Question about Honda Cars & Trucks
Code B134 with 15% oil change light
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
P1361 TDC Sensor Intermittent Interruption (I got this from Engine-Light-Help.com)
TDC should mean Top Dead Center.
It is the sensor that tells the computer the #1 cylinder piston is at the very top. And therefore, fires the spark plug.
Since the maintenance done above, I believe the the timing marks for the timing belt is not lined up properly. Being off by one tooth will cause this problem.
Posted on Mar 21, 2009
Hey I had the same code and I have a 2000 honda civic lx. My cousin
works at honda and drives a '96 honda civic and he has had that code
before on his car as well.
First thing he came up with was that the catalytic converter was cracked. We checked mines, and lo and behold, that's what it was.
Look under your hood, and there should be a catalytic converter with a sensor sticking out of it. It is connected to the exhaust manifold and the sensor sticks out of the heat shield. Around the sensor, look for a crack. If there's a crack, that's your problem.
Posted on May 03, 2009
SOURCE: reset maintenance light
If I remember correctly, on the dash you have a select button. Hold the button down then turn the key on, until the maintenance light blinks and goes out. Turn the key off then back on and your light should be out.
Posted on May 28, 2009
SOURCE: oil filter in civic 97
If you go to a reputable motor factor,
you can only be sold the correct filter for the civic.
As there are soo many variables in engine type, it's almost impossible to tell, oil volume, or which type filter.
However, I will say, be sure that you don't mix semi-synthetic oil, and mineral oil.
Oil changes should be undertaken every 30,000 miles, (unless under extra work load, (in which case, slightly more regularly))
Otherwise, 10/40 or 15/40 grade oil, is perfectly fine.
The trick to not overfilling the oil, is simply just to take your time, clean the dip stick and retry, until you have the correct reading.
Please don't forget to rate:)
Posted on Jul 29, 2009
Tips for a great answer:
Sep 12, 2015 | Honda Cars & Trucks
Jan 08, 2011 | 2006 Honda Civic Hybrid
Nov 17, 2010 | 2005 Honda Civic
Sep 12, 2010 | 1997 Honda Civic
Mar 15, 2010 | 1997 Honda Civic
Feb 23, 2010 | 2000 Honda Civic
Sep 29, 2009 | 2002 Honda Civic
Sep 25, 2009 | 1998 Honda Accord
Jul 29, 2009 | 1997 Honda Civic
539 people viewed this question
Usually answered in minutes!