Question about Cars & Trucks

1 Answer

How can I jump the starter on my 91 camaro? - Cars & Trucks

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 14,036 Answers

Hot wire starter you can short out ignition switch and wiring. to jump starter ignition switch start have to run 10 gauge jumper wire from the starter solenoid positive battery terminal to starter switch or S terminal on starter solenoid this procedure take two people but better remove starter replace starter solenoid. trying jumping off starter on camaro would be dangerous you have jack up car to get to starter and wiring person laying under car hot wiring starter while other person hold ignition start position put person under car in deadly position just remove starter have auto parts check it out first replace starter or solenoid if either bad. easier hot wire starter if starter under hood like my 1977 vega monza had starter at top could take long screw driver jump starter off.on the four cylinders engines back in the 70s. camaro starter under car dangerous trying to hot wire not a good idea.

Posted on May 07, 2013

  • dan lincoln Apr 17, 2014

    theres a simple tool available, a remote start switch. it clips on. then the technician gets clear, stands beside, makes sure its in park, blocks a wheel, and presses the switch

  • dan lincoln Apr 17, 2014

    oh yeah! he first cleans and tightens the connections, verifies 12.6v is available from the batt and installs the battery ground connection last for electrical safety.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 91 camaro 3.1 and I just changed the starter and recharged the battery but when I turn the key I won't even engage the starter or crank at all

Is ita used starter ,and some time the little wire breaks as the starter goes back in. check the wires on the starter

Oct 28, 2012 | Cars & Trucks

1 Answer

91 camaro wont start.......

sound like a bad starter solenoid located on the top of the starter.

Apr 30, 2012 | 1991 Chevrolet Camaro

1 Answer

My 91 camaro wont crank, all we get is a clicking noise and we tried jumping it to see if battery was the problem, but still just clicking when trying to crank it..please help..

sounds like a bad starter solenoid it is located on top of the starter remove starter take it to a auto parts store and have it tested

Apr 30, 2012 | 1991 Chevrolet Camaro

1 Answer

My camaro 91 automatic doesnt acelrates correctly it make like steps, the idle its not working correct i change iac valve but problem still there the rpm get down and up, a little wath more can i do?

Did you check your timing I have a camaro that jump time and eventually it started to stall at low idle but at first it was just lopy idle up and down. I needed to replace harmonic balance. But check your timing?

May 07, 2011 | 1991 Chevrolet Camaro

3 Answers

My 91 camaro rs 5.0 wont start or click at all. i changed the starter and battery. what can it be?

check the key I have 1992 camaro rs I took it some where and parked it came out and went to start it and it didnt do anything key would turn over no sound no lights nothing. My key had that anti left chip pretty exspensive to replace key needs to entergrated into the comupter. Just a thought.

Oct 20, 2010 | 1991 Chevrolet Camaro

1 Answer

After starting my 91 camaro the starter enguage wheel won"t stay pulled back out of the way. How do I fix this?

Replace the starter you will or have damaged the starter drive and could ruin the teeth on the fly wheel. The spring has gone bad in the solinoid or the shaft thats is activated magnetically is dirty and sticking, ther could be a problem with the starter switch but that is less likely than the solinoid.

Oct 17, 2009 | 1991 Chevrolet Camaro

1 Answer

91 camaro replaced battery wont turn over

did you try turning the engine over by hand??
does the starter sould like it is working>>

Aug 04, 2009 | 1991 Chevrolet Camaro

1 Answer

I have a 91 camaro 3.1 V6 has spark fuel and power to the injector but wont start just wondering what it could be

sometimes it is the ecm which is the computer that goes bad and can no longer sends signals to the starter to turn over. sometimes could be the firing order or timing. check these things out.

Jul 25, 2009 | 1991 Chevrolet Camaro

3 Answers

I have a 91 camaro rs i put a starter in it it wont start. the guy i got it from made a new key at a chevy dealer i think why wont it do anything. ty john

If the key turns, that's all it needs to do. Check, with a test light, to see if you have power to the starter. It could be a dirty loose battery cable, or a faulty cable, or a fuseable link in the positie cable that is gone. It could be the ignition switch itself. Not the key and tumbler, the switch on the steering column. You'll have to do some checking.

Jun 29, 2009 | 1991 Chevrolet Camaro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

303 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

80608 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

15387 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides