Question about Ford Flex

Open Question

Rear seat wont tumble forward - Flex Ford Cars & Trucks

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: rear seat tumbled forward for

To fix that scenario, I have to get to the bolts anchoring the seat belt which can be found under the rear seat. Which a socket wrench, remove the bolt freeing the seatbelt to allow you room to release the lock to pull the belt out from the top of the back seat. You may now push the back seat into its upright position and then refasten the seatbelts with the bolt to it's former position under the back seat.

When I in later times need to lower the back seat, I will either loop the seatbelt around the head rest or tie two belts together allowing for slack in case the belt tightens again when trying to move the seat back to its original position.

.....Very frustrating!!!

Posted on Feb 20, 2009

Ad
  • 6 Answers

SOURCE: rear passenger seat belt stuck forward. any way

Probably not you can try to get it to pull back in by pulling on it but of course i am sure you have tried this. The belt will need to be replaced. If you would like contact me and i will get you a good deal on the belt and installation instructions if you are wanting to do the repair yourself.

Thanks,

Chris

Posted on Nov 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove back seat of hhr 2006


Rear Seat Replacement

showgif.do?image=1592810

tif.gif

Callout

Component Name
Notice: Refer to Fastener Notice in the Preface section.
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .
Preliminary Procedure Remove the rear compartment floor stowage compartment tray. Refer to Rear Floor Trim Plate Replacement .
1
Nut, Rear Seat (Qty: 6)
Tip
Roll the seat forward enough to get access to the nut that attaches the center seat belt assembly to the floor.
Tighten
45 N?·m (33 lb ft)
2
Bolt, Rear Seat (Qty: 3)
Tip

  1. Adjust the seat forward or rearward to access the bolts.
  2. Remove the plastic trim pieces to gain access to the nuts.
Tighten
45 N?·m (33 lb ft)
3
Rear Seat Assembly

Oct 28, 2015 | Seat Cars & Trucks

1 Answer

Who do I remove rear seat for a BMW 760li?


Most rear seats need to be unlatched from the very bottom on each side. Try sliding the driver and passenger seats fully forward. With your back against the front seat press forward toward the trunk on the bottom of the rear seat on one corner at a time near the floor and lift up. This should release the latch. To replace the seat simply slide the seat back into place with the front slightly raised upward and push the seat in toward the trunk then push down til you hear the latch catch.

Nov 15, 2014 | 2004 BMW 760Li

1 Answer

Rear seats are down wont pop back up


Try moving the front seats forward.

Mar 25, 2014 | 2007 Ford Territory 4.0

1 Answer

I need to know what bolts to remove in order to remove the seats from a cadillac escalade ext


Hello: First remove the plastic covers at the front and rear of the seat tracks (do it carefully so you don't break them) then remove the bolts in the rear (move the seat all the way forward) one on each side. It will either be a 15mm bolt head or a torx head bolt depending on what year truck (don't remember what size torx) after removing rear bolts, move seat all the way forward disconnect ALL electrical connectors, tilt seat forward to disconnect hooks in seat rail and you should beable to remove seat. On some tear models you may have to disconnect the seat belt.

Feb 08, 2011 | Cadillac Escalade EXT Cars & Trucks

3 Answers

How do i take the back off on a 1999 nissan maxima bucket seat


Hi, follow the instruction below......
Rear
See Figures 3, 4, 5 and 6
  1. Remove the lower seat cushion by pulling straight up on the front portion and disengaging the clips. Then hinge the seat upward to release the rear clips.
03b6e0a.jpg

Fig. 3: Pull up on the front of the lower seat cushion and disengage the clips
  1. Remove upper rear seat back-to-chassis bolts.
77eb191.jpg

Fig. 4: Remove the bolts behind the center armrest ...

a796228.jpg

Fig. 5: ... and the bolts on the lower corners ...

fbf100a.jpg

Fig. 6: ... Then pull up on the seat to disengage the three clips on the top of the seat
  1. Remove rear seat back by tilting forward and pulling straight up.

To install:
  1. Install the lower seat cushion and torque the lower rear seat-to-chassis bolts to 15-20 ft. lbs. (21-26 Nm).
  2. Install the upper rear seat back cushion and torque the upper rear seat back-to-chassis bolts to 15-20 ft. lbs. (21-26 Nm)

Jan 19, 2011 | 1999 Nissan Maxima

2 Answers

Where's the battery? Behind/under the back seat? The battery is dead. 3 doors and the glove compartment are locked and the key won't even unlock them. Help! Thx


in the trunk. you will need to get under the hood if the trunk wont open to charge the battery. There is a post on top of the intake manifild

Nov 26, 2009 | 1997 BMW 5 Series

1 Answer

1997 lincoln town car..pas. seat goes foward but wont go bakwards...any help


Try pushing back as you work the switch forward and backward. The most likely problem is a stuck runner. Remove the two front bolts and the two rear nuts from the seat legs and tilt the seat backwards to clean and lubricate the runners

Oct 11, 2009 | 1997 Lincoln Town Car

1 Answer

I HAVE A 2002 MONTERO MITSUBISHI, THE DRIVER SEAT


you try moving your seat foreward when the car is on flat ground or when the rear is higher than the front.It also happen to my pajero fieldmaster

Sep 10, 2009 | 2002 Mitsubishi Montero

1 Answer

Rear seat tumbled forward for more room in back and seat belt jamed. now back seat can not go back into position.


To fix that scenario, I have to get to the bolts anchoring the seat belt which can be found under the rear seat. Which a socket wrench, remove the bolt freeing the seatbelt to allow you room to release the lock to pull the belt out from the top of the back seat. You may now push the back seat into its upright position and then refasten the seatbelts with the bolt to it's former position under the back seat.

When I in later times need to lower the back seat, I will either loop the seatbelt around the head rest or tie two belts together allowing for slack in case the belt tightens again when trying to move the seat back to its original position.

.....Very frustrating!!!

Jul 29, 2008 | 1999 Volvo V70

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...