Question about Citroen Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Take out the small screws that hold your turn signal/marker lights on. This will allow you to reach in and undo the three (if I remember right) 10mm nuts on the back of the fog housings that hold them in the bumper. Once they're removed, press on the back of the fog housing and the foglight assembly will pop out of the bumper. Then you can replace the bulbs.
What I did on my Z is something you might consider - while I had them out, I took them apart (just a couple screws and bolts, very easy). Open it up so that you have access to the glare guard - the cup that sits in front of the bulb. This blocks forward projection of the light, and instead bounces it onto the reflector to be spread very wide (but not far forward) in a fog beam pattern. I used pliers to physically break the guard off the housing, so that instead of a wide, shallow fog pattern, I had a forward-projecting driving beam. I also swapped the 35w OEM bulbs for 55w higher-output superwhite bulbs (this increase in power consumption is not enough to cause any risk to the wiring or fusing, by the way - it worked for years for me). Then put them back together and reinstall them - you'll find a drastically improved light pattern for night driving, and they're still low enough to the road to cut under most fog. Especially since I always felt that the Z headlights were pretty pathetic for output (at least until I installed HID lighting), this was a great mod to make to the car.
Posted on Sep 04, 2008
Posted on Jul 15, 2009
Park the Dodge Caliber on a flat paved or concrete surface. Turn the steering wheel all the way to the side opposite the headlight you are replacing. In other words, if you are replacing the left headlight, turn the wheel all the way to the right. Apply the parking brake and release the hood latch.
Posted on Dec 28, 2009
remove x2 T30 screws from the wheel arch liner and pull it back giving you acsess to the rear of the lamp. Simply disconnect the connector and turn the bulb anti clockwise to remove.
Posted on Mar 06, 2010
Tips for a great answer:
Aug 16, 2015 | 2005 Citroen Xsara Picasso
Feb 21, 2015 | 2001 Citroen Xsara Picasso
Nov 08, 2014 | Citroen C4 Cars & Trucks
Jun 29, 2014 | 2011 Citroen C4 1.4
Sep 21, 2012 | Citroen C4 Cars & Trucks
Jul 27, 2011 | Subaru Forester Cars & Trucks
Jan 04, 2009 | 2004 Jeep Grand Cherokee
319 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: