Question about 1984 Toyota Celica Supra

Open Question

Supra runs on 5 cylinder

Hello dear Supra people :-) I once again need some advice for my car. ********* My Supra, boots up fine on all 6 cylinder ... but when it reaches operating temperature ... turn it off at the last cylinder no 6 .. toward the windshield ... but when driving around 2000 rpm ... No problem .... the problem is when it is running at idle ... and by removing the spark plug is wet with petrol ..... new power caps and new spark plugs installed .... have ordered new ignition cables ... . So my question ..... it's cable or something else ..... Thanks in advance. Elo Jensen.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 12 Answers

SOURCE: 2000 toyota tundra #5 cylinder misfire

i think #5 is on driver side the front one....

Posted on Dec 30, 2008

Ad
blueextc3221
  • 15935 Answers

SOURCE: I need the firing order for the spark plugs and plug wires I recently changed them and something is not in the correct order

0c41a37.gif
Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question!

Posted on May 23, 2009

  • 6 Answers

SOURCE: 2000 toyota 4runner pulling a random misfire in

try a new crankshaft sensor not hard to change 2 bolts and a wire

Posted on Jul 30, 2009

hotguy987543
  • 4 Answers

SOURCE: I have no ignition spark on my 1983 Toyota supra

the question is is there spark from the ignition coil directly or from the dristributor try ecu cam postion sensor distributor i have a 1986 toyota supra 7m ge i cant get mine started so i was checking around and found out different things that would keep my car from running or running rough try fuses also

Posted on Mar 15, 2010

  • 156 Answers

SOURCE: 1998 camry 5sfe engine, surging at idle

Check for air leaks in the vacuum pipes in and around the inlet manifold, they have a habit if going brittle and splitting.
Another possibility is the temp sender , if the ecu thinks the engine is too cold it will compensate causing the engine to " hunt". This can be something as simple as a worn radiator cap seal letting air into the cooling system and tricking the sensor.
Hope this helps, Marshall

Posted on Apr 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Misfired cylinder 6, replaced coil, plug Misfired cylinder 5, replaced coil, plug Misfired unsure which yet, all of these happening within a week. It will run fine for a day or so after rep


change all plugs with proper ones - they are picky for some reason - do not change number or brand from original - coils were probably ok, - get some injector cleaner and run through it but check for exhaust leak at e g r tube - is a common over looked cause of misfire - a thing to keep in mind is misfire isn't always spark issue. hope I was of some help

Apr 20, 2014 | 2003 Lincoln Town Car

1 Answer

Supra runs only on 5 cylinder


Could be misfire ;coils , plugs,wires.

May 08, 2013 | 1984 Toyota Celica Supra

1 Answer

Mazda 2002 MPV cylinder 3 missfire


was the any oil on the coil boot? you can have a weak injector or a stuck vavle

Oct 31, 2012 | 2002 Mazda MPV

1 Answer

What's the order for the wiring of the Spark plug for a Toyota Supra Turbo 1988???


cylinders are numbered from front to rear---1,2,3,4,5,6

The distributor number one terminal is the one to the immediate left of the top distributor cap mounting screw.

The firing order is 1-5-3-6-2-4

Feb 16, 2011 | 1988 Toyota Supra

2 Answers

What is the firing order for a 94 aerostar with a 3.0 six cylinder


Firing order: 1-4-2-5-3-6
Below are the cylinder numbers:
Rear of vehicle 3 - 6 2 - 4 1 - 5 Front of vehicle

Oct 03, 2010 | 1994 Ford Aerostar Extended

1 Answer

I need to remove my number 6 ignition coil but


Hello. Here is the order of things for your truck. The engine firing order for either 4.6L or 5.4L V8 is 1-3-7-2-6-5-4-8. Cylinders are numbered, 1-2-3-4 on the passenger side bank of cylinders beginning at the front of the engine. Cylinders are numbered, 5-6-7-8 on the driver side bank again, beginning from the front of the engine to the back.
Soooooooo the number 6 is the second one from the front of the engine on the drivers side.

Nov 20, 2009 | 2001 Ford F150 Styleside SuperCrew

1 Answer

1987 supra turbo master cylinder troubleshooting


Jack up the car with adequet support have someone work the clutch in and out,obseve the slave cylinder when the clutch pedal is realeased--is it free or hanging up -still tight then problem with the master or slave.If not then the clutch plate may be stickly on the splines when cold,

Nov 09, 2009 | 1990 Toyota Supra

1 Answer

Timing Dpecs for Toyota Supra 87 6 cylinder


1987 non-turbo: 10 deg Before Top Dead Center (BTDC) @700 rpm
1987 Turbo: 10 deg BTDC @650 rpm.

To set the timing, you will need to connect a jumper wire between terminals E1 and TE1 on the diagnostic terminal. This diagnostic terminal is located just aft of the engine compartment fuse box. It is a black plastic box marked "diagnostic" on the cover, which flips open to reveal the terminals inside. There is a diagram on the inside of the cover which explains the terminal positions. On the Turbo model, you need to remove the forward section of the engine cover to gain access to the number one spark plug wire.

Jul 25, 2009 | 1987 Toyota Supra

2 Answers

I have a 2004 Lincoln LS 3.0 6 cylinder. My wrench light


dealer only,encrypted software used and manufacturers patented pin connections in the OBDII connector

Jul 17, 2009 | 2004 Lincoln LS

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...