Question about Cars & Trucks
Need to get wires back in to roll windows up?
You will need a small pick, you will need to look into the hole that has no connector in it and you will see a small plastic retainer arm, this arm holds the connector in.
once you locate the clip in the unused hole you will see what is looks like ,move to connector you wish to remove and from the top slide pick down, there are tool kits for this type of terminal removal, this pick must be very small to enter solt to pull back on arm while pulling connector out of plug.
Posted on May 09, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
U CAN'T PUT 12VOLTS TO A WIRE IT HAS TO BE APPLIED THROUGH A RELAY CONTACT. THE EASIEST SOLUTION IS TO GET THE SWITCH FROM THE AUTO SALVAGE YARD.
Posted on Aug 05, 2008
needs a window regulator they are going bad like left and right, Chrysler updated the part so you have to replace the glass too
Posted on Apr 22, 2009
Make sure you have voltage going to the switch. Then make sure you have voltage going to the motor in the door. If you have voltage in both place you will need to replace the window lift motor.
Posted on May 18, 2010
Tips for a great answer:
Oct 24, 2013 | 2001 Chevrolet Cavalier
Jun 06, 2012 | 2001 Chevrolet Cavalier
Sep 07, 2011 | 2001 Chevrolet Cavalier
Jul 24, 2010 | 2001 Ford F350 Super Duty SuperCab
Dec 28, 2009 | 2001 Audi allroad
Dec 25, 2009 | 2001 Ford Windstar
Aug 02, 2009 | 2001 Buick LeSabre
Jul 13, 2009 | 2000 Chevrolet Cavalier
Apr 25, 2009 | Hyundai Accent Cars & Trucks
32 people viewed this question
Usually answered in minutes!