Question about Cars & Trucks

1 Answer

Check engine litedoes not come on when i turn on the key

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 21,873 Answers

Year make and model ?
The warning light should be on the same circuit as the other dash lights and gauges. Have you checked the fuses for the computer ?

Posted on May 10, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

RESET THE CHECK ENGINE LIGHT ON THE 99 HONDA ACCORD


THIS IS HOW YOU RESET THE CHECK ENGINE LIGHT ON THE 99 HONDA ACCORD. 1. With the Car Off, Press and hold down the Odometer Trip Reset Button. 2. While still pressing the Trip Reset Button, Turn the Ignition Key half way on where all your oil, check engine lights etc.. turn on. Don't turn it as far as you would to normally start the car. Wait a few seconds and the Check engine light will turn off. 3. Turn the key back to the Off position and you're done. What a scam Honda has with the BS Check Engine Light.

on Dec 07, 2009 | Honda Accord Cars & Trucks

1 Answer

Turn key just a clicking noise. Lights come on. Check engine light on


A weak battery will make the lights come on & energize the solenoid for the starter, but the battery is too weak to make the starter motor turn. Checking the battery would be first, the solenoid second.

Oct 14, 2014 | 2003 Chevrolet TrailBlazer

2 Answers

2003 gmc savanna, wont start, new fuel pump and ignition cylinder, I turned key to on position, let sit for 15 min and still wont start just turns over


Find fuel test valve in fuel rail on top of engine. Take cap off valve. Turn key on. Push down valve with screw driver. fuel should squirt out. If not check fuse fuel pressure relay and bad wires. If fuel does come out, remove a spark plug from engine. Connect plug wire to plug. Ground plug against engine. Crank over engine and look for spark.

Nov 03, 2013 | 2003 GMC Savana

1 Answer

Won't start unless check engine light is on


I would suggest having someone check the circuits at the key switch.
The switch could be going bad.
The check engine and other warning lights must come on as a self-test when you turn the key on, then go off once the engine starts.

Jan 16, 2013 | 1995 Honda Passport

1 Answer

Engine turns over but will not start.


Hi there:

When the light comes on, one or more diagnostic trouble codes (DTC) are stored in the engine control module. These DTCs remain even if the light goes out. To address a Check Engine Light problem, the DTCs are retrieved and the appropriate troubleshooting information is followed in order to determine the problem.


Just scanned the computer and send us code number find it.

Hope helps.

Mar 14, 2012 | 1995 Dodge Ram 2500

1 Answer

The engine won't start


First, check your battery for proper voltage. Check with key off, key on and with key turned to start position.In start, voltage should not drop below 10.5. You did not mention if engine turns but does not start, what you hear or don't hear etc. With key turned to start, there should be 12v at the small terminal on the starter. Large wire on starter should have 12v all the time. Also check for good ground at block.
There's a lot more to this but if you do this, you're going in the right direction.

Feb 19, 2009 | 2006 Jeep Commander

1 Answer

Turn key many times before engine starts


sound like a dead starter but 1st check the battery therminal for dirt and bad contact pierre

Dec 13, 2008 | 2000 Chevrolet S-10

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...