Question about 2000 Mitsubishi Eclipse

Open Question

Bcm location at mitsubishi eclipse 2000 - 2000 Mitsubishi Eclipse

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 8 Answers

SOURCE: 2000 Mitsubishi Eclipse will not idle, all else OK, just repl bat

I can only offer these few ideas.

  1. The TP throttle position sensors for this year group fail often Pin 1 to Pin 4 resistance should be 3.6 to 6.3 ohms but you need to remove the two 7mm bolts that hold this sensor on the front side of the throttle body, then rotate the two bolstered center and see a change in resistance from low to high. If the resistance remains fixed, the sensor is rusted out and must be replaced.
  2. The IAC motor is mounted on th LH side (driver's) of the throttle body. It should make a clicking sound when the key is turned from Lock to Run. Pin 2 to Pin 1, Pin 2 to Pin 3, Pin 5 to Pin 4, and finally Pin 5 to Pin 6 must all have continuity at 38 to 52 ohms.
  3. Check for any vacuum leaks.
  4. Remove clean and check EGR.
  5. If this is a Cranks but will not start problem, check the owners manual for Theft Deterant UNLOCK proceedure. If there is power at the rear fuel pump relay coil and no power at the MFI/ASD front relay coil and no spark, then its the security system.

Posted on Jun 28, 2009

Ad
  • 35 Answers

SOURCE: brake light bulb Mitsubishi Eclipse Cars

look for access panels in rear hatch there will be one on each side remove those and there will be 10 ml nuts holding the light housings on remove those then you can access the lights

Posted on Jul 02, 2009

bschilz
  • 2049 Answers

SOURCE: Location of thermostat 2003 Mitsubetsi Eclipse 4

The thermostat is found at the end of the top radiator hose . Find the top radiator hose and follow it to the engine .There you will find a thermostat housing with the end of the hose attached . There will be 2 bolts holding down the housing to the engine. Undo the bolts and pull the housing off and the thermostat will be there.

Posted on Sep 06, 2009

  • 192 Answers

SOURCE: WHERE IS THE FUEL PUMP RELAY LOCATED ON THE 2000

the relay is located on the left upper engine compartment. it is the first relay to the right of the fenderwell.

Posted on Oct 13, 2009

GARYca
  • 672 Answers

SOURCE: Change a crankshaft position sensor on a 2000 eclipse

Is this a V6 or 4cyl???>>>(V6) This requires removing the Harmonic balancer (crankshaft pulley). Remove (R) front wheel, remove engine splash Guard, Remove crank pulley, remove lower timing belt cover. The Crank sensor is located behind the crank shaft pulley!! I highly recommend having this done by a certified tech, requires special tools. Hopefully this helps!!

Posted on Mar 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where isa the crank shaft position sensor located on a 2000 V6 Eclipse?


0996b43f8020334f.jpgAuston, I couldn't load both at the same time go to auto zone sign is (it free) and look it up

Sep 10, 2014 | 2000 Mitsubishi Eclipse

1 Answer

Power Steering Pump


see the diagram attached. God bless you
f325f573-3b61-4a08-907a-eb627205abcc.png

Jul 23, 2013 | 2000 Mitsubishi Eclipse

1 Answer

2000 Mitsubishi eclipse gt


see the diagram attached. God bless you
3163d4ca-779e-46fc-8616-1eb120b57e7d.jpg

Jul 22, 2013 | Mitsubishi Cars & Trucks

2 Answers

Picture diagram for 2000 eclipse spark plug to distributer


According with engine sizes, check this for 2000 Mitsubishi Eclipse GT 3.0 liter SOHC V-6

zjlimited_399.gif



or 2000 Mitsubishi Eclipse GS 2.4 liter SOHC L4

zjlimited_400.gif

Hope helps.

Apr 29, 2011 | 2000 Mitsubishi Eclipse

1 Answer

Change a crankshaft position sensor on a 2000 eclipse


Is this a V6 or 4cyl???>>>(V6) This requires removing the Harmonic balancer (crankshaft pulley). Remove (R) front wheel, remove engine splash Guard, Remove crank pulley, remove lower timing belt cover. The Crank sensor is located behind the crank shaft pulley!! I highly recommend having this done by a certified tech, requires special tools. Hopefully this helps!!

Mar 11, 2010 | 2000 Mitsubishi Eclipse

1 Answer

Where is the thermostat located on a 2000 Mitsubishi eclipse V6,


on the top of the block where the top radiator hose runs to its held down by two bolts

Dec 05, 2009 | 2000 Mitsubishi Eclipse

1 Answer

WHERE IS THE FUEL PUMP RELAY LOCATED ON THE 2000 MITSUBISHI ECLIPSE GT


the relay is located on the left upper engine compartment. it is the first relay to the right of the fenderwell.

Oct 13, 2009 | 2000 Mitsubishi Eclipse

1 Answer

I need to find where the ecm is located on my 2000


some are mounted behind the right kick panel on passenger side, some are also mounted under the hood on one of the fender wells

Aug 29, 2009 | 2000 Mitsubishi Eclipse

Not finding what you are looking for?
2000 Mitsubishi Eclipse Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8547 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...