Head bolt torque for a 2006 2.2 hdi peugeot 807

SOURCE: Torque setting for peugeot 206

hallo
If you have normal 1.6 liter 206:
max bolt lenght:176,5mm
20Nm and aditional 240°

1,6 liter 16valve engine
max bolt lenght:122,6mm
20Nm and aditional 260°

Marko

SOURCE: 1.9 hdi injector removel on a 807 peugeot

youll need to get a slide hammer and either make or get hold of a hdi injector removal tool, as pri bars wont help when there stuck solid ive had this issue many times, hope this helps

SOURCE: peugeot 807 1.9 hdi can not remove the injectors

www.hutsonprecision.co.uk

SOURCE: Peugeot 206 1.4 Hdi -

20nm

Colin Stickland

• 22516 Answers
• Posted on May 03, 2011

SOURCE: help please What torque are the

no problem the correct setting is ,hmm it says tighten to 20nm then 40nm and then slacken off 130? and tighten 130? ,well this the proverbial brown stuff from a cow to me as when i do these engine i pull down with a speed key then a rachet then my 80cm snap on bar so i suppose iam pulling down to around 75/80 lbs per inch but in all honesty i never use a torque wrench as i used to torque heads in ford of dagenham at 18yrs old so three engine a minute i just sort of feel for the bolt stretch and that it really .