Question about Cars & Trucks

Open Question

Oil capacity of 4d56 turbo engine - Cars & Trucks

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 94 Answers

SOURCE: anyone know the engine oil capacity for a 97 2.8

Hi, your engine oil capacity for your 2.8 is 7.8 litres of oil including new filter,when you have done this start car and wait until oil light go's out this will indicate that the oil filter is full with oil,turn off engine and check oil level on dipstick again.
hope this helps you.
George.

Posted on Jul 13, 2009

Ad
steve_e_uk
  • 1675 Answers

SOURCE: pajero valve clearance

hi the clearance on these will be 0.25 hot ( just run ) and the reason why you have oil coming out from dip stick is either you have too much oil in and need to drain some, or somewhere on the vacuum system you might have a blockage which in turn is casing a pressure build up and is forcing the oil out...hope this helps

Posted on May 31, 2010

  • 55 Answers

SOURCE: I noted an oil leak

The play in the turbo is why you have the leak with out rebuild shop tools all you can do is change the turbo (if a lot of oil gets into inlet
system engine can run away and will not stop ((English mechanics
call this drinking its own blood)))

Posted on Oct 24, 2010

elix0411
  • 3530 Answers

SOURCE: 4D56 turbo diesel engine in

Welcome to Fixya
Error 41 is the butterfly spindle in the intake manifold just below where the hose from the intercooler joins. It should be open when engine running if it is closed it will cause boost issues and running problems.
Thank you for using Fixya!

Posted on Jun 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Head torque specification for l200 4d56 DID DOHC 2007


what car? and year>? and country , so we can look it up in our
great online sources. (all 3 must be known)
in the USA we use alldata.com (or the dealer FSM)

i guess you dont know that some heads are not torqued, or use TTY bolts, right? some are set by ANGLE degree.
that is covered in the FSM all that. the facts.
most head failures result from guessing.
or asking here, with no facts on car.
some engine run different heads, and different if turbo.

case in point, all this Mitsubishi engines

my guess
Mitsubishi Triton

Oct 24, 2014 | Cars & Trucks

1 Answer

Can 4d56 engine fit in a 4m40 frame?


Probably, but why would you do this? The 4d56 is 2.5L, the 4m40 is 2.8L, some come with a turbo. You would have a loss of performance, and have all sorts of issues with fabricating bits and pieces to make it fit, plus all the injection and control issues.

Oct 08, 2014 | 1996 Mitsubishi Delica

1 Answer

Where is MAF/MAP on Mitsubushi 4D56 turbo diesel?


I suggest download this specific Factory Service Manual: Mitsubishi FSM Engine 4D56-25-diesel

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 13, 2012 | Mitsubishi Delica Cars & Trucks

1 Answer

Halo po curios lang ang 4d56 diesel engine na hindi turbo pwede ba ma convert to with turbo


YES, GO AHEAD... OK LANG YAN.. THERE WILL JUST BE A SLIGHT LESS POWER SA NONE TURBO... A GOOD DRIVER CAN ADJUST THE VEHICLE PERFORMANCE ON THE ROAD.

Aug 29, 2011 | 1988 Mitsubishi Pickup

1 Answer

I noted an oil leak from the compressor side of my turbocharger.Also the shaft has a slight side to side play.Is this normal? The turbo is fitted on a Mitsubishi Pajero,engine model 4d56


The play in the turbo is why you have the leak with out rebuild shop tools all you can do is change the turbo (if a lot of oil gets into inlet
system engine can run away and will not stop ((English mechanics
call this drinking its own blood)))

Oct 24, 2010 | Mitsubishi Outlander Cars & Trucks

2 Answers

Pajero valve clearance 4d56 turbo and why engine oil pop out from dip stick while enging runing?


hi the clearance on these will be 0.25 hot ( just run ) and the reason why you have oil coming out from dip stick is either you have too much oil in and need to drain some, or somewhere on the vacuum system you might have a blockage which in turn is casing a pressure build up and is forcing the oil out...hope this helps

May 31, 2010 | Mitsubishi Passenger Cars & Trucks

5 Answers

4d56 engine high fuel consumption


4d56 is a diesel engine, fuel, oil, air filter change definitely, regular oil change, check tyre pressure, etc all basic things u can do yourself, after all its no 40+ MPG modern diesel engine its been around for years and years and being used in courier van, pajero and delica, i have a Delica with 4D56 turbo and its loves drinking diesel like no tomorrow, run it on veggie oil like i do you wont worry too much about your fuel consumption.

Jan 06, 2010 | 1987 Mitsubishi Passenger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

495 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...