Question about 1997 Bentley Turbo

Open Question

How many quarts of oil go into the engine - 1997 Bentley Turbo

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My problem is when driving, the engine rattles bad especially when accelerating, I had noticed my oil level looked empty


Most engines take at least 5 quarts of oil. Have you check the dip stick to see how much is in there?

Mar 16, 2016 | 2007 GMC Envoy

1 Answer

How many qts of oil do i need


Depends on your engine.

1980 JEEP CJ-7 2.5L 4-cyl Engine Code [B]
CAPACITIES
Engine, GM without filter..........2.4 quarts[1]
Wix Filter ........ 51040
Cooling System, Initial Fill..........8.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....25 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 4.2L 6-cyl Engine Code [C]
CAPACITIES
Engine, without filter..........5.0 quarts[1]
Wix Filter..... 51522
Cooling System, Initial Fill..........11.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....30 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 5.0L 8-cyl Engine Code [H]
CAPACITIES

Engine, without filter..........4.0 quarts[1]
Wix Filter..... 51258
Cooling System, Initial Fill..........13.0 quarts
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A904, 30RH..........7.0 quarts
3 speed A999, 32RH..........8.4 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

Oilman

Feb 02, 2013 | 1984 Jeep CJ7

2 Answers

How many quarts of oil for an oil change


Depend on the size of engine.
4 cylinder engine 4 quarts.
6 cylinder engine 5 quarts.

Oct 06, 2010 | 1995 Toyota Camry

1 Answer

How many quarts of motor oil does it take


4.3 ENGINE HOLDS 4.5 QUARTS WITH NEW OIL FILTER 4.8 - 5.3 -6.0 -ENGINES HOLDS 6.0 QUARTS WITH NEW OIL FILTER. 6.6 DIESEL ENGINE HOLDS 10 QUARTS OF OIL WITH NEW OIL FILTER.

Sep 01, 2010 | 2005 Chevrolet Silverado 2500HD 2WD

1 Answer

I changed the oil, how many quarts should i put back in. i have a 92 sl1 i believe. 4 door, sohc


With a filter change along with the changing of oil. I would start with four quarts, than start the engine let it run for a second. After that turn it of check the oil, and top off as necessary. Roughly guessing I would say it holds about 4 1/4 quarts. Or could take up to five, its safe to start engine after four quarts. BE SURE to start engine after four quarts for 10-20 seconds, and then turn off to recheck. Too much oil can be catastrophic. (if no oil is showing on the dipstick than it is more than one quart low. The lowest point on dipstick represents one quart low, the middle is half a quart, and full is full) :)

Jul 11, 2010 | 1992 Saturn SL

1 Answer

How many quarts or oil do my 2000 dodge interpid take???


Most engines four cylinder and six cylinder are going to have a five quart oil pan. Put in four and a half quarts start the engine for a couple of minutes and shut it back off. Check the dipstick. Nine times out of ten you will need to put in the remaining one half of the fifth quart. Dodge recommends SAE 5W-30 oil in the 3.3-liter engine and SAE 10W-30 oil in the 3.5-liter engine. Selecting the proper oil for your engine will ensure that the components of your engine are protected.

Jul 08, 2010 | 2000 Dodge Intrepid

2 Answers

How many quarts of oil in 5.0 mustang gt


The 5.0L engine comes with a 5 quart oil pan. I have a 95 mustang and I have a 7 quart oil pan installed on it. If there was a previous owner that has done any work to your car be aware of that. It wasn't until 96 that mustangs came stock with a 6 quart oil pan on the 4.6L engine. I would put 5 quarts in with out worry. start the engine for a bit, shut it back off and check the oil again before taking it out on the road. Do not only put 3 quarts in it and feel safe with it.

Jul 01, 2010 | 1992 Ford Mustang

3 Answers

How much oil do i put in my truck right after i do an oil change auto zone said 3 buckets of oil . but isnt that too much for an ford f250 94-95


The most these trucks take is six and a half U.S. quarts of oil.The safest way to know for sure is to drain all the oil out, remove and install a new oil filter, then install five quarts of your preferred oil.Start the vehicle up and let it run for thirty seconds, then turn it off.Pull the dipstick out and check the level with the engine not running, then top off the oil as necessary.Run it for five minutes to verify that there are no oil leaks, Then Happy Motoring!!! Hope I could help!!!

May 15, 2010 | 1995 Ford F250

1 Answer

2001 Ford windstar engine is loud engine light is


Try to change your oil and add one quart of lucas oil that will quiet your engine and will lubricate your valves too.
5 quarts of regular oil change. Pour 4 quarts of synthetic oil 5W30 and one quart Lucas Oil.

Dec 29, 2009 | 2004 Ford Windstar

5 Answers

I don't know how much oil i need for an oil change


With oil filter you'll need 5 quarts. After changing oil and filter run briefly and check for leaks. Shut down the engine and check oil level is correct.
I hope this may have helped,
Tom

Oct 18, 2009 | 1993 Ford Probe

Not finding what you are looking for?
1997 Bentley Turbo Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bentley Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75842 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

881 Answers

Are you a Bentley Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...