Question about 2003 Chrysler Town & Country

Open Question

Fault in pcm p0957

Fault in 2009 town & country. autostick circuit low

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chryslertech
  • 115 Answers

SOURCE: low speed fan relay for the 2005 chrysler town and country

If you are talking about the cooling fan relay for the radiator there is no low speed and high speed relay. There is only one relay and it is behind the grill revitted to the bumper rail. It is doesnt look like you typical relay.

Posted on Mar 08, 2009

  • 85 Answers

SOURCE: 2005 town & country reading light

I have the same vehicle. when the sun comes up I will go out and look my self and get back. It should let me post a follow up.

Posted on Jun 17, 2009

  • 2 Answers

SOURCE: I need to recharge my air condition on 2006 town & country van

In front of the engine, about a foot down from the top and beside the alternator (Passenger side). The port nearest the hood hinge on passenger side and enar hte back ot he engine is the high side. Its a bit larger in dimension than the low side.

Posted on Jul 05, 2009

  • 1986 Answers

SOURCE: how to replace our low beam headlight on 1999 town and country

1.) Open the hood of your van 2.) On the passenger side of the vehicle, look behind the headlight enclosure. You will see a set of wires running into the back of it. This is the power clip. Either with your hand or a flat-head screwdriver, pop the power clip off.
3.) There is a plastic ring encasing the light bulb. Turn the ring counter-clockwise and pull it out of the socket and set it aside.
4.) Pull firmly on the light bulb to remove it.
5.) Place the new light bulb into the same opening. Be careful not to touch the glass part of the new bulb. The oils in your skin can substantially reduce the life of the new bulb.
6.) Replace the plastic ring and turn it clockwise to lock it in place.
7.) Reattach the power clip to the back of the bulb.

Posted on Oct 29, 2009

  • 149 Answers

SOURCE: 2008 Chrysler Town & Country

Nope no recall on brakes

Posted on Jan 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

No current to cooling fan in a 1998 lincoln town car


-it will supply power there when temperature is reach a certain degree.


Mai

Apr 09, 2013 | 1998 Lincoln Town Car

1 Answer

Code P 0403 on 2002 Chrysler Town and Country mean?


OBD Code P0403refers to
The Exhaust Gas Recirculation (EGR) system is controlled by a vacuum solenoid. The solenoid is supplied ignition voltage. The Powertrain Control Module (PCM) controls the vacuum solenoid by grounding the control circuit(ground) or driver. The primary function of the driver is to supply ground for the object that is being controlled. Each driver has a fault circuit that the PCM monitors. When the PCM turns a component on, the control circuit voltage is low, or close to zero. When the component is turned off, the voltage on the control circuit is high, or near battery voltage. The PCM watches for these conditions, and if it doesn\'t see the proper voltage at the proper time, this code is set.

Possible causes of OBD code P0403
The causes for a P0403 EGR code could be any of the following: Bad EGR solenoid Excessive resistance in control circuit (PCM controlled ground) due to an open, chafing or damage to the harness Poor connection at the EGR solenoid harness (worn or loose pins) Water intrusion at the EGR solenoid harness Blockage in EGR control solenoid holding solenoid open or closed causing excessive resistance Loss of supply voltage to EGR solenoid Bad PCM

Sep 14, 2012 | 2002 Chrysler Town & Country

1 Answer

Code p0443 town & country


code is for fume purge control
To cause a P0443, there has to be a problem with the purge control CIRCUIT, not necessarily the valve. Usually they are a unit housing the valve and the solenoid as an assembly. Or it could be comprised of a separate solenoid with vacuum lines to a purge valve. That said, it could be any of the following:
  • Bad purge solenoid (internal short or open)
  • Wiring harness chafing or rubbing another component causing short or open on control circuit
  • Connector worn, broken or shorted due to water intrusion
  • Driver circuit inside powertrain control module (PCM) is bad

Jun 09, 2012 | 2006 Chrysler Town & Country

2 Answers

1999 Chrysler T&C Limited - Driving lights/Fog Lights


The fuses that protect your headlamp circuits are Fuse Numbers [4] (Left High Beam), [5] (Right High Beam) [6] (Left Low Beam) and [7] (Right Low Beam).
Fuse 4 is a 10 Amp fuse
Fuse 5 is a 10 Amp fuse
Fuse 6 is a 20 Amp fuse
Fuse 7 is a 15 Amp fuse
All are located in the Power Distribution Center in the engine compartment.

The difference between a 1999 Chrysler Town & Country with DRL and WITHOUT DRL is that one has a DRL module and the other does not. The headlmps themselves are wired exactly the same.

To make yours work, you would have to add the DRL module and reprogram your Body Control Module (BCM) to accept the DRL module. Doing it any other way would probably result in the BCM setting fault codes and possibly even causing malfunctions in other non-headlamp-related circuits.

Apr 22, 2012 | 1999 Chrysler Town & Country

1 Answer

Code's 202 and 302


Both fault codes walk together, the first generated the second...

DTC P0202 - Cylinder 2 Injector Circuit Malfunction
P0202 means that the PCM detected a fault in the injector or the wiring to the injector. It monitors the injector and when the injector is activated, the PCM expects to see the voltage pulled "low" or close to zero. When the injector is switched off, the PCM expects to see a voltage that is close to battery voltage or "high". If it doesn't see the expected voltage the PCM will set this code. The PCM also monitors resitance in the circuit. If the resistance is excessively low or high it will set this code.

The symptoms for this code will likely be a misfire and a rough running engine. Poor acceleration. The MIL will also be illuminated.

The causes of a P0202 engine light code could be any of the following:
Bad injector. This is usually the cause of this code but doesn't rule out the possibility of one of the other causes
Open in the wiring to the injector
Short in the wiring to the injector
Bad PCM


DTC P0302 Code - Cylinder #2 Misfire
A P0302 code means that the the car's computer has detected that one of the engine's cylinders is not firing properly. In this case it's cylinder #2.

Symptoms may include:
the engine may be harder to start
the engine may stumble / stumble, and/or hesitate
other symptoms may also be present

A code P0302 may mean that one or more of the following has happened:
Faulty spark plug or wire
Faulty coil (pack)
Faulty oxygen sensor(s)
Faulty fuel injector
Burned exhaust valve
Faulty catalytic converter(s)
Running out of fuel
Poor compression
Defective computer


If need additional details, just contact us clicking the links. Hope this helps.

Oct 13, 2011 | 2002 Chrysler Town & Country

2 Answers

My 02 town n country wont shift out of 1st ,could it be a sensor rather yhan a bad trans


more like the computer or a sensor ,but need the right software to hook it up and see what fault codes are showing

Dec 14, 2009 | 2002 Chrysler Town & Country

1 Answer

Describe your 1996 Chrysler Town &


HAVE SOMEONE EXTRACT THE CODE FROM THE CAR'S COMPUTER. IF THERE IS A CHECK ENGINE LIGHT ON THEN THE PCM HAS A CODE STORED ON IT. IT SOUNDS TO ME LIKE A THROTTLE POSITION SENSOR, BUT JUST CHECK THE CODE TO BE SURE. SOME OF THESE CAN ALSO HAVE A BAD IDLE AIR CONTROL VALVE. I HOPE THIS HELPS YOU TO FIND THE PROBLEM. PLEASE KEEP ME POSTED, THANKS FOR USING FIX-YA. GOOD LUCK

Aug 28, 2009 | 1996 Chrysler Town & Country

1 Answer

Ignition coil keeps busting open


YOU EITHER HAVE A COIL DRIVER CIRCUIT WIRE SHORTED OR FAULTY ENGINE CONTROLLER(PCM)..CHECK NEAR TRANS DIPSTICK FOR ANY DAMAGED/MISROUTED WIRING..HAVE SEEN IGNITION COIL DRIVER CIRCUIT PROBLEMS WITH PCM'S IN THESE VEHICLES ALSO

Jul 04, 2009 | 1998 Chrysler Town & Country

Not finding what you are looking for?
2003 Chrysler Town & Country Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...