Question about Cars & Trucks
My pugs key stopped working with the anti theft messge. Got spare key and all ok. But over the last 2 months spare key anti theft message but car started ok. now the key is taking alot longer to start the car. One more weird thing my orignal key that broke actually started my 207 last week but now nothing. Tried new key from lock smith who copyed the code over from spare key. this worked twice starting the car but still anti theft message. To start the car with spare key i have to waggle the key and keep messing with it until it satrts but always displays anti theft. is there a conection between key and circuit board in FOB. PLease help me if u can thanks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1994 cadillace anti theft system
I just had this same problem with a '96 . do you have a vats key in your '94? you need to bypass the VATS system. read some of the blogs on this site and it will tell you how to do it. I fixed mine with a $2 resistor from radio shack.
Posted on Oct 12, 2008
no you don't have to have it done at dealership. i bought mine on ebay got it cut at walmart and it works. you need the two originals, turn the ignition to on and then off 4 times (i think it was) with the first two then put your spare key in and do the same. and it will work.
The timing is critical to this procedure, please read through the entire procedure before attempting.
1. Insert one of the pre-programmed transponder keys and turn the ignition to "on", leave on for at least one second (I wait until the red key symbol in the instrument cluster extiinguishes), remove the key from the ignition.
2. Within 5 seconds insert the second pre-programmed key and urn the ignition to "on" for at least one second but no more than 5 seconds (use the key symbol for this as well) then remove the second key.
3. within 10 seconds insert the new key in the ignition and turn the ignition to "on", if you are successful the red key symbol will illuminate then extinguish after about a second.
If you are not successful the red key symbol will flash repeatedly to indicate that you have inserted an invalid key. Remove the key, wait a minute and try it again, it took me a few times to get it perfect and I had done it before.
Posted on Apr 25, 2009
Tips for a great answer:
Oct 29, 2016 | Cars & Trucks
Jul 28, 2016 | Cars & Trucks
Nov 03, 2015 | Isuzu Cars & Trucks
Oct 30, 2012 | Citroen Agusta F4 R312 1 plus 1 Cars &...
Jun 01, 2012 | Cars & Trucks
Oct 17, 2017 | Jeep Cars & Trucks
124 people viewed this question
Usually answered in minutes!