Question about GMC Jimmy

Open Question

High beam not working

One high beam not working...replaced bulb..dtill not working....checked socket.... on high both wires are hot...Why does the light not work?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: LOW BEAM LIGHTS

Hi Rich Million,

Check the bulbs for the low beam problem and if they're ok, check the fuses under the bonnet (hood) which are found in the fuse box. If you've already checked those, go to the fuse box inside the vehicle.

Still no luck....remember that there are fuses and relays inside the cabin behind the kick panel.....You may find that there is a problem with the main fuse box.....If you drive over rough terrain, check the connections under the main fuse box....even if your roads are all smooth, it's still worth checking.....

Regards Johngee10

Posted on Sep 25, 2008

Mikey108
  • 475 Answers

SOURCE: 05 Jeep Wrangler High Beams Work, Low Beams dont

There are no relays for the headlights. Your problem could be from the headlight switch. You would have to check and see if you have power coming out of the switch on the low beam side. Check with a test light.

Posted on Dec 15, 2008

MsMithra
  • 79 Answers

SOURCE: Headlights not working

If all fuses and bulbs are fine, it's probably a problem with the wiring harness. Take it to the dealer. Wiring harnesses are not something to do by yourself unless you're experienced with wiring on the specific car.

Posted on Feb 05, 2009

heavymetal77
  • 721 Answers

SOURCE: low beam headlight /daytime light are not working

It's on the driver's side. Remove all the plastic & it's in there.Big rectangle, black box,about 1.5" thick,lotta wires.

Posted on Jun 22, 2009

ghost4548
  • 776 Answers

SOURCE: 1997 Hyundai Accent is acting funny in the

There's only one relay, but two fuses, both located in the underhood fuse/relay box.

53ee18a.jpg Sounds like you have a wiring problem since sometime the left works and the right doesn't, then the right works then the left doesn't. Might be the multi-function switch on the steering column in combination with the connector M10-1, EM01, SE14 & 16.

Posted on Jun 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have a 2007 Chrysler sebring and drivers low beams will not work.


try the fuses or wire fuse links , the only other thing in the circuit is the wires broken or the light low switch is bad

Nov 08, 2014 | 2007 Chrysler Sebring Sedan

1 Answer

1999 cadillac seville wiring diagram


Check wiring with a test light or volt meter. switch lights to low beam, connect volt meter N probe to a good ground then probe the light socket for the low beam power cable, should show battery voltage, now switch to high beam and test for battery voltage if ok remove the grounded meter probe and probe the cable in the socket that you have not tested this is the ground cable, battery voltage should show if ground cable is ok. If no voltage repair cable ,If voltage present check filament on bulb high beam perhaps the new bulb is faulty.

Jul 10, 2014 | 1999 Cadillac Seville

1 Answer

Day time running light vw passat


the wire inside the bulb socket could be rusted and broken. wire connection broken before it reach the bulb. socket mostly burn up or dirty, missing a seat. replace socket and test the socket wire connection. wrong bulb also

Mar 22, 2014 | Cars & Trucks

1 Answer

No power to right side (PS) headlight low beam plug socket, new bulb, fuse is good. High beam works, blinker works, park light works. just no low beam and doesn't register any voltage on volt meter.


check low beam fuse when switched on if it has voltage registering across the fuse ,if there is voltage across the low beam RHS fuse then it is possibly a pinched wire from the headlight running back towards inside of the car

Jan 30, 2014 | Cars & Trucks

1 Answer

I have a 96 Cavalier and my passenger side low beam does not turn on (high beams OK) & my horn doesn't work either. I've replaced the bulb with no luck. Any suggestions?


The light socket itself could be bad. If you turn on the lights and put a meter on it you can verify there is power at the socket. If not you still have to trouble shoot some more. No power at socket could be wiring that went bad or melted but you will have to remove the socket and test the wires themselves. No power at the wire bare ends you have to go back to the fuse distribution and check that. Low voltage sucks for this very reason. good luck.

Nov 12, 2012 | 1996 Chevrolet Cavalier

1 Answer

I have a 92 toyota ccamry v6 and.my high beams dont work. the blue high beam light dont work too. I check all the fuse but its okay, where is the high beam relay located and how do I.run a simple test.


I will assume that you have upgraded the lights on your 92 Camry as I don't remember them coming with a blue high beam; but that is ok.I think what you are saying is that you added lights to your Camry. Problem is you may be overloading your light circuit depending upon what you have added or changed on your vehicle. You may want to check a wiring diagram, refer to www.chilton.cengage.com and also check your wiring starting where your bulbs sockets are and see if anything is wrong there. Also take a good highbeam bulb for this auto and insert it in the highbeam bulb socket. See if a new bulbs works.

Apr 03, 2012 | 1992 Toyota Camry V6

2 Answers

My passenger side headlight does not work properly, and I cannot understand why. There are several oddities about it: 1. The bulb does not illuminate in low beams, but it works in high beams. 2. I've...


Did you check the ground wire for that light? Using your voltmeter, put the positive probe on the battery terminal and your negative lead to the pin/socket that provides ground for the lamp. If you are reading 0 volts, you need to check the ground wire for proper grounding.

Mar 24, 2017 | 2008 Chevrolet Cobalt

2 Answers

Headlamp breaker location


if any of the headlights work the breaker is good, very rare to have a bad breaker. do both high beams work? if so most likely the bulb.

Sep 29, 2009 | 1999 Chevrolet Lumina

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...