Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on May 06, 2013

2004 tahoe c0292 trouble code

I have a 2004 Chevy Tahoe with the check engine light on. I had it checked at Auto Zone and was told it has a C0292 trouble code. What does that mean?

5 Related Answers

Anonymous

  • 2 Answers
  • Posted on Oct 26, 2008

SOURCE: Check Engine Light

I had the problem with the engine light and the ESC light on. At the same time the car would not accelerate. I disconnected and reconnected the battery and works fine now.

Ad

Anonymous

  • 109 Answers
  • Posted on Dec 04, 2008

SOURCE: 2004 Chevy Tahoe stereo wiring diagram

BLACK-ground
RED-accessorie
YELLOW-power 12v
PURPLE-left rear
GREEN-right rear
WHITE-left front
GREY-right front
BLUE-REMOTE
and the other blue one is for remote antenna..

Anonymous

  • 1 Answer
  • Posted on Feb 17, 2009

SOURCE: Chevy tahoe shuts off when driving

i am on here because of an issue i am currently having with a 2004 tahoe, but after reading some the other problems people are having i will let you in on a previous experience i had with a 2002 chevy truck. my previous vehicle was a 02 chevy 2500hd with the 8.1 and the problem started on day when suddenly it shut off. it did restart with no problem. i never had that problem again until a month later and 1500 miles away when i went to texas to visit my sister. this time it took nearly 30 mins before it would restart. it would crank over fine but no fire. then suddenly out of no where it would fire up like nothing ever happened. so anyways to make a long story short i visited two different gm service centers, they did tune ups and diagnostics, and handed me the bills for over 500 dollars and told me that should do it. yea right the problem continued and then i searched online and one item that kept coming up was the crank position sensor. after reading what those people were dealing with i gave it a shot. went to the dealer bought a new sensor ($99) took an hour to install it and i never had the problem again. one last thing im gonna add. i had a friend that drove a late 90s or early 2000s grad prix, she was having the same problem and had her car in and out of the shop and never got it resolved, i told her to have them check the crank position sensor and bingo, she never had the problem again.

Anonymous

  • 2 Answers
  • Posted on Aug 01, 2009

SOURCE: '07 Tahoe; check engine light on steady. Just came

Have a dealer or garage check your Oxygen (O2) sensor. As a quick fix, try disconnecting and reconnecting your car battery. Sometimes this will reset the check engine light.Good Luck!

Anonymous

  • 10865 Answers
  • Posted on Dec 19, 2009

SOURCE: What happens when my check engine light comes on?

Hello. Your vehicle and most other recent ones have on an on-board computer called an Electronic Control Module or ECM. The vehicle computer system has self-testing capability. When the computer senses that there is a problem with some of the components it stores the correspondent trouble code(s) in its memory and lights up the "Check Engine" or "Service Engine Soon" light to tell you that there is a problem and your car needs to be looked at. To properly diagnose what is wrong, you need to take your car to a mechanic or a dealer. The technician at the dealership or a garage will then hook up the scanner to the car computer and retrieve the stored trouble code(s). Then he (she) will look it up in the service manual provided by a car manufacturer. The service manual contains the list of possible codes (about few hundreds) and describes what each code means and what needs to be tested. The code itself doesn't tell exactly what component is defective - it only indicates where to look, what engine parameter is out of normal range. The technician will have to perform further testing to pinpoint a defective part.
Recently many auto parts stores, such as auto zone, offer the free service of scanning your computer and pinpointing the reason why your check engine light comes on. I recommend that you start there as it is free. Regards, Joe
PS please rate my answer. Thank you. Happy Holidays

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

My 2009 chevy cobalt has a hard time starting and rough shifting only when traction control light is on. getting code C0292 says it has something to do with the power train control module.

DTC C0292: VSES Combination Sensor Circuits .

This has nothing to do with the PCM

Circuit/System Description
The electronic brake control module (EBCM) supplies a reference voltage of 12 volts to the yaw rate sensor lateral accelerometer and the steering wheel position sensor. The sensor supply voltage is monitored via an internal feedback circuit to the EBCM microprocessor.

Conditions for Running the DTC
• The ignition is ON.
• Ignition voltage is greater than 9.5 volts.
Conditions for Setting the DTC
The yaw/lateral sensor is setting an internal electronic failure.

Your best bet ,have a qualified repair shop check it out .
0helpful
1answer

On 05 chev Tahoe 2 wheel drive it want crank code co292 what do I do to fix it

C0292
Lost Communications with Engine Control System
EBCM
DTC C0290 or C0292 in Antilock Brake System
Your best bet ! Take it to a quaified repair shop . Do you know what Class 2 data bus is ?

Class 2 Serial Data Line
The class 2 serial data line on this vehicle is a star configuration. The following modules communicate on the class 2 serial data line:
• Audio Amplifier, w/UQ7 and Y91
• Body Control Module (BCM)
• CD Changer (CDX), w/U1S and Y91
• Digital Radio Receiver (DRR), w/U2K or U2L
• Driver Door Module (DDM)
• Driver Seat Module (DSM), w/AN3
• Electronic Brake Control Module (EBCM)
• Electronic Suspension Control (ESC) Module, w/Z55
• Front Passenger Door Module (FPDM)
• Generator Battery Control Module (GBCM)
• HVAC Control Module
• HVAC Control Module - Rear Auxiliary
• Instrument Panel Cluster (IPC)
• Powertrain Control Module (PCM)
• Radio
• Rear Seat Audio (RSA) Controller, w/UK8
• Rear Seat Entertainment (RSE) Assembly, w/U42
• Rear Wheel Steering Control Module (RWSCM)
• Inflatable Restraint Sensing and Diagnostic Module (SDM)
• Transfer Case Shift Control Module (TCSCM), w/NP1/NP8
• Vehicle Communication Interface Module (OnStar), w/UE1
• Vehicle Theft Deterrent (VTD) Module, w/VD1
The class 2 serial data line allows a scan tool to communicate with these modules for testing purposes, checking for DTCs, and to activate/enable/disable functions. These class 2 serial data circuits are bused together via three splice packs and DLC:
0helpful
1answer

How do you replace the break switch on a 2004 Chevy Tahoe. I cant get the clip off

if you are having trouble with clip go down to auto zone tell them what you are doing thay have rental tools for a few bucks thats the easy way hop this helps good luck
0helpful
1answer

2007 chevy tahoe 4 wheei l drive service light on

Hi, it means that the computer that controls the 4wd has detected a problem and set a trouble code. So you have to use a OBD II scanner to scan the car or take the car to any auto zone near you to scan for free if you don't have the scanner. A trouble code will be gotten after the scanning and interpreted to detect the cause of the proble.
0helpful
1answer

The check engine light keeps coming on in my 2004 Chevy Tahoe. At first when it came on, it would show a warning message that states Reduced Engine Speed and the Tahoe wouldn't have any power. Now, it's...

Most auto parts stores have Scanners that can read the actual Codes causing the check engine light- usually for FREE. Google the Codes to determine what needs fixed.

Do not continue to drive it, as it may cause permanent damage!

GL,
Td
1helpful
1answer

Want to reset "service engine soon" light on 2001 Chevy Tahoe

It has to be done with a code reader,the codes have to be erased,but it will come back on if the problem is still there,auto zone can do this for you for free.
0helpful
1answer

I'm getting trouble code p0300 (random / multiple misfire) on my 2004 Chevy Tahoe after changing the plugs and wires. The wires were installed in the correct order. Any help would be appreciated. Thanks

Well, I've seen .060 and .035 on Chevies before, but not .040. Call Auto Zone. Tell them what year, make, model, and engine you have. If they tell you it is .040 then I am lost.
0helpful
1answer

Check engine light is on, motor runs rough, sometimes stalls

Go to Advance or Auto Zone and have them run an obd scan on it and it will pin point why your light is on and could solve your problem. This is often done for free.
Not finding what you are looking for?

1,644 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...