Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Misfire 2 Cyl generated DTC P0302 Code - Cylinder #2 Misfire
A P0302 code means that the the car's computer has detected that one of the engine's cylinders is not firing properly. In this case it's cylinder #2.
Symptoms may include:
* the engine may be harder to start
* the engine may stumble / stumble, and/or hesitate
* other symptoms may also be present
Causes: A code P0302 may mean that one or more of the following has happened:
* Faulty spark plug or wire
* Faulty coil (pack)
* Faulty oxygen sensor(s)
* Faulty fuel injector
* Burned exhaust valve
* Faulty catalytic converter(s)
* Running out of fuel
* Poor compression
* Defective computer
Possible Solutions: If there are no symptoms, the simplest thing to do is to reset the code and see if it comes back.
If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors.
Hope helps (remember rated this).
Posted on Jul 19, 2010
Possible that the memory was reset and so the ECM is also reset. You need to check this out with the Merc dealership so as to reset the ECM without further damage.
Posted on Jun 27, 2012
Tips for a great answer:
Jun 13, 2016 | 2013 Mercedes-Benz C-Class
Oct 24, 2014 | Mitsubishi Pajero Cars & Trucks
Dec 30, 2013 | Cars & Trucks
Nov 17, 2012 | 1992 Nissan 300ZX
Jun 27, 2012 | Mercedes-Benz Cars & Trucks
Dec 14, 2010 | 2006 Mercedes-Benz B-Class
Oct 31, 2010 | Mercedes-Benz 300-Class Cars & Trucks
Dec 10, 2009 | 2006 Renault 181
178 people viewed this question
Usually answered in minutes!