Question about 2000 Oldsmobile Intrigue
I had the codes for the 02 sensors both front and back one come up as well as the Mass air flow sensor. Changed all three and have not been able to get the service engine light to reset and codes to go away, take it to parts store to reread and same codes...any suggestions
. Replace with genuine items only as aftermarket units are not
always compatible with the settings in the CPU. Hence the cpu will not reset as it thinks that there is still a fault because the new units are still out of parameters.
Posted on May 05, 2013
Testimonial: "thanks so what brands are you referring to so that I do not get aftermarkets that will not reset it?"
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: I have a 1999 oldsmobile
fuel pressure regulator on the fuel rail is probably it or the egr valve is stuck open allowing burnt fuel to flood the intake, im leaning towards the fuel pressure regulator because the o2sensor is probably reading rich or if its reading lean then i would choose the egr valve . good luck
Posted on Aug 26, 2008
SOURCE: rEPLACING mass air flow sensor
The mass flow sensor on the 1999 intrigue is along the intake tube right
after the air filter intake housing. Loosen the two clamps that hold the
MAF sensor between the Air filter box cover and air intake tube,
disconnect the wire leads at the MAF sensor connection and remove the
MAF. Note it's uncommon for the MAF sensor to go bad and 95% of the
time, cleaning it with MAF sensor with MAF cleaner will fix any problem
it may of had to trigger the DTC codes.
Start with trying to clean it first just by following the instruction on the MAF cleaner. This should save you time and money to get your Intrigue running 100% again soon.
Good luck and thank you for using Fixya.
Posted on Mar 18, 2010
SOURCE: I have changed the throttle
If the light is still on after removing the terminlas the you still have some sort of code you need to address.You need to have the codes pulled.good luck!
Posted on Apr 26, 2011
Tips for a great answer:
Mar 26, 2017 | Nissan Cars & Trucks
Jul 28, 2014 | Cars & Trucks
Sep 27, 2012 | 2003 Pontiac Grand Am
Sep 25, 2012 | 1997 Nissan Pickup
Jul 04, 2012 | 2001 Isuzu Trooper
Jun 08, 2012 | 2001 Hyundai Accent
Feb 09, 2012 | 1999 Pontiac Grand Prix
Jan 26, 2011 | 1997 GMC Jimmy
May 17, 2009 | 1998 Chevrolet Venture Cargo
Feb 16, 2009 | 1996 Volkswagen Jetta
34 people viewed this question
Usually answered in minutes!