Question about Cars & Trucks

Open Question

Where is the alternator fuse for a 1998 mercury mystique located

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 94 Answers

SOURCE: How do I remove and replace front wheel bearing on

you need to take the tie rod off , the lower ball joint off , take the strut bolt out and remove the nut and washer off the cv axel then pull the whole hub Assembly off then the new bearing need to be pressed in , then reinstall everything not as hard as it sounds

Posted on Mar 09, 2009

  • 1 Answer

SOURCE: mercury mystique starter location

its a 6 I beleive its a 2.5

Posted on Mar 24, 2009

  • 126 Answers

SOURCE: 1998 mercury mystique...where is thermostat

parts store has a manual for you for about $20 that answers both those questions

Posted on Oct 10, 2009

  • 1206 Answers

SOURCE: Speed sensor location...lost?!?!

the second if one will be on the engine most likely place will be down by the crank pulley.

Posted on Jan 07, 2010

ZJLimited
  • 17970 Answers

SOURCE: What is the procedure for removal of the radiator

Ford Contour/Mystique/Cougar 1995-1999 Repair Guide

Radiator -REMOVAL & INSTALLATION
(see Figures 1 through 7)

7249321.jpg
Fig. 1: Remove the upper radiator hose from the radiator


d2d2436.jpg
Fig. 2: Use a back-up wrench to remove the transaxle cooler line connections-automatic transaxle only


3213ac8.jpg
Fig. 3: the lower transaxle cooler line connection


ec9272d.jpg
Fig. 4: Remove the passenger side radiator mount and ...


956cd3d.jpg
Fig. 5: ... and the driver's side radiator mount


f06fec0.jpg
Fig. 6: The condenser can be support using mechanic's wire as shown here, or another suitable device


242d821.jpg
Fig. 7: Carefully lower the radiator out the bottom of the vehicle

  1. Disconnect the negative battery cable.
  2. Drain and recycle the engine coolant.
  3. Remove the upper radiator hose from the radiator.
  4. On 2.5L equipped vehicles, remove the radiator overflow hose from the radiator.
  5. On vehicles equipped with an automatic transaxle only, remove the transmission cooler line from the cooler inlet fitting and plug the line and the fitting.
  6. Remove the engine fan.
  7. Raise and support the vehicle.
  8. Remove the lower radiator hose from the radiator.
  9. On vehicles equipped with an automatic transaxle only, remove the transmission cooler line from the cooler outlet fitting and plug the line and the fitting.
Remove the cooler lines while holding the radiator connector with a back-up wrench.
  1. Support the radiator, and A/C condenser with a jackstand or other suitable device.
  2. Remove the lower radiator supports from the front of the subframe.
  3. Remove the two retaining bolts for the A/C condenser from the brackets at the bottom of the radiator.
  4. Position the jackstand aside and remove the radiator out the bottom of the vehicle.
To install:
  1. Carefully raise the radiator into place and support the radiator with a jackstand or other suitable device. Install the two retaining bolts for the A/C condenser into the brackets at the bottom of the radiator.
  2. Install the lower radiator supports and tighten the bolts to 71-97 inch lbs. (8-11 Nm).
  3. Remove the jackstand and install the transmission cooler outlet line (if equipped) and the lower radiator hose to the radiator.
  4. Lower the vehicle.
  5. Install and tighten the fan shroud nuts.
  6. Install the transmission cooler inlet line (if equipped) and the upper radiator hose to the radiator.
  7. On 2.5L equipped vehicles, install the radiator overflow hose from the radiator.
  8. Connect the negative battery cable.
  9. Fill the cooling system with the proper 50 / 50 mixture and start the vehicle.
  10. Bleed the cooling system and check for leaks.

Hope helps with this (remember rated this help) Good luck.

Posted on Jan 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1998 mercury mystique LS, V6 alternator problem


It is possible the replacement alternator is defective.

Jan 13, 2014 | 1998 Mercury Mystique

2 Answers

Location oa a speed sensor to a 1998 mercury mystique


The speed sensor for the transaxle should be mounted on the side with a wiring harness attached.

Aug 07, 2012 | 1998 Mercury Mystique

1 Answer

1998 mercury mystique LS battery light on , battery only 1 yr. old. ? Is it my alternator ?


If all the connections are clean and tight at the battery it is likely. The alternator should put out about 14.2 volts when the engine is at a fast idle (about 1500 RPMs). Auto parts stores will test your alternator for free.

Mar 13, 2011 | 1998 Mercury Mystique

1 Answer

Battery is drained by an internal short even with the key turned off on a 98 Mercury Mystique. No fuses are blown. With the battery fully charged it takes about 30 hours to drain the battery. Can a small...


Yes, it is very possible that a small internal short in the starter or alternator can cause this. Sometimes the starter wires can lightly touch and cause it to lose a charge. There are a number of things that can short and cause a battery to die over an extended period time. You should probably consult a specialist because it can be difficult to track down.

Jul 10, 2010 | 1998 Mercury Mystique

1 Answer

Location of alternator belt


On the right side of the car

Apr 15, 2010 | 1998 Mercury Mystique

1 Answer

Need car fuse diagram for 1998 mercury mystique


it's on 41 pages in EVTM manaul. what do you need? check your owner manual for charts.
you hav fuses & relays under the hood and a fuse panel in the car too.

Jun 28, 2009 | 1998 Mercury Mystique

1 Answer

Fuse box


The instrument panel fuse panel is underneath the instrument panel on the left side. To open it, reach under the instrument panel and push the release button to the right of the fuse panel.

Mar 25, 2009 | 1998 Mercury Mystique

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...