Question about 2006 Nissan Xterra

Open Question

Error code 1764

How much it cost to replace a drive clutch solenoid valve.

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 suzuki reno code po734


lots! (can talk this all day) (a/t are no simple)
find a smarter shop!
going to a transmission shop they go , gee, that is all we know
here, swaps (or rebuilds only) AAMCO?
first stop is:
try a real ASE mechanic that can do the many tests on car.
called ON CAR tests, in the FSM
all my answers are for usa, cars,if not ignore all my posts.

https://suzukipitstopplus.com/Products/1064-2005-forenza-reno-service-manual.aspx

$4 and is ReAL, not fake or cloned'

goggle find my ASE shop, BINGO.
type zip bingo2.

700 means tranny errors, any. (ignore
734 ( serious)
check levels yet, per above method(link?) step by step?
check fuses just in case.
oddly this car has a separate TCM tranny brain,
that drives 6 solenoids inside the box.
most suzuki a/t there is a secret( in fsm on all that do)
manual test mode. on most you un plug TCM connector and drive
to see if 4th gear really does slip, my guess is yes.
if yes slips, its bad trans, of no slip bad solenoid.
watch out manual mode can skip gears, #2 or 3, so test only 4.

replace the valve body, we do on regular trans, not sure
if that works on this transaxle type? (i dont have the book on this box)
in my shop i can hot wire solenoid(before retired)
this proves not TCM and is in the box
then i check solenoid coil ohms. 10 ok , 0 bad infinity bad.
10 can be 20 , idont know, the book above tells coil spec.
the soleniods can be bench tested.
but takes a real ASE MECH, NOT AFRAID TO DO ALL FSM CHECKS ON CAR. FACT.


fsm quote

Trouble Code: P0734 (2.0L L4 VIN - Auto)
4thGearr Incorrect Ratio (or slips)



Number of Trips to Set Code: 1

Trouble Code Conditions:
TCM detects any inconsistency in the actual gear ratio.

Possible Causes:

Input clutch solenoid valve

Front brake solenoid valve

Direct clutch solenoid valve

High and low reverse clutch solenoid valve

Each clutch

Hydraulic control circuit

Jan 15, 2016 | 2005 Suzuki Reno

2 Answers

I have been getting the code p0740 it says something about the torque converter clutch circuit. it doesn't seem to be going into over drive. dose anyone have any suggestions I can try.


On some cars, there is a TCC solenoid in the transmission which can be replaced by removing the bottom pan. In some cars this solenoid can't be accessed without major disassembly.

Jun 04, 2015 | Cars & Trucks

1 Answer

What is 2001 mazda tribute p0741 error code


Possible causes
- Low transmission fluid level
- Dirty transmission fluid
- Faulty torque converter clutch solenoid valve
- Torque converter clutch solenoid valve harness or connectors
- Torque converter clutch solenoid valve circuit is open or shorted
- Transmission internal mechanical problem

Apr 26, 2015 | 2001 Mazda Tribute

1 Answer

How do replace a speed sensor on an 1996 infinty I-30 ?


1996,

ok cars have 2 to 5 speed sensors.

so saying that means nothing.

but 734 does, first post ever with speed and code in one.

usually its not.

1996 what , kia? or Infiniti? perplexed i am.

734

that is tranny, code, so why condemn the sensor

i do take it off and clean the black magnetic crap on the end every time. do so , often. and win.

Trouble Code Conditions:

NOTE: If DTC U1000 is displayed with this DTC, first perform the trouble diagnosis for DTC U1000. Diagnostic trouble code P0734 is detected when A/T cannot be shifted to the 4th gear position even if electrical circuit is good.

Possible Causes:



  • Shift solenoid valve A (On stick.)


  • Shift solenoid valve B (On stick.)


  • Shift solenoid valve C (On stick.)


  • Pressure control solenoid valve A (On stick.)


  • Forward and direct clutch assembly


  • U/D clutch


  • U/D brake


  • 2nd coast brake


  • One-way clutch No.1


  • Hydraulic control circuit


(so the FSM then has you conduct many tests to find true cause.)_



A/T are very very complex animals.



did you connect a scan tool that can SEE ALL factory DTC codes>

if not , you are blind..

cheap readers dont do that. they blind you.



the TCM can tell that 4th is not attained

by seeing the VSS speed too slow, that means the tranny is slipping

or is not in 4th gear, or the VSS fibbing its buns off (clean it , reset code, and drive)

Jun 24, 2014 | 2003 Kia Spectra

1 Answer

It also has code po743 and po755


P0743 - Torque Converter Clutch Circuit Electrical
Possible causes- Faulty torque converter clutch solenoid valve
- Torque converter clutch solenoid valve harness or connectors
- Torque converter clutch solenoid valve circuit is open or shorted
- Low transmission fluid level
- Dirty transmission fluid
Tech notes This is an electrical problem code. Could be a problem to the harness to the TCC solenoid, the TCC solenoid connector or the TCC solenoid it self.
P0755 - Shift Solenoid B Malfunction
Possible causes- Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid B valve
- Shift solenoid B valve harness or connectors
- Shift solenoid B valve circuit is open or shorted Tech notes When the a transmission solenoid is malfunction, in most cases the problem is not the electrical part of the solenoid; the problem is foreign material obstructing the mechanical function of the solenoid or the flow of the fluid through the transmission valve body. If the transmission fluid is very dirty, it is recommend changing the transmission fluid and if possible removing the transmission pan for further diagnosis. Excessive debris or metal particles on the transmission pan could be an indication that there is a transmission mechanical failure and that the transmission will need to be rebuilt or replaced.

Read more: http://engine-codes.com/p0755.html#ixzz27PjeNdA5

Sep 24, 2012 | 2000 Jaguar S-Type

1 Answer

Codes po740, po743 ? po753 all at once. Where should i begin for repairs?


You must do the diagnostics for each code.
Here are the possibilitesP0740 DODGE - Torque Converter Clutch Circuitxicon.jpghttp://engine-codes.com/p0740_dodge.htmlForum CodePossible causes- Low transmission fluid level
- Dirty transmission fluid
- Faulty torque converter clutch solenoid valve
- Torque converter clutch solenoid valve harness or connectors
- Torque converter clutch solenoid valve circuit is open or shorted
P0743 DODGE - Torque Converter Clutch Solenoid Circuitxicon.jpghttp://engine-codes.com/p0743_dodge.htmlForum CodePossible causes- Faulty torque converter clutch solenoid valve
- Torque converter clutch solenoid valve harness or connectors
- Torque converter clutch solenoid valve circuit is open or shorted
- Low transmission fluid level
- Dirty transmission fluid

P0753 DODGEP0753 DODGE - 3-4 Shift Solenoid Relayxicon.jpghttp://engine-codes.com/p0753_dodge.htmlForum CodePossible causes- Faulty shift solenoid valve
- Shift solenoid valve harness or connectors
- Shift solenoid valve circuit is open or shorted
- Low transmission fluid level
- Dirty transmission fluid

Jul 03, 2012 | 1997 Dodge Ram 1500 Club Cab

1 Answer

WHERE IS TORQUE CONVERTER CLUTCH SOLENOID LOCATED AT ON BUICK LESABLE CODE PO742


THE TCC SOLENOID LOCATED ON THE VALVE BODY. IF YOU HAVE RWD TCC SOLENOID BOTTOM PAN VALVE BODY IF YOU HAVE FWD VECHICLE TCC SOLENOID IN THE SIDE PAN VALVE BODY. RWD IS REAR WHEEL DRIVE AND FWD IS FRONT WHEEL DRIVE.

Aug 15, 2011 | Buick LeSabre Cars & Trucks

1 Answer

What is the 755 code on the 2002 ford explorer. Diagnostics.


It could be a failing shift solenoid, the shift solenoids are in the valve body. You would need to remove the pan of the transmission, drain the fluid and replace that particular solenoid, but that may not be the only problem with it. It could be the the wiring harness inside the tranny or several other things that would set that code. You shoukd have it checked out soon. The more you drive it with a problem the more it could cost you, because you could be damaging more parts inside of the tranny like clutches, drums and band.

Dec 30, 2010 | 2002 Ford Explorer

2 Answers

How much will it cost to fix code P0744 for a 2005 Nissan Altima?


The possible causes of the error code you are facing are

  • Torque converter clutch solenoid valve is faulty
  • Hydraulic control circuit failure
  • Valve body problems
  • Or any problem with the clutches.
Unless we test them step by step we cannot identify the exact fault . SO estimating the cost of repair cannot be done like shooting in the dark without knowing the problem.

Nov 16, 2010 | 2005 Nissan Altima

1 Answer

P 1750 cod come up. has shifting problem.


DTC P1750: Mechanical Problem in Hydraulic Control System of A/T Clutch Pressure Control Solenoid Valve Assemblies A and B, or Problem in Hydraulic Control System

NOTE:
• Record all freeze data and review General Troubleshooting Information before you troubleshoot.
• Keep these replacement solenoid valves on hand:
• A/T clutch pressure control solenoid valves A and B
1. Check whether the OBD II scan tool indicates another code. Does the OBD II scan tool indicate another code? YES - Perform the troubleshooting flowchart for the indicated code(s). Recheck for code P1750 after troubleshooting. NO - Go to step 2.
2. Turn the ignition switch OFF.
3. Replace the A/T clutch pressure control solenoid valves A and B.
4. Reset the PCM memory with the PGM Tester or by removing the BACK UP fuse in the passenger's underdash fuse/relay box for more than 10 seconds .
5. Drive the vehicle for several minutes in 1st, 2nd, 3rd, 4th, and 5th gears in the position.
6. Recheck for code P1750. Does the OBD II scan tool indicate code P1750? YES - Replace the transmission. NO - The problem has been corrected

Jul 08, 2009 | Acura TL Cars & Trucks

Not finding what you are looking for?
2006 Nissan Xterra Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...