Question about Holden VT

Open Question

2005 holden commodore wagon/lights indicators

R/h indicator remains on when headlamps on but no flash. caused by fixing trailer lamps to vehicle. blown fuse replaced but did not fix problem

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: Warning Indicator Lamps

You need new brke pads

Posted on Oct 21, 2008

Ad
StormStrikes
  • 104 Answers

SOURCE: Malfunction indicator lamp

The Malfunction Indicator Lamp or MIL (Also called the check engine light or service engine soon light) comes on when the on board computer detects an issue with the operation of the engine or transmission.

The best thing to do is to take the vehicle to an auto parts store like Autozone and have them hook up their scan tool to the vehicle and read the code. They can read it, tell you what it is and also tell you what the code means.

If it is pointing to a faulty component or sensor and you replace or repair the component the the light will go off on its own after the computer sees that the malfunction is no longer present.

You can have the code cleared, but if whatever caused the light to come on in the first place is not addressed then it will just come back on eventually.

Posted on Dec 31, 2008

  • 41 Answers

SOURCE: 2004 VW Passat Wagon Headlamp

h7 head light bulb. very easy to replace. the air cleaner box is on the right front and the intake tube is close by. remove either 2 or 3 phillips screws from the upper rad support. remove intake air tubing. then ther should be a rubber cap on outside of headlight assembly, twist bulb out and unplug, install new bulb in opposite order.

Posted on Mar 10, 2009

emissionwiz
  • 76846 Answers

SOURCE: malfunction indicator lamp in my toyota corolla is on how i fix?

The check engine light also called the malfunction indicator comes only when the computer control unit (called the PCM) senses a fault in the electronic controls of the engine and/or the emission system, there are about 200 possible faults that turn the light on, to know what has developed a problem you must have the system tested, this is called an OBD2 fault code test, Kragen and Autozone parts stores do this testing for free.

Posted on May 27, 2010

emissionwiz
  • 76846 Answers

SOURCE: malfunction indicator lamp illuminated on daewoo lacetti

The check engine light comes only when the computer control unit (called the PCM) senses a fault in the electronic controls of the engine and/or the emission system, there are about 200 possible faults that turn the light on, to know what has developed a problem you must have the system tested, this is called an OBD2 fault code test

Posted on Jun 02, 2010

Testimonial: "Thanks, You have confirmed what I thought needed to happen, will organise one tomorrow."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have Holden Cruze 2010 JG. Malfunction indicator lamp comes on and Electronic stability control and traction control system off both light up!Car has spent more time getting fixed then driving it


That's a common issue with the Holden cruz as well as as the Ve commodore. I've had many come in with this issue and most of the time there is nothing wrong other times a bit of dirt/grit builds up on a sensor and throws up an error being the light and ESC/TC,It just needs resetting with a scan tool. Some places will do it for nothing others will charge depends on the mechanic!. It only takes a minute

Oct 06, 2016 | Holden Cars & Trucks

1 Answer

How do I fix my 99 blazer the dome lights won't turn on and the 4 who drive won't light up or work


In the instrument panel fuse box fuse # 8 CTSY LP 10A ,that's for the dome lights, fuse panel is left side of IP. What are you talking about 4 who drive won't light up or work ? 4 wheel drive ? Do you have two speed automatic or two speed selectable ?
Switch Indicator Lamps Do Not Light - One or More ? Check fuse #15 IP fuse box 10A 4WD . This is for two speed auto !

Circuit Description

The indicator lamps circuits consist of 5 individual lamps contained inside the mode/range switch assembly, they are AUTO, 4WD, 2HI, 4HI, 4LO and NEUTRAL. The AUTO, 4WD, 2HI, 4HI, and 4LO lamps are contained inside their respective range button. When the ignition is ON, the transfer case shift control module illuminates the indicator lamp that corresponds to the current ATC gear position by providing a ground through a current limiting driver.
The transfer case shift control module flashes each indicator lamp after a shift has been requested and will continue to flash until the transfer case shift control module can complete the shift. After a shift to AUTO, 4WD, 2HI, 4HI, or 4LO is made, the transfer case shift control module will flash that indicator lamp until the transfer case shift control module receives a high voltage signal on CKT 1695 from the front axle switch.
A solid state circuit located inside the switch supplies ignition voltage to the lamps. The solid state circuit also receives voltage whenever the headlamp switch is in park or headlamp position. When the solid state circuit receives voltage from the headlamp switch it will reduce the voltage that it supplies to the indicator lamps, dimming the lamps when the headlamps are ON.

Feb 07, 2015 | Cars & Trucks

3 Answers

My left turn signal started to only work about 50% of the time, it wont work hardly at all now. the right turn signal is fine. When I try to use the left turn signal, there is no dash indicator lights


Hey Bob how's it going ? I have been looking at Chevy service info for your vehicle and this a little on the complex side or that is the way it sounds from the turn signal description !
Turn Signal Lamps
The smart flasher (GMSF) is an automotive flasher designed to accept turn, hazard, and brake inputs. The GMSF will provide corresponding outputs to the exterior lamps and instrument panel turn signal indicator lamps. This lighting system has dedicated lamps for the turn/hazard functions and dedicated lamps for the brake function. The system incorporates the use of flash rates for diagnostics. The flash rate is a calculation of the number of flashes that occur within a 60 second period. This system uses a percentage of on-time to off-time called duty cycle. For the bulb outage condition, the indicator of the vehicle side on which the outage occurs shall assume bulb outage flash rate mode. The opposite side indicator will assume the normal flash rate mode for an input from the non bulb outage side of the vehicle. Hazard warning lamp outage will maintain a normal flash rate as long as 2 or more exterior signaling lamps are functional. During all modes of operation, the IPC will receive the same flash rates and duty cycles that the exterior lamps receive. The IPC will then control the indicators in the cluster. The vehicle operator will be provided with an audible and visual indication of the flasher operation. Below is a table with flash rates and duty cycles:
Are all your bulbs good ?
Operating Condition
Flash Rate
Duty Cycle
Normal
75 to 105 flashes per minute
45% to 55%
Turn Signal Lamp Outage
2 or 3 times faster than normal flash rate
35% to 55%

Feb 02, 2015 | 2005 Chevrolet TrailBlazer

1 Answer

I have a vn commodore wagon. Keeps blowing indicator fuses


sounds like an earth problem , check the witing to the indicators for wear , good connection etc , do this to all indicaters , if not experienced in auto electrics worth getting an mechanic , will save you time and money

Nov 08, 2014 | Cars & Trucks

1 Answer

What is the towing capacity 2007 holden vz station wagon? 6 cylinder


Its usually in the drivers handbook. Probably around 2/3rds the vehicle weight with a braked trailer. Call a local towbar fitter who may have an all makes reference book.

Jun 30, 2014 | 2006 Holden Commodore SS

1 Answer

Malfunction indicator lamp on


1. The failure lamp general descriptions
Fault indicator light on the dashboard; General color is red (refer to the vehicle manual) on electricity self-inspection, failure indicator Chang Liang out after 2 seconds; Efi system failure after the light; General failure, failure indicator light Chang Liang; Serious failure, failure indicator light flashing; Failure disappears, failure indicator light put out automatically.auto diagnostic tool

Mar 26, 2013 | 2005 Ford E-250 Van

1 Answer

Can you tell me what the symbol on dash is 'far left' please? vt holden commodore 1999


I am not familiar with your vehicle, Ive never heard of it. However a lightning bolt symbol would probably indicate a problem with your electrical system, possibly the battery or alternator.

Sep 20, 2012 | 1998 Holden VT Commodore

2 Answers

2005 Ford Escape - Door Open Indication Light & Horn Alarm Sounds


This is probably caused by:

a loose door switch, or

a loose connection to a door switch, or

a defective (dirty / corroded) door switch.

There is a false signal being sent that a door is open / ajar.

Oct 20, 2009 | 2005 Ford Escape

1 Answer

2003 head lamp assembly


Did you touch the glass on the new headlamp bulb?
Your sweat from your fingers will cause the bulb to blow because halogen lights heat up really quickly.
Check the earth(negative) wires around the rear lights and also check the socket for your trailer.
Slight corrosion will cause all sorts of problems.
It`s always worth checking earth connections just to make sure you can rule that problem out in the future if a bulb blows.
Hope you understand me. If not I will try to make it a bit simpler.
My wife says I can fix computers, cars and washing machines but can`t work a vacuum cleaner round the house.

Jan 18, 2009 | 2003 Land Rover Discovery

1 Answer

No front lights work


check the headlight relays under the hood also fuses under the hood and in the interior fuse pannel.

Nov 18, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Holden Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you a Holden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...