Electric window 95 wrx

6ya staff

• 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Download 6ya

6ya.com

Need repair answers fast Use 6ya to...

Posted on Jan 02, 2017

bill willis

• 398 Answers

SOURCE: Driver side electric window doesn't

I would rather believe that your problem is not in the switch, but in the mechanism itself. In any case the door panel must be removed to diagnose this problem.

Posted on Aug 06, 2008

Billy Alexander

• 10 Answers

SOURCE: Driver's window on my 2001

Sounds like either the window switch is broke or the motor in the door needs to be changed out.

Posted on May 30, 2011

SOURCE: Power window on driver's side

the only way to answer that is to pull the inner door panel off and jump 12V right to the regulator motor. If it runs, then it is the switch, if not then you need a new regulator. The regulator however has a moving part, being the motor. moving parts wear out faster. And 10 years is about the lifespan of a window motor, and the driver's door gets the most use so it usually dies first. So the default setting is to do the regulator.

Posted on Jun 20, 2011

dttech

• 4803 Answers

SOURCE: 97 Chevy Blazer Driver's side electric window

Is it making any noise at all when you push the button? If it is making noises, then you probably have a broken window regulator. If is is not doing ANYTHING, then you probably have a bad switch or a bad window motor.
You can find out which it is by popping the switch out of the door and checking for power and ground at the switch connector. (back-probe the connector with it still connected to the switch)
The circuits to the driver's door motor are Connector C2 - DARK BLUE Pin "A" and BROWN Pin "E" (C2 is the Long, 8-pin connector)
BOTH of these wires shouldbe GROUND when the switch is in the NEUTRAL position. Then with the ignition switch ON, the BROWN wire will switch from GROUND to POWER when the switch is pushed "DOWN". The DARK BLUE wire will do the same when the switch is pushed "UP".
If these are not doing as described, replace the switch. If they are switching properly, then you need to check for power and ground at the motor connector. - chances are it needs a motor, but you need to check the power and ground just to make sure you do not have a broken wire between the switch and the motor.

Posted on Sep 21, 2011

SOURCE: Why won't electric seats work?

Check the fuses, if those are good and that is a bench seat, test the control, if the control is good replace the electric motor.

Posted on Nov 23, 2011