Question about 2002 Kia Rio
Engine runs rough and check engine light comes on. If I shut engine down and restart engine light goes off. No codes stored. If I check code while light is on comes up with two codes p004 and 1100.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Check Engine light
that code definition is "Evap high purge flow fault". It means you may have a problem with the evaporative system. this system routes fuel fumes back to the fuel tank. If you want to try and clear this code, find the radio code for your car and then disconnect the battery for 30 seconds. Reconnect the battery and the check engine light should be out. You will then need the radio code to reset your car stereo. the check engine light may stay off if the condition was a transient one. If not, the light will come back on after you drive the car two drive cycles. That is: two starts, warm ups and shut downs. If the light returns, have a mechanic check it out.
Posted on Jan 22, 2009
SOURCE: Check Engine Light
check all hoses on vehicle especially around canister and make sure u have a factory gas cap
The canister purge solenoid is part of the evaporative emissions system. When it is commanded "open" by the PCM (computer), it allows fuel vapors in the fuel system to enter the engine. This solenoid basically acts as a valve regulating fuel vapor flow to the air intake system. By burning these vapors in the combustion process, the evaporation system helps to lower overall vehicle emissions. The solenoid circuit refers to the wiring used to control the function of this solenoid, and usually runs between the solenoid and the vehicles PCM.
any defect in the above mentioned canister working will cause your problem to happen
Posted on Aug 15, 2009
Testimonial: "Thank you, exactly what I needed to know!!"
CODE P0128- THERMOSTAT MALFUNCTION. POSSIBLE CAUSES 1. ECT SENSOR IS OUT OF CALIBRATION. 2. CHECK THE OPERATION OF THE THERMOSTAT IT MAY BE STUCK OPEN.3.INSPECT FOR LOW COOLANT LEVEL OR FOR AN INCORRECT COOLANT MIXTURE.
Posted on Jan 06, 2010
Tips for a great answer:
Feb 28, 2014 | 1999 Mercury Villager
Mar 01, 2011 | 2001 Jeep Cherokee
Apr 04, 2010 | 1996 Dodge Ram 1500 Club Cab
Mar 08, 2010 | 2005 Honda Odyssey
Jan 04, 2010 | 2003 Ford Thunderbird
Oct 16, 2009 | 1999 Ford F350 Regular Cab
Feb 22, 2009 | 1991 Honda Civic
Dec 30, 2008 | 1999 Chevrolet Silverado 1500
Oct 10, 2008 | 2000 Oldsmobile Alero
31 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: