Question about 1999 Ford Expedition

Open Question

Replace washer reservoir wiper windshield fluid

Reservoir leaking

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 25 Answers

SOURCE: windshield wiper fluid does not spray and how does it turn on?

The washer pump should be in the resivoir bottle...remove the plug on the bottom of the resivior and check it for power when the washer button ie pushed... if you have power, then you should replave the washer motor...
Please rate this,
Rob...

Posted on Sep 21, 2008

Ad
chrischronic
  • 235 Answers

SOURCE: windshield washer will not work even though the wipers do on a fo

check the fuse, if its ok youre gonna need a new pump.

Posted on Jan 15, 2009

oldfishead
  • 155 Answers

SOURCE: Windshield washer not working properly

If you have used ANYTHING beside windshield solvent in you reservor, you may have created WAXING from soap in the bottom of washer tank, which clogs pump,lines, and nozzel....take the tank out and wash it..disconnect washer hoses at nozzel and clear with compressed air along with the nozzel...if you use solvent only you may have a worn washer pump or restriction...check those and good luck.....

Posted on Jul 04, 2009

  • 3 Answers

SOURCE: Ford Windshield Washer Resivoir Leaking

Check the lines from the reservoir to the sprayers to make sure somet hose didn't come out from some fitting. If that doesn't work, you might just replace the lines (I had that happen to my parent's ford mini van). If you see the leaking coming from the hose coming from the reservoir, try pushing the hose back onto the fitting (had that happen to my Ford Bronco II). If all that fails, replace the reservoir.

Posted on Jul 17, 2009

01fordeb
  • 1033 Answers

SOURCE: 1998 ford expedition front windshield washer

fuse for washer pump, can you here the pump, if not then power to pump isn't present. Check the fuse for it.

Posted on Jan 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Loses water from resevoir but not from radiator


So the level keeps dropping in the reservoir? If you have to keep adding coolant to the reservoir, the system is leaking or losing coolant somewhere. Have the system pressure tested to find the leak. Is the reservoir itself leaking? When the level gets low enough, first the reservoir will go dry, then the radiator level will start to drop.
Here's how the reservoir works: coolant is under pressure from the radiator cap seal. As coolant heats up from hot engine, it expands, and pressure forces the radiator cap seal up, coolant is forced into the reservoir-remember the hot mark on the reservoir? When car is shut off, coolant contracts, creating a vacuum in top of radiator. This vacuum works to suction coolant back from reservoir into the radiator, keeping the radiator topped up, and coolant should now be at the lower cold mark on the reservoir. It is a closed, sealed system. The only loss of coolant will be a very small amount of evaporation from the reservoir. If coolant level keeps dropping, there is a leak somewhere.

Nov 22, 2013 | 2000 Jeep Grand Cherokee

1 Answer

Pickup leaks ps fluid from the reservoir changed ps pump and cap still leaking any ideas


Check valves on steering box. What is happening is that the pump is returning more fluid to the reservoir than what it is using to move the box.

Apr 06, 2013 | 1992 Toyota Pickup

2 Answers

Leaking screen wash bottle


You'll need to pull the bottle out to see where the leak is occuring. Look for

* split hoses from the pump(s). This is the more likely cause of the leak.
* pump O-rings. Remove and clean, and reassemble.

If the bottle itself has a crack or split, I've had success using a large 40W soldering iron with a flat tip to to CAREFULLY heat the plastic (often something like nylon) and effectively weld the split back together.

Sep 07, 2011 | 2005 Volvo V50

1 Answer

My power steering pump resevoir is leaking any ideas.


Is it leaking out of the reservoir itself,or is it leaking out f the reservoir cap? If the power steering is overfilled, it will leak out the vents in the cap when the fluid gets hot. It may also be a bad seal on the cap. Replace the cap if the seals are bad. If the reservoir itself is leaking, the only option is to replace the reservoir.

Jul 31, 2011 | 2001 Honda Odyssey

2 Answers

I'm gettind a small brake fluid leak just below the resivour on the master cylider. Any ideas?


the reservoir sits on top of the plunger mechanism and there are rubber o rings under the reservoir that are probably weak and leaking.

Feb 07, 2011 | 2000 Land Rover Discovery

1 Answer

Antifreeze leak


had this same problem . it was the reservoir had a crack in the bottom, it is something you can do at home but it takes alittle time hardest part was gettin the hose back on the reservoir. and by the way the reservoir cost is about 250 and some change.

Mar 28, 2010 | 2001 Lincoln LS

1 Answer

1999 Caravan washer fluid reservoir looks like fluid leaks from under the reservoir what might it be and how do you fix it?


sounds like a cracked reservoir, you can replace the unit or find the leak and repair it with some plistic weld.

Sep 18, 2009 | 1999 Dodge Caravan

1 Answer

Windshield washer fluid reservoir - MB ML 350


right where the lines connect to reservoir, has little black seals that leak. I recommend removing reservoir, empty it out, then use RTV silicone and place it between seals and reservoir. Let it dry for FULL day. than reinstall.

Jun 23, 2009 | Mercedes-Benz ML350 Cars & Trucks

1 Answer

AC AIR BLOWS BACK AND FORTH FROM DEFROST TO FRONT VENTS


you have a vacuum leak. Check the vacuum reservoir for a leak.

You can spray short bursts of starting fluid on the vacuum lines to find a leak. When engine revs, that's the leak. Be careful.

Vacuum Reservoir Tank and Bracket Removal
  1. NOTE: The A/C vacuum reservoir tank and bracket (19A566) is located either on or beneath the RH front fender splash shield (16102) .
    If the A/C vacuum reservoir tank and bracket is visible from above in the engine compartment, perform Steps 2 through 4. If the A/C vacuum reservoir tank and bracket is not visible in the engine compartment, perform Steps 5 through 8.
  1. Remove the screws and the A/C vacuum reservoir tank and bracket. 1b32ebf.gif

Jun 14, 2009 | 1988 Ford Ranger

Not finding what you are looking for?
1999 Ford Expedition Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...