Question about Cars & Trucks

Open Question

What is valve cover bolt torque, 2000 taurus, 3.0, dohc

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Loringh
  • 185 Answers

SOURCE: my 96 sl 1.9 dohc valve cover gacket

The only thing would do for the stripped bolts is to retap them with a tap & die set using the next larger size. As for the one that's broken off you can use what's called an "Easyout". You drill a hole into the broken off part of the bolt and then insert the Easyout. The Easyout has left hand threads and as you turn it , it bites into the broken bolt and usually will take it right out.

Hope this helps.

Good luck Loringh

Posted on Oct 17, 2008

  • 271 Answers

SOURCE: Valve cover and Oil pan bolt torque

Inside to outside for torque pattern, 7 foot lbs. or 144 inch lbs.

Posted on Oct 24, 2008

dcraig1000
  • 16 Answers

SOURCE: valve cover torque

17 ft lbs

Posted on Jan 23, 2009

  • 46 Answers

SOURCE: 2000 VW jetta; what is the torque for valve cover and plenum

I briefly looked online and did not see any info direct6ly relating to the torque spec of the cover bolts. I would guess around 15 ft lbs.--not too much--the head is aluminium--best way to go is to walk up to the service counter of the VW dealer and ask him to provide that information. You have the car and they built it!

Posted on Apr 09, 2009

  • 36 Answers

SOURCE: Torque for tightening Valve cover bolts on Kia Sportage 95

The gasket has metal torque limiters.use your own judgement just dont break the bolts

Posted on Jul 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the torque specs for the 5 bolts that secure the Transmission Manual Valve Position Pressure Switch


Torque specs on on 4L60 tranny pan in 04 escalade??

www.cadillacforums.com/.../cadillac-escalade.../260881-torque-specs-4l6...
May 26, 2012 - 3 posts - ‎3 authors Has 104000 miles on it now, figured it's time to change the filter and the fluid. ...Cadillac Escalade, EXT and ESV Forum - 1999 - 2006 Discussion, ... Flywheel toTorque Converter Bolt ... Transmission Fluid Pressure Manual Valve Position Switch to Valve Body Bolt ... Powered by vBulletin® Version 4.1.5 Re: SRX V8 Valve Cover Gasket Replacement Write Up ...
14 posts
Jun 10, 2015
2000 DTS Setting up Internal Mode Switch - 4T80E ...
9 posts
Aug 27, 2014
More results from www.cadillacforums.com

Nov 19, 2015 | 2000 Cadillac Escalade

1 Answer

Need head bolt torque specs for a 1996 saturn sl


Quote:





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.





Originally Posted by norvelplagbao52

1993 saturn sl2 1.9 dohc cylinder head torque
specs and sequence
Cylinder head bolt
tightening procedure:
CYLINDER HEAD BOLT TIGHTENING SEQUENCE:

INTAKE
SIDE
8 4 1 5 9

7 3 2 6 10
EXHAUST SIDE

In sequence,
torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs).
In sequence,
torque all bolts. Torque: 50 Nm (37 ft-lbs)
In sequence, turn each bolt an
additional 90 degrees.

Sep 19, 2013 | 1996 Saturn SL

1 Answer

What is the torque specs for 2002 Sonata 2.4 dohc valve cover bolts?


Valve cover bolts are in most cases reusable unless rounded off or striped. If the bolts are m6 89in/lbs should be good m8 105 in/lbs.

Feb 18, 2013 | Hyundai Motor 2004 Sonata

1 Answer

Plugs getting wet with oil


Don't know what type motor you've got, but this same thing happened with a DOHC Saturn engine. In the inside of the valve cover there's an O ring in each spark plug hole, they need to be replaced. If this is the problem, you'll want to replace the valve cover gasket as well. Since you'll already have the valve cover off. Also when replacing the valve cover, be sure to tighten the valve cover bolts in the proper sequence and proper torque.

Feb 17, 2013 | Cars & Trucks

1 Answer

Cylinder head bolt tightening sequence for isuzu rodeo 1998


1998 Isuzu Truck Rodeo 2WD 2.2L MFI DOHC 4cyl

The Head Bolt Torque

Torque sequence ----------------- front ' 7 3 1 5 9 ' of ' ' engine ' 8 4 2 6 10 ' ----------------- Step 1: torque bolts in sequence to 18 Ft/Lbs Step 2: turn bolts in sequence an additional 90-degrees Step 3: turn bolts in sequence an additional 90-degrees Step 4: turn bolts in sequence an additional 90-degrees recheck final torque in sequence

1998 Isuzu Truck Rodeo 2WD 3.2L MFI DOHC 6cyl

The Head Bolt Torque

Torque sequence -------------- front ' 6 1 3 7 ' of ' ' engine ' 5 2 4 8 ' -------------- Step 1: torque to 20 Ft/Lbs Step 2: torque to 47 Ft/Lbs recheck final torque in sequence

Jan 15, 2013 | 1990 Isuzu Spacecab

2 Answers

I cant get off the timing belt cover on a daewoo leganza dohc 2000 do i have to take the pully off. the metal peace behind the motor mount is preventing from coming off


thats correct the engine mount bracket needs to come off also if you need to remove rear timming belt cover to replace say the water pump or do some other repair, 3 torque head bolts are very tight and loctited in usually use correct torque socket and breaker bar to crack, its a bit of a tight squease also.

Aug 25, 2011 | 2000 Daewoo Leganza

2 Answers

Torque specs.for head on a 2000 1.9 saturn


there are 2 different 1.9 engines, so for future ref, you need the 8th digit of the VIN number. use NEW bolts. torque to 22 ft lbs. then turn 90 degrees, then another 90 degrees.

Aug 04, 2011 | Saturn SC2 Cars & Trucks

1 Answer

How to replace valve cover gaskets on a 2000 mazda millenia w/ 2.3 DOHC Supercharger?


just look at the valve covers some are held in place with 6 bolts some only 3 do one at a time and keep working area clean and free of dirt n grease. clean valve cover good and have clean hands when handling gasket, and there your done just replace and bolt down , check bolts again for tightness in a couple weeks.

Apr 25, 2010 | 2000 Mazda Millenia

1 Answer

How do i repair left front hub & bearing assembly on a 2000 ford taurus v6 24v dohc


BEST TO GET A HAYNES REPAIR MANUAL IT HAS PHOTOS AND INSTRUCTIONS ON HOW TO REMOVE HUB BEARING ASSEMBLY.YOU WILL NEED A 1/2 SIZE TORQUE WRENCH FOR HUB RETAINING NUT.ITS TORQUE IS 170 - 202 FT LBS.MAKE SURE YOUR TORQUE WRENCH MAXIMUM RANGE IS AT LEAST OVER 200 FT LBS TORQUE.YOU WILL ALSO NEED A AXLE NUT SOCKET.ITS A BLACK SOCKET LIKE IMPACT SOCKET.ITS GRADE 8 STEEL.YOU HAVE TO USE THIS TYPE.A REGULAR SOCKET WILL BREAK.WHEN REMOVING AXLE NUT.ITS ON TIGHT.YOU WILL ALSO NEED A 1/2 BREAK BAR TO BREAK IT A LOOSE.ALSO REMOVE WHEEL COVER.WITH CAR WEIGHT ON WHEEL YOU HAVE TO LOOSEN AXLE NUT A LITTLE.NOT ALL THE WAY UNTIL YOU GET CAR OFF GROUND.WORK SAFE BECAREFUL.

Oct 28, 2009 | 2000 Ford Taurus

3 Answers

How to locate thermostat on a 2000 taurus se 3.0l duratec dohc


on ataurs with a duratec the thermostat is on the bottom radhose underneath the car. you will see a little housing near the radiator underneath the vehicle. they are a bit of a pain to get at

Jan 16, 2009 | 2000 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...