Question about 2000 Acura TL

Open Question

What could be causing the horn not to work

Horn does not sound at all when being pressd

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 Mercedes Benz 320 4 door my horn is not working and also the front passenger window won't work or will work sometimes? Help Gloria


More than likely the window lift motor is defective and the cause is the brushes are sticking. Other causes are of course the switch and the wiring to the door. The horn needs to be tested, pull it out and hook a jumper to the battery and see if the horn sounds, if it does then you may need to replace the ribbon contact under the steering wheel it has a open filament circuit that is to the horn switch. NOTE always disarm the airbag system before doing any work on the steering wheel.

Apr 08, 2017 | Mercedes-Benz Cars & Trucks

1 Answer

Hi my car dies when clutch is pressd or when i change gears while AC on


Have you tried raising the idle speed another 100 rpms ?

Nov 15, 2013 | 2008 Ford Ikon 1.6

1 Answer

Horn not working fuse is good


Hi, you have to conduct a small test yourself to get the cause of the problem
Start by testing the horn itself. Run a jumper wire to the power connector on the horn, and to the positive battery terminal. When you touch the battery terminal, the horn should sound. If it does not, replace the horn.
If the horn is good, the problem is either in the switch in the steering wheel, or in the horn relay!!

May 15, 2011 | 2006 Ford Five Hundred

1 Answer

95 olds cutluss cieara horn dont work. horn sounded weak when it was dien 4 mths ago. then when i pressed it last it amped out the horn and radio. hasnt work since. cheeked fuses


Check that the horn itself is not worn out. If it's not sounding when grounding out, or it has a history of being faint in volume, then replace the horn.

Horns do go bad over time due to atmospheric moisture causing the contacts to corrode.

Aug 11, 2010 | 1995 Oldsmobile Cutlass Ciera

2 Answers

1989 toyota pickup horn not working, fuse is fine. I have an alarm, is that the same as the horn cause that works fine. Pulled alarm wires a while back and re wired them the sound works fine but horn just...


when I had that problem it was the contacts under the steering wheel pull the steering wheel and you will see a copper ring the horn is connected to ground out that copper ring against the steering column if the horn sounds you have a worn contact I fixed mine by putting a spacer under that copper ring good luck with it

Sep 01, 2009 | 1989 Toyota Pickup SR5

2 Answers

Horn blows fuses


you may need to put a relay in it as the current from the horn may be back feeding up the immobiliser horn circuit and causing a short. Sounds like the immobiiliser has its own source of power seperate from the factory circuit When you press the horn the power goes to the horn and up the immobiliser horn circuit and it blows the fuse.

Oct 14, 2008 | 1999 Volkswagen Jetta

Not finding what you are looking for?
2000 Acura TL Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...