Question about 2005 Volkswagen Polo 1.2
I have a 55 plate VW Polo and my reverse lights have stopped working. The bulbs are fine and I purchased new ones but still not working. I changed the fuse also but still have the same problem. Someone mentioned a switch how easy is it for me to look for and sort myself.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2001 vw polo
check your sensors 1st,all sensors must be good
if all sensors are working good than check your engine firing sequence,some times happens when sequence was wrong,
check your exhaust and carborator tuning pin that creates the batter combination for firing in bore for batter performance & less emitions ,so check is it ok or not than go to your nearest service center that havad certified mechanics,
till you read this you had solve this problem definatly,
Posted on May 18, 2008
the cover just pulls off and disconnect breather hose as u lift it.there is about 15 screws to remove then the cover opens
Posted on Jul 12, 2009
SOURCE: Removing VW polo 2005 battery?
Removing a battery from a Beetle is a bit complex and tricky. I just changed the battery in a 2003 2.0 Beetle. However, the process is very similar in a TDI Beetle. You will need more than your standard generic tool set in order to complete this task. Your tool list needs to consist of a pair of pliers (prefer locking type), a # 20 TORX head screwdriver (You will also need this if you ever plan on changing the Beetle's internal dash pollen filter for the A/C. ), a 10 mm and 13 mm sockets, a long extension and a wobble or universal to allow flexibility in tight spaces, an allen socket for removing the power steering reservoir, and a small adjustable wrench or a 10mm to remove the battery cables. If you are changing the battery you might as well buy a new Air filter since you will need to remove the air box in order to replace the battery. If you do change the air filter you will need a phillips head screwdriver.
1. Pop the hood.
2. Remove the two 10 mm bolts that hold down the air filter box.
3. Undo the clamp that holds the large tubing to the air box using your pliers. Move the tubing away from the box.
4. Unclip hose attached to the back of the air box near the large hose (under it).
5. remove the small breather hose from the air box.
6. Pull air box up and out.
7. Remove snap on cover from top of battery.
8. Remove small snap on wiring cover from back of the battery covering.
9. Unbolt power steering reservoir (next to battery case).
10. Disconnect the battery cables. Positive side first.
11. Remove the 13 mm bolt at the base of the battery along with the hold down clamp.
12. Pull the top wiring away from the battery case and then slide the battery towards the engine.
13. Remove the plastic battery case.
14. Remove the battery
Posted on Oct 07, 2009
Crankshaft sensor is located on the right side of the cylinder block behind or under the starter. It is fitted into the rear crankshaft oil seal hausing
Posted on Sep 12, 2010
Tips for a great answer:
Jun 03, 2017 | Cars & Trucks
Mar 09, 2017 | Cars & Trucks
Nov 08, 2014 | 2005 Volkswagen Polo 1.9
Nov 19, 2013 | 2001 Volkswagen Euro Passenger
Nov 05, 2012 | Cars & Trucks
Aug 13, 2017 | Volkswagen Cars & Trucks
Feb 19, 2012 | Volkswagen Polo Cars & Trucks
Jan 01, 2011 | 2005 Volkswagen Jetta
Feb 13, 2010 | 1999 Volkswagen Golf
360 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: