Question about Cars & Trucks

Open Question

Quick fix on a slipping clutch in a ford f-150 1994

I wanna quick fix on a slipping clutch in a ford f-150 1994 pick up 5 speed 5.0

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
fastboyz
  • 674 Answers

SOURCE: Clutch slipping on 5 speed

your clutch is a hydrolic style and adjust its self
im sorry to say your clutch is probily out again.
whas the fly whell resurfaced and a new pressure plate installed

Posted on Nov 04, 2008

Ad
drsinister69
  • 2317 Answers

SOURCE: 93 escort clutch slips.

Around $400-$600.

Posted on May 29, 2010

  • 2841 Answers

SOURCE: I have a 1988 4X4 pick up 4 cylinder. When i start

I would suspect the pressure plate and clutch need replacing. Your truck is 22 years old and if it has never had the clutch replaced you can almost bet it needs a new clutch and pressure plate. It slips in 4th & 5th gear due to the fact the the ratio is high and it takes more pressure to hold the clutch in place.

Posted on Aug 16, 2010

alicantecoli
  • 22156 Answers

SOURCE: clutch replacement procedures for 2000 hyundai

both sides front drive shaft removal ,usual cables and whatever disconnected then pull box out ,not difficult but heavy dirty work

Posted on Jan 04, 2011

  • 3 Answers

SOURCE: I have a 05 Kia Spectra 5 speed manual

What mileage? where does the pedal "take up". You have given no really useful information to assist.On experience I will say this. The clutch may be worn or spirngs weakened through your poor driving techniques... or it could simply have engine oil on it from a faulty rear main seal...whatever it is you should have the box out and the items inspected yes for analysis..but replace the oil seal, machine flywheel (sanding is NOT good enough and instal a new clutch kit. .

Clutches slip at every clutch change..but that is limited.... a slippng clutch during driving should always have the flywwheel machined and the work done as stated above. Cheers Tony.

Posted on Jan 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 Ford Explorer 5 speed driving it without the clutch slave without the clutch and without the 5 speed gear shifter how to get into 3rd gear


the process involves plenty of hydraulic fluid as well as gears and clutches.
If you have an automatic transmission, and it "slips" while you are driving it-that is, the car engine revs without the power going to the wheels-the most common cause (though not the only possible cause) is low transmission fluid. If the slipping is caused by low fluid, it will get worse as the transmission gets hotter.

Apr 04, 2016 | Ford Cars & Trucks

1 Answer

My 1995 ford f150 4x4 transmission slipin 1st 2nd a lil but really slips an ant pulling in 3rd it a 4 speed


check that the clutch master cylinder is operating correctly as the clutch is slipping
this may be from the compensating pot being blocked and holding the pressure plate off slightly
if it is a cable clutch then replace the cable
if the clutch system is properly releasing and engaging the clutch then the fix is a new clutch kit

Sep 23, 2015 | Ford Cars & Trucks

1 Answer

My 1991 ford f250 5 litre 5-speed 4x4 has a problem with the clutch slipping all of a sudden ,after lending to a driver with heavy clutch use habits,can i adjust clutch to get more grip back?


Check to see if you have a rear main seal leak (oil leak) best thing is not to lend it to that driver again unless they pay for it to be fixed

Oct 19, 2014 | Ford F-150 Cars & Trucks

1 Answer

5 speed manuel rpm goes up but dont wanna go


I understand that your engine accelerates fine to high RPM's but your car won't move. Since it is a manual transmission car, the problem may be in a slipping clutch. Probably your clutch is worn and slips.
You might need to replace your clutch.

Nov 13, 2013 | 1991 Honda Accord

1 Answer

1994 ford ranger 5 speed clutch pedal started acting almost loose in 5th on interstate and the gear all the sudden isnt catching and its reving the engine when gas is pressed so i dont wanna blow the


If it has the hydraulic clutch master cylinder,check the fluid level. Smoke could be from leaking line or blown slave cylinder.
Get under there and see what is leaking.
don-ohio

Mar 27, 2017 | Ford Ranger Cars & Trucks

1 Answer

I have a 1988 4X4 pick up 4 cylinder. When i start to pull a hill the rpms go up and you can hear the engine revving up but the truch won't pick up speed. I thought the clutch might be slipping but I can...


I would suspect the pressure plate and clutch need replacing. Your truck is 22 years old and if it has never had the clutch replaced you can almost bet it needs a new clutch and pressure plate. It slips in 4th & 5th gear due to the fact the the ratio is high and it takes more pressure to hold the clutch in place.

Aug 16, 2010 | 1988 Toyota Pickup

1 Answer

When i drive and step on the gas it redlines and takes awhile to gain speed if i go slow on the gas it picks up slowly but everytime i punch it it shoots up in rpms


If it is a 5 speed your clutch is slipping. If it is an automatic the clutch pack is bad or torque converter problem.

Jan 05, 2010 | 2004 Volkswagen GTI

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...