Question about 2002 Chevrolet Blazer

Open Question

Crankshaft pulley 02 chevy blazer

When i turn the key it just clicks replaced starter \alternator when i turn the crankshaft back aways it starts half a turn then loud click and wont turn no more with no start

Posted by on

  • Jason Keef
    Jason Keef May 06, 2013

    only one click but its chatged

×

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: 95 chevy tahoe wont start

i checked the battery and its doing the same thing making a clicking noise

Posted on Oct 07, 2008

  • 4 Answers

SOURCE: my 96 chevy Blazer wont start but the battery is

Your pendix on your starter might be stuck, lay down under blazer and tap on the starter with the handle of a srew driver or a small hamme to see if it frees the pendix. You may have a faulty starter. You can jump the starter with a screw driver to see if it works, but if your not familar with that I don't suggest you try that.

Posted on Jul 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to undo front pulley on lanos 1998 1.5 ltr. Is it left hand thred or normal anti clockwise to undo? and how to stop motor from turning? (on front of crankshaft)


Here is a way to rmove the crankshaft pulley screw. Its fa previous solution of mine. But it will work for you. And this is how I always do it.

Get a breaker bar, 18 inch or longer, put on a socket that fits the crank pulley screw. Note the direction the crankshaft rotates when the car is running. Position the breaker bar so that when you turn the key the breaker bar will hit the ground and cause the screw to be loosened.

Ideally the socket will be on the screw and the breaker bar will be touching the ground. Turn the ignition long enough for the starter to turn the engine, and immediately turn the key off. Turn it for a half second and back off. Just long enough for the starter to engage for a split-second.

Aug 13, 2011 | 1999 Daewoo Lanos

1 Answer

Problem with a 2000 chevy blazer not starting


Have replaced starter, alternator , ignition wiring, neutral safety starter switch, still happens ??????? Do you know how to do automotive electrical testing ? Not guessing an replacing parts . Not starting ??? How ? when you turn the key to start does the starter motor engage an spin the engine ? Or when you turn the key to start nothing happens ? A no crank no start or a cranks no start . Plus you shoud learn how the system works before trying to diagnose .

Jun 18, 2017 | 2000 Chevrolet Blazer

1 Answer

Crankshaft Woodruff Key Removal


You are correct, this key does drive both. While I have never tried to remove the keway with out both pulley and lower sprocket you may be able to (my gut says no but anything is worth trying once) I'd position the keyway at the 12 o'clock postion and with a good pair of needle nose pliers see if the key will roll out as you pull up and away with it. If it will not you'll of course have to remove the front of the engine and pull the timing belt, if over 60K miles on belt go ahead and replace with new.

I hope this may have assited and good luck!

Tom

Apr 06, 2010 | 1990 Mitsubishi Montero

3 Answers

96 chevy blazer just clicks and won't turn over.


Hi!
Check the main cable going from the battery to starter rellay.
This could be loose or there is corrosion on the connectors, clean this with a spray like WD40...
To find this cable start from the starter motor and work your way back to rellay and then to battery...
If not.
Check with multimeter if the rellay is fine.
else the starter motor is jammed... it will have to be opened and serviced..

Regards
Berry

Feb 01, 2010 | 1996 Chevrolet Blazer

1 Answer

I have a 93 chevy s-10 blazer. Every so often it


have a look at the ignition switch, the electirc switch on the column, not the key part. also check connections at starter and ground at engine ,make sure there thight and not cororaded.

Dec 16, 2009 | 1993 Chevrolet S-10 Blazer

2 Answers

My 1996 Chevrolet Blazer won't start most of the time. Engine don't turn over, or the starter when I turn the key. All I can hear is some clicking coming from the carbarator & a humming noise under my...


The humming noise you hear is the fuel pump. It is probably your starter soleniod. If you hear an electric click under the dash near the steering column when you turn the key then the ignition switch is ok and your starter needs to be replaced. This happened to me last month.

Dec 08, 2009 | 1996 Chevrolet Blazer

1 Answer

I have a 1993 chevy s-10 blazer it's been siting for 5 years and the two bottom pully are noy moving what can i do


The bottom pulley is typically the crank pulley. If you are starting the engine and that is not turning the starter is not engaging. If it is not the crank pulley it is probably the Power Steering or the alternator. Try tightening the belts to see if that helps. If not, you may soak them in penetrating oil to get them moving again, but it's a long shot!!!

Oct 03, 2009 | 1993 Chevrolet S-10 Blazer

1 Answer

1985 chevy blazer. new batter, starter. turn the


Possibly the switch at the bottom of the steering column, that the rod pulls on. May be loose, or worn out.

Aug 29, 2009 | 2001 Chevrolet Blazer

2 Answers

My 03 impala wont start up ..wen i turn the key jus clickin noise


if the clicking is repeated with out you releasing the key then the battry is in need of charging or replacing, if its a one click each time then the starter motor is faulty.

May 13, 2009 | 2002 Chevrolet Impala

Not finding what you are looking for?
2002 Chevrolet Blazer Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...