Question about 2000 Hyundai Accent

2 Answers

Transmission codes what are codes po707,po722?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Hyundai Master
  • 1,848 Answers

Check in its repair manual.

Mai

Posted on May 08, 2013

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

PO707 pertains to the transmission's P/R/N/D gear selector signal and usually denotes a misadjusted cable or a circuit fault.
The PO722 is a code for the output speed sensor. This code when set will put your transmission in the "limp mode" which is also called "fail safe mode". Your transmission will only work in 3rd gear when this happens, which can lead to sluggish start-up.

Posted on May 08, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need the code PO722 for a 2006 ford freestar 3.9


Hope, code PO722 Output Speed Sensor No Signal.
Possible trigger for code,
  • Defective Output Speed Sensor
  • Defective Shift Solenoids
  • Defective Engine Coolant Temperature Sensor
  • Defective Valve Body
  • Dirty transmission fluid that restricts the hydraulic passages
  • Defective Output Speed Sensor wiring or connector
P0722 Ford Output Speed Sensor No Signal
http://www.autozone.com/repairguides/Ford-Freestar-Monterey-2004-2006/Diagnostic-Trouble-Codes/4-2L-V6-VIN-2-Auto-5/_/P-0996b43f802e829c

Aug 27, 2016 | 2006 Ford Freestar

2 Answers

What are diagnostic codes: c1044 and p0707


C1044-RIGHT REAR TONE WHEEL PERFORMANCE
P0707 - Transmission Range Sensor Circuit Low Input Possible causes
- Faulty Park/neutral position switch
- Misadjusted park/neutral position switch
- Park/neutral position switch harness is open or shorted
- Park/neutral position switch circuit poor electrical connection

Apr 07, 2015 | 2007 Jeep Compass 2.4

1 Answer

How to fix code po722 po715


P0715 HAS TO DO WITH THE VSS, VEHICLE SPEED SENSOR, FIND IT ON THE TRANSMISSION , SE IF IT IS UNPLUG OR A BAD WIRE, YOU CAN ALSO REMOVE THE SENSOR FROM TRANSMISSION CONNECT TO HARNESS AND SPIN IT BY HAND WITH KEY ON SE IF IT WORKS ON THE SPEEDOMETER, P0722 REEFERS TO THE SAME VSS.

Apr 15, 2014 | 1998 Volkswagen Beetle

1 Answer

PO133 oxygen sensor & PO722 emissions codes


You have both oxygen sensor codes
as well as transaxle

Google the codes

OBD2 code PO 722 & read up

I would not be using any vehicle with trans codes
unless you care to spend thousands when it quits

Mar 07, 2013 | 2001 Hyundai Accent

1 Answer

I have a code PO707 for a hyundai accent 2001 and a code PO708


Code 707 is for an open transmission select switch, and code 708 is for the same switch shorted to ground.
I would test the switch and check the connection.

Aug 25, 2012 | 2001 Hyundai Accent

1 Answer

I have a2000 hyundai elantra with a 2.0 L engine trouble code, po707 comes up and I have lost my code book can you tell me what it is it says trans range sensor circuit low input thank you...


It means that either the transmission range sensor needs to be replaced, or that the power to the sensor has been compromised, meaning that you need to find if there is a broken wire running to the switch

Dec 10, 2009 | 2000 Hyundai Elantra

Not finding what you are looking for?
2000 Hyundai Accent Logo

386 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...