Question about Mitsubishi Passenger

Open Question

Tps wiring diagram on delica - Passenger Mitsubishi Cars & Trucks

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 30 Answers

SOURCE: where could i find an

your is best bet is to purchase a service manual from your local mitsubishi or automotive store and then you will gave a complete reference for your vechicle.

Posted on Sep 05, 2008

Ad
  • 551 Answers

SOURCE: need tps wire diagram for a 1996 galant 2.4

you find it search by writen diagram of ................

Posted on Mar 26, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi I have a 94 mitsubishi delica.The o/d button doesn't work. I was told this is a regulation that o/d is always on.My o/d only works if I pull the fuse.That itself causes problems.Any ideas please.


TCC solenoid could bad or the button could be bad, or the ECM could be bad, along with wiring. when you pull the fuse the transmission shifts with pressure. Hard shifts at higher RPM's. Needs to be scanned( which does't do to much) and checked with a volt/ohm meter. Since it still goes to OD, Your transmission is still working. You have an electrical issue.

Aug 28, 2015 | Mitsubishi Cars & Trucks

1 Answer

Need some wiring diagrams of Fuel pump controlled electronically on a 4M40 DELICA engine. Or some manual for this type of engine.


Most of these Japanese cars use a DENSO fuel pump. The fuel pump is attached to the primary circuit... the same one that starts your car mate. The wiring on these things seldom goes sour. It could be your fuel pump relay or the fuel pump itself. Sorry I can't assist further... Go PIES!

Mar 21, 2015 | Cars & Trucks

1 Answer

My 2003 Ford Focus would not accelerate, and kept dying on me, now wont start, do you know what could be wrong?


A strong possibility of a defective Throttle Positioning Sensor (TPS)...It can be tested with a volt meter...TPS is located on the throttle body (see diagram below) & has a three pin connector with following wire colors; Brown (ground)...Yellow (+5 volts)...And White (TPS output)...Set meter to 5 volt dc...Push point,of safety pins into the Yellow and Brown wire at rear of connector...Do not disconnect connector...connect + lead to Yellow pin and - lead to Brown pin...Turn key on...Meter must read at least .08 volts...Open throttle full...Meter must read at least 4 volts...If not TPS is defective...Send results...NOTE>>>Diagram is based on a 2.0L Single Overhead Cam Engine, if your vehicle is different let me know...saailer




c39c38e9-1e2b-4d1e-b695-576183306462.jpgCost about $30

Jun 25, 2014 | 2003 Ford Focus

1 Answer

Color wiring diagram


with the 5.4 engine
violet/white--- tps reference
gray/white ------ tps 1 signal
orange/lt. blue -- tps signal return
gray/red ----- signal return
red/white ---- reference voltage

with a 6.0 diesel

tan--------ref. volts
yel/white- apps 1 signal
blk/org---- signal ret.
white/red- apps 3 signal
gray/blk--- apps 2 return
white------- apps 2 signal
blk/white-- aps2

hope this helps

Mar 26, 2014 | 2006 Ford F-250 Super Duty

1 Answer

Unknown wiring between the TPS and somewhere behind the TBI and MAP sensor.


have you tryed it a diffrent way then the one they have told you ?

Feb 08, 2014 | 1994 Geo Tracker

1 Answer

Need tps wire diagram for a 1996 galant 2.4


you find it search by writen diagram of ................

Mar 26, 2013 | Cars & Trucks

1 Answer

Accelerator position sensor 2 circuit low voltage


Check wiring connections between ECU and TPS (Throttle Position Sensor). Chances are your TPS has malfunctioned. The ECU (Engine Control Unit) monitors TPS signals at regular intervals. I trust your computer (ECU) to have done it's job... Replace the TPS
Go to www.hmaservice.com and register your vehicle by VIN #..
you'll then have access to wiring diagrams, shop manuals,
service bulletins, illustrations, etc.

Jun 26, 2011 | 2004 Hyundai Santa Fe

1 Answer

Pajero / Delica - How to take apart "female" or


A flathead screwdriver should be able to pry apart the female end of the latch. Sometimes the female end is glued together, or similar. In order to prevent damage to the connector, I would recommend you try using some tweezers or similar to pull the debris out. A bent coat hanger, thick piece of wiring, or similar may work as well.

Feb 24, 2011 | 1990 Mitsubishi Montero

1 Answer

Where could i find an electrical wiring diagram for a mitsubishi delica super exceed?


your is best bet is to purchase a service manual from your local mitsubishi or automotive store and then you will gave a complete reference for your vechicle.

Sep 05, 2008 | Mitsubishi Passenger Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...