Question about 2006 Jaguar X-Type

Open Question

P2098 what this code mean

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


P2096 or P2098 Post Catalyst Fuel Trim System Low Limit
Possible Causes:
  • Malfunctioning fuel injectors
  • Low fuel system pressure
  • Fuel that is contaminated
  • Missing, loose, or leaking exhaust components from the HO2S forward
  • Vacuum leaks
  • Ethanol concentration greater than 15 percent
  • Incorrect PCV system operation

Mar 17, 2015 | 2009 Pontiac G8

1 Answer

06 vw passat with code po 2098 possible problem and a possible fix

If you mean P2098 read on, Po 2098 is not a vaild code, all codes for OBD2 have one letter (P, B, etc.) and four numbers 0-9.
P2098 VOLKSWAGEN - Post Catalyst Fuel Trim System Too Lean Bank 2
Possible causes- Low fuel pressure
- Engine misfire
- Large vacuum leak
- Blocked converter
- Faulty O2 sensor bank 2

Read more:

Nov 11, 2012 | Cars & Trucks

1 Answer

2004 x-type 3.0 v6 152,000 miles showed codes P0171, P0174, P2096, P2098, P0101, P0171 pd, P1000.

check for vacuum leaks or a faulty mass air flow sensor. all the codes have to do with engine too lean(too much air).

Jun 09, 2012 | Cars & Trucks

1 Answer

Check engine Light came, code is p2098. What is it?

P2098 Post Catalyst Fuel Trim System Too Lean (Bank 2) have you used any fuel additive lately? that will toss that code, But basically its a o2 sensor

Jul 06, 2011 | Ford F-150 Cars & Trucks

1 Answer

My 05 sebring has the engine code p2098 the car has a 2.7 engine ,has had all 4 oxygen sensors replaced. the car will not stay running unless you keep your foot on the gas until it warms up. the engine cod...

The code p2098 is for a "lean" condition... Hold on a minute. An oxygen sensor cannot know if an engine is running lean it can only know there is oxygen remaining in the exhaust. The PERSON who wrote the code description assumes the engine does not have a mis-fire condition and that the exhaust system is intact.
Does the car run smooth? The fact that you have to keep the throttle open until it warms up makes me think not.
The car MUST run on all cylinders ALL THE TIME, and the exhaust system can have NO LEAKS upstream from the O2 sensor before the O2 sensor codes have any meaning.
These problems will cause the ECU to go full rich PRIOR to setting the code. Fouled spark plugs are a likely result. Also check the engine oil for the smell of gasoline. Full rich causes fuel to pass the piston rings and end up in the oil. If there is even the slightest hint of gas smell in the oil then change it.
If all of the above are true then act on the lean condition code by finding the culprit from this list:
  1. Vacuum leaks
  2. Low fuel pressure
  3. Bad injector
  4. Bad MAP and/or MAF
  5. Bad IAT

Mar 04, 2011 | Chrysler Sebring Cars & Trucks

1 Answer

My 05 chrysler sebring has engine code p2098 what is the problem

Are you sure that is the right code? I don't see that one in the book.

Mar 01, 2011 | Chrysler Sebring Cars & Trucks

1 Answer

I have a 2004 Dodge Stratus with just under 80,000 miles on the odometer. I recently got a P2098 error in the car. I replaced the 02 sensor and reset the computer. Now the code is back. Did i miss...

This would refer to the "down stream" sensor, which would be past the catalytic convertor. You may also have an exhaust leak near the cat, contaminated fuel or maybe even low fuel pressure.

Mar 18, 2010 | Dodge Stratus Cars & Trucks

1 Answer

What is a p2098 on a 2005 jeep grand

P2098 = Post Catalyst Fuel Trim System Too Lean Bank 2

Sep 08, 2009 | 2005 Jeep Grand Cherokee

Not finding what you are looking for?
2006 Jaguar X-Type Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

79865 Answers


Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides