Question about 2009 Dodge Avenger

1 Answer

ABS 2009 avenger, ABS and brake lights stay on, cleard codes still came back, had dealer clear codes, still came back. dealer says its a speed sensor,i replace all 4, then he tells me its the brakes i have new breaks put on, now he is telling me its a fuse, i checked all fues's, nope not it AGAIN, now he says its the ABS sending unit or the ABS modutaltor and he said if you replace one better replace both, now they want A NOTHER 1300.00. can ANYONE HELP ME

Posted by on

  • Grant Humphry
    Grant Humphry Jun 15, 2017

    Hi bobby do you know what code it is sending up at all

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 1,265 Answers

The person you have checking your vehicle is a parts replacer. Not a mechanic. He's just hoping to hit it right, eventually. Have someone check the sensors at the rotors my friend. Most likely one is out of position and not picking up the proper message for the computer. Yes, once the light is out, from all the other work he's done, it will come back on each time. That's just the nature of the beast. If it is just a sensor at the rotor out of adjustment, the light wont come back on.

Posted on Jun 15, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: lights staying on

speed sensor prob went bad. it's at the tail end of the transmission on the drivers side

Posted on Aug 23, 2008

  • 2 Answers

SOURCE: Dodge caravan sport 2001

The 2001 Chrysler and Dodge minivan's are plagued with wiring issues, specifically in the brake system where it was redesigned, rerouted, and re-engineered SEVERAL times.

You have a wiring issue (likely wire chaffing in the under carriage).

Posted on Dec 04, 2008

RudolfDiesel
  • 100 Answers

SOURCE: What is a Code 84

Hello
Welcome to FY
I would check your speed sensor located on the rear end this is on top of the housing this will throw that code too.
RD

Posted on Jan 12, 2009

  • 1 Answer

SOURCE: abs and brake lights both stay on

most likiely is a wheel speed sensor for the abs system that hasf ailed

Posted on Feb 01, 2009

  • 74 Answers

SOURCE: dodge ram1500 brake light abs light spedometer odometer no work

you should have your vehicle scanned with OBDII.(on board diagnostics) . take it to a shop and tell them your engine light is on and they'll hook a computer to it and find out why

Posted on Feb 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Abslight stays on. How to fix? This is a2007trailblazer?


First you need to have EBCM - electronic brake control module check for DTC'S - diagnostic trouble code's . If the light is on there is a code stored . I think most part stores can do this and for free . After you find out what code is stored , looking up that code in service repair information for diagnostic trouble shooting chart would be next step . There are a few codes too.
DTC C0035 or C0040
DTC C0045 or C0050
DTC C0110
DTC C0131
DTC C0161
DTC C0186
DTC C0196
DTC C0201
DTC C0240
DTC C0241 or P0856
DTC C0244 or P1689
DTC C0245
DTC C0283
DTC C0287
DTC C0290 or C0292
DTC C0455
DTC C0550
DTC C0558

Find the code do the diagnostic's , fix the problem , wiring issue's , a sensor , bad module ,what ever it is . The light will go out then . Here is a sample of code discription .
• DTC C0035 Left Front Wheel Speed Sensor Circuit
• DTC C0040 Right Front Wheel Speed Sensor Circuit

Dec 30, 2016 | 2007 Chevrolet Trailblazer

2 Answers

2009 Buick enclave and the stabilitrak light comes on when driving and the double brake symbol and slippery when wet the car functions fine


Most common issue is wheel speed sensor bad or reading poorly because wheel bearing is worn. GOOD scan tool will read ABS codes and tell you which wheel.

Sep 08, 2016 | 2009 Buick Enclave

1 Answer

ABS, Parking break, and ESC light all stay on


On many vehicles, there is a VSS (vehicle speed sensor) that is used with the ABS system. If it fails, the ABS and BRAKE lights will come. As I don't have ESC, I can't vouch for it being involved, but it is related. Usually replacement of the defective sensor will clear all fault indications.

Feb 09, 2016 | 2009 Kia Sportage

1 Answer

Replaced wheel bearing and speed sensor on RF, 2000 f350 diesel dually. Drove 1 month about 1000 miles, now I get c1145 and c1230 with abs light. Any ideas?


ABS code C1145 - Ford Truck Enthusiasts Forums

www.ford-trucks.com > ... > 1997 - 2003 F150
Aug 20, 2009 - ABS code C1145 1997 - 2003 F150. ... C1220 Yellow ABS WarningIndicator Failure (2) C1222 Wheel Speed ... C1230 Rear ABS Sensor (Electrical/Static) (2) ... ABS light on (Anti Lock Brakes) and I hear pump when in turn ...
Oct 9, 2010
ABS code C1206-2003 F150 SuperCrew
Aug 13, 2007
ABS light C1230
Oct 22, 2006
ABS light on DTC's C1229,C1230
Nov 18, 2002
More results from www.ford-trucks.com

Nov 17, 2015 | Cars & Trucks

1 Answer

The brake light and ABS light are on in the dash. I changed all 3 wheel speed sensors and the light won't go out. I hooked up a codes reader but it doesn't tell me why the lights stay on.


There are 4 wheel sensors for the ABS not 3 and the brake light may be the sensor telling you that the brake fluid in the reservoir is low and needs topping up

Jan 27, 2015 | 2001 Dodge Dakota

1 Answer

ABS and BRAKE lights


Did anybody said ABS sensor,could be bad.

May 05, 2013 | 2009 Dodge Avenger

1 Answer

ABS light in panel came on and cruise control stoped working at same time


2009 avenger, ABS and brake lights stay on, cleard codes still came back, had dealer clear codes, still came back. dealer says its a speed sensor,i replace all 4, then he tells me its the brakes i have new breaks put on, now he is telling me its a fuse, i checked all fues's, nope not it AGAIN, now he says its the ABS sending unit or the ABS modutaltor and he said if you replace one better replace both, now they want A NOTHER 1300.00. can ANYONE HELP ME

Jul 22, 2011 | 2009 Dodge Avenger

1 Answer

2000 landrover discovery abs tc and htc light came on had the brakes and rotors replaced and cleaned sensors. speedometer is working at first and then stops. brake light comes on and another light comes...


Hi I dont know weather this will couse the problem,but you should always clear the codes when you have done the work that the codes told you abaout in the first place.
personaly I would get the codes cleard first before looking into the other stuff.
hope this was some help.

Mar 20, 2011 | 2006 Land Rover LR3

1 Answer

In my 2009 corolla s, my abs and brake indicator lights keep turning on and off during multiple driving trips. sometimes, when i start the car, the lights are on, then when i'm driving, they turn off. ...


I have a 2009 LE and the abs & brake warning light came on. Took it to the dealer, it is a known problem on some corollas. They ordered a speed sensor ($650) which is covered on the 60K warranty. The light went off the next day (part is not yet installed).

Jan 30, 2010 | 2009 Toyota Corolla

1 Answer

ABS light on!


Its possible you damaged a rear wheel speed sensor when you did the strut job. If the wire was pulled tight when the strut was removed it could have pulled the copper strands in the wire from the sensor causing a open circuit. This is not uncommon. You need to have the ABS system scanned for codes and see which rear wheel sensor is effected. If you were to just clear the code it will just come back on. With the ABS light on, the ABS system is deactivated and the brake system works normally as a car without ABS.

May 15, 2009 | 1999 Toyota Avalon

Not finding what you are looking for?
2009 Dodge Avenger Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...