Question about Cars & Trucks

Open Question

Misfire p0300, p0304, p0456, p0442,p0132

My vehicle check engine light is coming on and flashing and it is getting a missfire on many cylinders along with a pesky fuel evap leak that we haven't located anyone know what to do or how to go about these issues?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
roedmondson
  • 68 Answers

SOURCE: 2000 CIVIC System too lean Cylinder 3 and 4 misfire Deteced

  1. P0171: This means that the oxygen sensor has detected a lean air-fuel ratio. This can be caused due to a vaccuum leak or a problem in the HO2S circuit or the HO2S (Heated Oxygen Sensor) itself. (Bank one Sensor one). This is commonly located along the exhaust pipe. It could also be a bad Mass Air Flow sensor or a bad Engine Coolant Temperature sensor. Diagnostic checks will be needed to be carried out to be verified though
  2. Well as for the other codes, it means #3&4 cylinders are misfiring. It is a possibility that the P0171 code mite have caused the others to show up. I can be wrong though. But it is a strong possibility. If the air fuel mixtue is too lean indeed, mis-firing will occur, unless it is an actual electronic and not a mechnical problem. By the way, when these codes appear, how is the engine's performance. Does it remain the same or behaves poorly?

Posted on Feb 14, 2009

Ad
  • 1 Answer

SOURCE: random misfire p0300, cylinder 3 and 4 misfire p0303,p0304

change spark plug wires and check corrosion in the distributor coil

Posted on Apr 03, 2009

  • 51 Answers

SOURCE: start and diesss

p0456: evap system. sensor failure
p0172: evap system. intake blocked
p0778: exaust valve control. solenoid/ecu faukt
p0300: cylinders misfire. check ht/ignition leads
p0301,303,304,305,306: same ht leads

hope this helps..

Posted on Apr 27, 2009

  • 2 Answers

SOURCE: Misfire with error codes P0300,P0302,P01303, P0102, P0748

have you checked the wires for holes.

Posted on May 28, 2009

motor1258
  • 6674 Answers

SOURCE: Misfire in 97 voyager,P0300 and P0304,HELP! Need 2 get inspection

I'd have fuel pressure checked, and at the very least, replace fuel filter. Not unusual to get multiple misfire codes due to low fuel pressure, thus starving cylinder(s), and causing the misfire code(s).

Posted on Apr 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 sienna with codes p0300,p0301,p0304 and p1150. Experience less power and a little vibration. Engine light flashes.


The p0300 codes are engine misfire codes cylinder 1 and 4 the light is flashing because misfires can damage the cat. Convertor 1150 is an o3 sensor code possibly an effect not a cause I would see if 1and 4 utilize the same ignition coil first

Feb 24, 2015 | Cars & Trucks

1 Answer

Failed tcm


There is no TCM in sunfire only truck have a TCM
you might want to say
PCM and engine soon light flashing cause of misfire engine ....retrieve code and you see P0300 or P0301 or P0302 or P0303 or P0304 .the last number is for the cylinder number misfire and the P0300 for multiple misfire
hope it help

Mar 18, 2014 | 2001 Pontiac Sunfire

1 Answer

Vehicle missing,shaking,engine light comes on


Misfire could be a number of things:
a) spark plugs - change them if used over 15K miles - inspect/regap.
b) spark plug wires - change them if over 15K miles - inspect
c) ECM (electronic control module) - test with HEI (high energy ignition) tester.

The shaking tells me that the engine is running on less than its normal compliment of cylinders - the shaking is produced by the imbalance caused in the engine by one (or more) cylinder(s)
not firing at all.

The "Check Engine" light probably is coming on due the the misfire condition. Go to Pep Boys or
Advance Auto Pats, where they'll tell you (free) your codes causing the "Check Engine' light to be
lit - the code coming from your truck's computer will probably be one or more of:
P0300 - Random/Multiple Cylinder misfire detected
P0301 - Cylinder 1 misfire detected
P0302 - Cylinder 2 misfire detected
P0303 - Cylinder 3 misfire detected
P0304 - Cylinder 4 misfire detected
P0305 - Cylinder 5 misfire detected
P0306 - Cylinder 6 misfire detected
P0307 - Cylinder 7 misfire detected
P0308 - Cylinder 8 misfire detected
P0313 - Misfire detected with low fuel

Jun 23, 2011 | 2004 Ford F150

1 Answer

Mazda mpv 2004 code p0304


Engine missfire Cylinder #4

P0300 at P0304 Diagnostic Code - Random Misfire
Technical Description
Random/Multiple Cylinder Misfire Detected

What does that mean?
Basically this means that the the car's computer has detected that not all of the engine's cylinders are firing properly.

A P0300 diagnostic code indicates a random or multiple misfire. If the last digit is a number other than zero, it corresponds to the cylinder number that is misfiring. A P0302 code, for example, would tell you cylinder number two is misfiring. Unfortunately, a P0300 doesn't tell you specifically which cylinder(s) is/are mis-firing, nor why.

Symptoms may include:
* the engine may be harder to start
* the engine may stumble / stumble, and/or hesitate
* other symptoms may also be present

Causes
A code P0300 may mean that one or more of the following has happened:
* Faulty spark plugs or wires
* Faulty coil (pack)
* Faulty oxygen sensor(s)
* Faulty fuel injector(s)
* Burned exhaust valve
* Faulty catalytic converter(s)
* Stuck/blocked EGR valve / passages
* Faulty camshaft position sensor
* Defective computer

Possible Solutions
If there are no symptoms, the simplest thing to do is to reset the code and see if it comes back.

If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors.

Random misfires that jump around from one cylinder to another (read: P030x codes) also will set a P0300 code. The underlying cause is often a lean fuel condition, which may be due to a vacuum leak in the intake manifold or unmetered air getting past the airflow sensor, or an EGR valve that is stuck open.

Hope help with this (remember comment and rated this).

Apr 24, 2010 | 2005 Mazda MPV

2 Answers

2001 audi a4 1.8 random misfire


do a compression test then do a combustion pressure test if all good computer is questionable

May 25, 2009 | 2001 Audi A4

1 Answer

Start and diesss


p0456: evap system. sensor failure
p0172: evap system. intake blocked
p0778: exaust valve control. solenoid/ecu faukt
p0300: cylinders misfire. check ht/ignition leads
p0301,303,304,305,306: same ht leads

hope this helps..

Nov 25, 2008 | 2006 Hyundai Santa Fe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...