your lucky just the wire and new spark plugs.
Google "engine codes Jetta" for more on web. Good luck.

Feb 06, 2011 | Volkswagen GTI Cars & Trucks

3 Answers

CODES-PO301-PO303-PO316- CHANGED PLUGS & WIRES. STILL MISS ON START UP, GOES AWAY MOST OF THE TIME ABOVE 1000 R.P.M


P0301 - Cylinder 1 Misfire Detected.

Causes:
- Improper spark plug at cylinder #1
- Insufficient compression at cylinder #1
- Incorrect fuel pressure
- The injector circuit is open or shorted at cylinder #1
- Fuel injector #1 may be faulty
- Intake air leak

Solutions:
- Perform Injector Service
- Replaced Spark Plug #1
- Replaced Injector #1
- Replaced Ignition Coil #1

P0303 - Cylinder 3 Misfire Detected.
Follow info from P0301.

P0316 - Misfire Occurred In The First 1,000 Engine Revolutions.

Causes:
- Damaged CKP sensor.
- Ignition System.
- Fuel Injectors
- Running out of fuel
- Fuel Quality
- Base engine
- Damaged Powertrain Control Module

Solutions:
Usually the P0316 is combine with a P03XX codes. The P03XX code indicates in which cylinder the misfire occurred.

Jan 17, 2011 | 2002 Mercury Sable

2 Answers

Does anyone know what the code po316 is on the ford escape v6? there is also po300b,po303,po304b,po357and po353 codes


P0316 .... Engine Misfire Detected on Start-up (first 1000 Revolutions)

P0300b .. Random/Multiple Cylinder Misfire Detected

P0304b .. Cylinder 4 Misfire Detected

P0357 .. Ignition Coil G Primary/Secondary Circuit

P0353 .. Ignition Coil C Primary/Secondary Circuit

From codes you need new spark plus, Ignition Wires, and ignition coils

Feb 07, 2010 | 2005 Ford Escape

2 Answers

2005 Ford Escape, put on diagnsotic machine, code given were PO106, PO109, PO171, PO300, PO316 and P2195. I have changed the Oxygen sensor, spark plugs and checked all air lines for leaks, hte car thumped...


How is it running now? Is it still happening? After parts are installed, computer will have to be reset with the diagnostic scanner as well. You can go to autozone.com and register for full free online repair manual

Sep 11, 2009 | 2005 Ford Escape

Not finding what you are looking for?
2005 Ford Escape Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...