Question about 2007 Ford Bantam 1.3i
Posted by Anonymous on
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Is it an automatic transmission?
Neutral Safety Switch not connected back to the linkage?
Put you foot on the brake switch
Put it to neutral ("N") and start the car
Put it back to PARK to warm up
Is the clutch on safety sensor hook up?
Alarm system relay disconnected?
Oil pressure switch / wire not connected.
NO oil pressure will disable fuel pump.
Posted on Dec 08, 2009
Hi your ford Bantam clutch slave cylinder fix will require the removal of the transmission , this is a concentric unit incorporated in the release bearing assembly and can only be replaced as a complete unit . if you only have a fluid leak at the connection entering the gearbox you might get a kit at your local dealership, this is for the Rocam Motor driven Bantam
Posted on Jun 23, 2014
Tips for a great answer:
Sep 19, 2016 | 2007 Ford Bantam 1.3i
Jul 14, 2016 | 2007 Ford Bantam 1.3i
Jun 02, 2016 | 2007 Ford Bantam 1.3i
Sep 26, 2014 | 2008 Ford Bantam 1.3i
Jun 23, 2014 | 2007 Ford Bantam 1.3i
Aug 28, 2012 | 2006 Ford Bantam 1.6i
Jul 15, 2012 | 2005 Ford Bantam 1.3i
Jul 17, 2017 | 2007 Ford Bantam 1.3i
167 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: