Question about Cars & Trucks

Open Question

How to set engine timing on a 05 pt cruiser - Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

JMMARRERO59
  • 77 Answers

SOURCE: PT Cruiser timing belt

EVERY 90K

Posted on Jan 13, 2009

martin538
  • 117 Answers

SOURCE: Engine motor mounts on 2001 PT Cruiser

Place a block of wood under the engine sump to prevent damage when you jack up the engine to take the tension off the mount. Make sure you do not jack the engine up too much as you might damage the exhaust,cooling hoses etc.

Posted on Apr 07, 2009

  • 316 Answers

SOURCE: Overheating engine

Check your oil dipstick for coolant, or a mucky substance. Your symptoms sound like a blown head gasket.

Posted on Jun 22, 2009

  • 615 Answers

SOURCE: '05 PT Cruiser O2 sensor problems.

I had a similar problem with my car. It turned out the O2 sensors were fine and the issue was a leak in the throttle body causing the engine to run lean. If you have an ODB2 scanner you can look at fuel trims, etc and will be able to tell.

Posted on Mar 28, 2010

  • 5 Answers

SOURCE: 2001 PT Cruiser: How too remove crankshaft pulley 2001 PT Cruiser...

GET A 3 SPOKE PULLEY EXTRACTOR AND SCREW IN THE BOLT BUT IN THE CRANKSHAFT HOLE PUT A MUCH SMALLER SCEW SO YOU WOUNT MESS THE INSIDE UP

Posted on May 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the ECM located?


How To Change The PCM On A Chrysler PT Cruiser ...

? 14:05
https://www.youtube.com/watch?v=fLN48sAKpiE
Jul 24, 2014 - Uploaded by The Hapless Housewife
How To Change The PCM On A Chrysler PT Cruiser ... things wrong with my car now, but had I replaced the PCM (aka) ECM a long time ago, ...

Chrysler PT Cruiser Engine Computer Module ECM PCM ...

www.ebay.com > ... > Engine Computers

eBay
$169.00 - ‎In stock
Chrysler PT CRUISER Engine Computer Module ECM PCM ECU - "Plug & Play" in eBay Motors, Parts & Accessories, Car & Truck Parts ' eBay.

Chrysler PT Cruiser Engine Computer



Dec 30, 2015 | 2002 Chrysler PT Cruiser

1 Answer

05 pt cruiser won't start cranks and pops but


have the timing check for having jumped time. you can also check for fuel pressure if its too low can cause this symptom. also check for spark at the plug it could be an ignition problem, crank or cam sensors. unless you have or are good at technical mechanical work this is a job best left for a shop to do.

Sep 18, 2014 | 2005 Chrysler PT Cruiser

1 Answer

Timing alignment marks


Timming for 2.4 avenger

Jan 14, 2014 | 2009 Chrysler PT Cruiser

1 Answer

Cut off going down the road and wont start back


how many miles is on the vehicle? I had this problem with my 05 PT cruiser limited... the timing belt had broken at just over 150,000 miles. This is only one thing it could be give more info on what exactly happened and the conditions of your car for better answers.

Dec 30, 2012 | 2003 Chrysler PT Cruiser

1 Answer

I put a 2005 motor in a 2001 pt cruiser and put all the 01 sensors on the 05 motor except for the crankshaft senor it is the 05. I am not getting fire at the coil pak


your crank sensor IS what fires the coil pack
mixing the two years sounds like the problem
check wire harnes see if the 01 powers the 05 the same termail
01 senor and pack may have to go back
good luck!

Mar 01, 2012 | 2004 Chrysler PT Cruiser

1 Answer

Replacing 2004 PT Cruiser Turbo battery


there is a metal bar holding the battery on my 05 pt cruiser, how doi remove it

Jan 20, 2012 | 2004 Chrysler PT Cruiser

1 Answer

'05 PT Cruiser O2 sensor problems.


I had a similar problem with my car. It turned out the O2 sensors were fine and the issue was a leak in the throttle body causing the engine to run lean. If you have an ODB2 scanner you can look at fuel trims, etc and will be able to tell.

Mar 28, 2010 | 2005 Chrysler PT Cruiser

1 Answer

When tun on the a/c to my 05 pt cruiser it doesnt


This is because the engine does not accelerate and the RPM falls below the minimum the PCM is in charge of sending a signal for the engine to increase the RPM.Thanks

Feb 27, 2010 | 2005 Chrysler PT Cruiser

3 Answers

Do you have to pull the engine to replace the timing belt on a 2005 ptcruiser?


No, its pretty tight no matter how you do it. Its behind the accessories on the front of your motor

Nov 22, 2009 | 2005 Chrysler PT Cruiser

1 Answer

05 pt cruiser touring turbo code po 302


you have a carbon build up problem try running lucas gas treatment in the car with a full tank of mid grade gas if this does not cure it leave another post and I will give you then next step to fix it, or you can go to http://www.alldatadiy.com and buy a subscription and read all of the recalls and coustmer trouble problems to help locate the problem.

Jun 17, 2009 | 2006 Chrysler PT Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...