Question about 1970 Oldsmobile Cutlass

Open Question

Flashers turn signal clignotant work

What is problem when i START my cutlass 1970 the hazard flash 30 time. Regards,

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

burzerko
  • 254 Answers

SOURCE: Where is the turn signal flasher located

The flasher is located on the fuse block. The other thing that may be wrong could be the actuall switch for the turn signals which is located inside the steering coloum.

Posted on Jul 01, 2008

michigan man
  • 3533 Answers

SOURCE: Both turn signals light, but do not blink

under the dash on the driver side there is a round or square sliver box that should say turn signal or flasher on it in the fuse box.

Posted on Feb 26, 2009

mechanicm639
  • 253 Answers

SOURCE: wher is located the hazard signal flasher on a

Under the drivers side of the dash. There may be a plastic cover you have to remove to see it.

Posted on May 07, 2009

  • 580 Answers

SOURCE: can't find turning signal flasher for 1994 olds

This switch is mounted in you steering column where the signal stalk meets the column

Posted on Jul 13, 2009

  • 291 Answers

SOURCE: Hazard flashers do not work. Turn signals do.

make sure you replaced right flasher... by turning on turn signal then grab flasher if it is clicking it is the wrong flasher... there are two flashers... if you have right flasher make sure brake lights work properly.... usually the fuse for the hazards is also the brake light fuse...let me know

Posted on Aug 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Turn singles and hazards are not working on my 2001 deville


I would replace the turn signal hazard combo switch.

Nov 28, 2016 | Cars & Trucks

1 Answer

1970 olds cutlass turn signals not working


Most likely it is the signal cam in the column. I had one in a 1970 Torino about 35 years ago do the same thing. The contacts just get old and wear out. The hazard flashers work through a separate circuit. Also I will check to see if the turn signals have a separate flasher relay from the hazard flasher. Look under your steering column and see if it has one or maybe two round stainless steel relays. Post back.

Nov 26, 2015 | 1970 Oldsmobile Cutlass

1 Answer

Turn lights blink with hazards but not with turn signal..flasher replaced. is It the multifunction lever then??


There should be a turn signal flasher and a hazard flasher. They are two different parts. If you replaced the hazard flasher and not the turn signal flasher than I would start by replacing the turn signal flasher.

One thing you can do once you find the turn signal flasher is to unplug it and use a jumper wire between the two pins of the connector then turn the key to the run position and place the turn signal lever in the left or right position. If the turn signal lights know light up than the turn signal flasher is the problem

Sep 09, 2014 | 1997 Oldsmobile Cutlass Supreme

2 Answers

Where is the turn signal flasher located on a 1992 oldsmobile cutlass cirea


SOMETIMES THE FLASHER IS IN THE FUSEBOX , SOMETIMES IT WILL BE UNDER THE DASH NEAR THE STEERING COLUMN. THERE ARE TWO FLASHERS ONE FOR TURN SIGNALS & ONE FOR HAZARD LIGHTS. THE TURN SIGNAL FLASHER MAY BE YELLOW & ONE OF THE WIRES WILL BE PURPLE. YOU CAN TURN ON THE HAZARD SWITCH IF THEY WORK YOU CAN LOCATE THAT FLASHER BY THE CLICKING SOUND & ELIMINATE THAT FLASHER & LOOK FOR THE YELLOW PLASTIC ONE. A SMALL MIRRIO MAY BE HELPFUL UNDER THE DASH.

Dec 26, 2010 | 1992 Oldsmobile Cutlass Ciera

1 Answer

Turn signals dont work


For 1993 Oldsmobile Cutlass Ciera 3.3L FI OHV 6cyl. you have two flasher units, one for Hazard Light and one for Turn Signal...

The hazard flasher is located in the convenience center, under the dash, on the left side kick panel. The turn signal flasher is installed in a clamp attached to the base of the steering column support inside the car. In all cases, replacement is made by unplugging the old unit and plugging in a new one.

Hope this help (remember comment and rated this help).

May 12, 2010 | 1993 Oldsmobile Cutlass Ciera

1 Answer

I am trying to locate where the flasher for the turn signals goes on my 96 cutlass ciera


there are two flasher for this car, one for the hazards and one for the turn signals, the turn signal flasher is located behind the center of the ashtray,the hazard light flasher is located on the fusebox center.this fuse center is located behind the right side of the dash to the right of the glove box, hope this helps.

Mar 01, 2010 | 1996 Oldsmobile Cutlass Ciera

3 Answers

Hazard flashers do not work. Turn signals do. Changed relay. Nothing. Ugh. 1992 oldsmobile cutlass supreme


You changed the hazard flasher or the turn signal flasher? It has two, one for the hazard and one for the turn signals

Aug 31, 2009 | 1992 Oldsmobile Cutlass Supreme

3 Answers

Turn signals wont work fuses are good?


the hazard switch above the radio is your problem. if you put on your signals and they don't flash turn hazards on then off and they will flash. (changing this *** will fix your problem

Aug 30, 2009 | 1999 Pontiac Grand Am GT

1 Answer

Turn signals will not flash


There is a Small "FLASHER UNIT" that is Located under the dash that Functions just like the Hazard flasher and also looks like it , Locate it and replace it and this should solve your problem.

Jan 09, 2009 | 1994 Oldsmobile Cutlass Ciera

2 Answers

Turning signals have stoped flashing.


The hazard flasher is located in the convenience center, under the dash, on the left side kick panel. The turn signal flasher is installed in a clamp attached to the base of the steering column support inside the car.
hope this helps!

Jul 25, 2008 | 1996 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1970 Oldsmobile Cutlass Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...