Question about 2007 Dodge Ram 2500 Mega Cab Laramie
Posted by Anonymous on
It is normal for all the lights on the dash to blink when turning the key ON for the first time. However, the light should turn off after few seconds. If it does not, you should better get the codes read.
Posted on May 10, 2013
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
U0155 definition is lost communication with the ipc control mod , (instrument panel cluster) , reasons include faulty IPC , loose / bad connections at IPC , i read some forums and and some found connection issues at fuse box , when the problem exists you could try wiggling wires at behind fuse box or the back of the IPC try to locate source if indeed it is a connection issue .
Posted on Dec 26, 2008
SOURCE: Check engine light
RE: Check Engine Light
The check engine light may come on for several reasons
It is not necessary to worry as it may be as simple as putting the gas cap on without fully clicking it shut!. If this is the case it will go away by itself in about a week at most!
You can take your car to an auto parts store to have them run a diagnostic (Some will do this for free).
If your car is running fine, re-tighten the gas cap, give it a week or have it diagnosed if you still feel uncomfortable with it.
Posted on Feb 28, 2009
no if you took it to autozone obviously you have a good ign coil.im sure you have tried turning the wheel at the same time you turn your key. other than that i would replace the lock cylinder and key.
Posted on Apr 19, 2009
I had a similar problem with the engine check light coming on and going out. It did that for almost a year. It would stay on for days at a time then go out and not come on for days. Finally the truck wouldn't start at all no matter what.
It was my crankcase sensor..............$300.00
Hope this helps.
Posted on May 01, 2009
SOURCE: check engine light on code
This trouble code is Evap Purge System Performance fault. 1) Check for a loose or missing fuel cap. 2) Check for a damaged or missing fuel cap seal. Recheck for other trouble codes. This fault wont cause the stumblering problem. It turns on the MIL lamp to say there leak in the EVAP system.
Posted on May 10, 2009
Tips for a great answer:
May 23, 2016 | Dodge Ram 1500 Cars & Trucks
Jan 21, 2015 | 2003 Dodge Ram Pickup 1500
Aug 21, 2012 | 1996 Dodge Ram 1500 Club Cab
Aug 21, 2010 | 1994 Dodge Ram
Sep 30, 2009 | Dodge Ram Pickup 1500 Cars & Trucks
Apr 18, 2009 | 2004 Dodge Ram 1500
Mar 23, 2009 | 1998 Dodge Ram 2500 2WD
Dec 04, 2015 | 2007 Dodge Ram 2500 Mega Cab Laramie
114 people viewed this question
Usually answered in minutes!