Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
This one is simple
1. Remove dip stick and filler cap.
2. Remove oil plug from oil pan and drain oil into an appropriate pan.
3. Remove and replace oil filter. (Filter will drain oil, just be aware to try and get it into the pan.
4. Refill oil. Start with 3.5 quarts, put cap and dip stick back on and start car, wait about 10 seconds and then turn off.
5. Check your dipstick for proper oil level.
And thats it you are done.
Posted on Jan 20, 2009
Hi the code P0139 is Bank 1 sensor 2 lambda sensor fault ,possible wiring or sensor fault even if you replace the sensor you need to have the MIL lamp turned off by a Diagnostic machine,it is possible you have another fault such as poor Catalytic converter efficency giving the same fault code ,Would recomend you get the car checked and read the "live" data as the car see`s it to make an accurate diagnosis and cure
Posted on Jul 10, 2009
If you purchase a new battery at an autoparts store, like autozone or advance, they will install the new battery for you. Hope this helped and best wishes.
Posted on Jul 31, 2009
Did you use a aftermarket O2 sensor or a genuine Hyundai one? If it's an aftermarket one it may be bad or not as good as the OEM one. See here for more details and other potential causes: P0133
Posted on Feb 11, 2010
P2626 O2 Sensor Pumping Current Trim Circuit/Open (Bank 1 Sensor 1)
I'll sure this has to do with a faulty O2 sensor. This sensor is usually located around the header of your car, or down more on your exhaust.
Try disconnecting your battery for 30 mins, hook it back up, and start your car again. This will erase the error. See if it comes in again.
Hope this help (remember rated this post).
Posted on Mar 25, 2010
Tips for a great answer:
Apr 14, 2017 | 2005 Hyundai Elantra
Mar 12, 2017 | 2005 Hyundai Elantra
Oct 02, 2014 | 2005 Hyundai Elantra
Jul 04, 2010 | 2005 Hyundai Elantra
Mar 25, 2010 | 2005 Hyundai Elantra
Jul 31, 2009 | 2005 Hyundai Elantra
Jul 22, 2009 | 2005 Hyundai Elantra
21 people viewed this question
Usually answered in minutes!