Question about Cars & Trucks
Posted by Anonymous on
Please get the codes read before jumping into any conclusion and spending on parts.
Posted on May 09, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Remove cover from the relay and fuse box under the hood. Find the fuse for the ECM and remove. Wait 20mins and replace. If the light comes on again see a mechanic. I've had this problem over about 10 years and it is only a false alarm. If the problem persists see a mechanic. DO NOT TRY TO USE ANY CAR BATTERY POWERED DEVICE IN THE CAR UNTIL THE FUSE IS REPLACED
Posted on Jun 15, 2009
that code means that the coolant is cooler than it is supposed to be and it cannot be regulated...which means the thermostat is stuck open or broken,so replace the thermostat and that should solve your problem,hope this sheds a little light on it!
Posted on Sep 26, 2009
It may have a faulty cluster. Or possibly could have a charging system problem.
Take it to a dealer and have it scanned for codes.
The instument cluster is a module that can store trouble codes. If the cluster is at fault the new one will have to be programmed to the vehicle to work correctly.
Posted on Oct 18, 2009
Tips for a great answer:
Jan 20, 2015 | 2003 Isuzu Ascender
Oct 13, 2014 | 2004 Isuzu Ascender
Aug 31, 2014 | 2005 Isuzu Ascender
Jan 13, 2014 | 2006 Isuzu Ascender
Oct 01, 2012 | 2005 Isuzu Ascender
Replace the AIR pump AND one-way check valve
Test and clean the AIR pump AND test and replace the one-way air check valve
Replace the AIR pump inlet hose
Replace the AIR pump fuse (found under the hood)
Jul 29, 2011 | 2005 Isuzu Ascender
Nov 10, 2009 | 2005 Isuzu Ascender
Oct 09, 2009 | 2003 Isuzu Ascender
Sep 26, 2009 | 2005 Isuzu Ascender
Jan 31, 2009 | 2004 Isuzu Ascender
Jun 19, 2018 | Cars & Trucks
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: