Question about Mazda RX-8

Open Question

Back up sensor turn off in reverse - RX-8 Mazda Cars & Trucks

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reversing sensor continually beeps when in reverse


The sensors are sensing the tow bar, either remove it or disable the back up sensors.

Aug 06, 2012 | Mitsubishi Outlander Cars & Trucks

1 Answer

1995 f350 powerstroke wont start one other time had to drop shifter and put back to park before it started now it wont start the lights elect windows and glow plug cycles but no clicking noise just nothing


replace the transmission range sensor. Adjust the new sensor by loosening the bolts slightly, turning the key on, putting the truck in reverse, and turning until reverse light come on.

there are 2 possible sensors, depending on which transmission you have.

jturcotte_2379.gif

jturcotte_2380.gif

Oct 06, 2011 | 1995 Ford F350

2 Answers

The back up sensor signals on my GMC Sierra 1500 has stopped working.how to get to and repair the problem?


Hi,
Problem in the backup/reverse switch.

The problem would be a disconnected/damage reverse switch. Test first if you shift into reverse and the back off light turns on. If not, check the reverse switch on the transmission, connections might be cut off/disconnected.
A good mechanic can check that switch on the transmission, located on the side of the transmission underneath your car.
Hope that helps!

Sep 27, 2011 | Cars & Trucks

1 Answer

In a ford focus 2005 LX - can you turn off the reverse parking sensors - if so how?


follow the wires back from the sensors and you will find that they go into one connector for the reversing lights,just disconnect(or fit an inline switch) to disable........(why?).

Dec 07, 2010 | 2005 Ford Focus

1 Answer

Reverse backing sensor doesn't beep when backing


They have most likely painted over the sensors in the rear bumper or the module has fialed or the sensors are not plugged, one other slim posibility is the siren in the module is faulty.

Mar 16, 2010 | 2005 Ford Five Hundred

1 Answer

Park Assist Doesn't work On 2007 Solara


first try backing up close(6ins) to a wall then put car in reverse(sensors are powered by reverse lights circuit)see if it makes a noise when you press on/off button.if no then make sure you have reverse bulbs working,then check fuses.

Mar 08, 2010 | 2007 Toyota Solara

2 Answers

2003 lincoln navigator reverse sensor no longer working, is this a fuse? the sensor use to work when backing up, now it just stopped working.


This is a very common problem and depending on the code, its very likely a radar sensor. It is located in the bumper cover.

Oct 16, 2009 | 2003 Lincoln Navigator

2 Answers

Front and rear parking sensors


No ford did that so it does not go off when you are driving.

Jul 18, 2009 | Ford Focus Cars & Trucks

1 Answer

Ford backup sensors not working


I would buy a Chilton Repair Manual from a local parts store and a digital ohm meter. If the chilton doesn't have the ohms for all the sensors then research online for the specs on the sensor. It sound like a wiring issue or relay.

Mar 25, 2009 | 2005 Ford F 350 Super Duty

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...