Question about Cars & Trucks
Sorry we do not have these instructions. Please contact the manufacturer
Posted on May 10, 2013
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: keyless entry remote
Check inside the remote case...there's instructions printed that tell you to hold the lock and unlock buttons for 7 seconds to reset the remote. I'm in the middle of replacing batteries myself. Let me know if it works.
Posted on Nov 07, 2008
No you do not need to scrap anything. Most of the starters at www.directwholesale.net will work with everything you have installed. Also its a good idea to leave all that stuff in anyway as it will take away from the resale value when you go to sell it. Most of the new remote starters will take place of the factory remote anyway so you will only need to carry one (provided you get the one that has all the features on it). If you get the cheapest one out there, you would still carry the factory remote as well (which is what I do myself). I would personally leave all the factory Honda System in and get the cheapest starter out there. Seems like this would 1.) be the best bang for the buck and 2.) not take away from the value of the vehicle since nothing would be removed. Thank you for using FixYa. Good luck to you!
Posted on Dec 08, 2008
SOURCE: keyless entry won't work
I have a 1999 BMW E46 I have had a problem with the keyless entry myself. I brought the car to BMW Dealer and they told me that my Lock had an issue and that they need to repair some wiring wich would cost me $1,023.98 to find out that it was a fuse that burned out. I have replaced the 5 amp fuse with another one but it burned the fuse again so I put a 10 amp fuse and i have not had a problems since. In my car is fuse # 54 if Im not mistaken. But waht you can do is open the fuse box which is located in your glove compartment look for a diagram that shows you which fuse is where it will give you a fuse name a number where the fuse is located and how many amps fuse it is.
Posted on Dec 23, 2008
Okay, here goes-
1. Turn Key to on position.
2. Push and hold **valet button on the stock radio.
**Valet button is skinny bar located between am/fm & cd/tape buttons on stock radio.
Door locks will cycle one time.
3. Press any button on remote one time within 20 seconds. Door locks will cycle again.
4. To program up to 4 additional remotes repeat step 3 for each additonal remote.
5. Turn key off programming is complete.
Thanks for using Fixya, please rate if this helps :)
Posted on Mar 16, 2009
Tips for a great answer:
Nov 30, 2013 | Oldsmobile Alero Cars & Trucks
May 10, 2013 | Cars & Trucks
Aug 16, 2012 | 2000 Oldsmobile Alero
Jun 26, 2012 | 2001 Oldsmobile Alero
Dec 15, 2010 | 1999 Oldsmobile Alero
Sep 01, 2009 | 2007 Ford Mustang GT California Special...
Oct 30, 2008 | 1998 Ford Contour
28 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: