Question about Cars & Trucks

1 Answer

How do you tell if ignition coil is bad and needs to be replaced on a 2002 ford windstar

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 563 Answers

If you don't get any spark from your plugs. remove the plug and hook the wire back up, touch the threaded portion to the engine block and have some one crank the engine and see if you get spark. As long as the wire and plug are good, then you know the issue is prior to them.

Posted on May 05, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Dirt Dobber
  • 253 Answers

SOURCE: 2002 Ford Windstar p0300 skips and backfires under load

Just put a coil on a 2002 today. Coils fail a lot with no codes given

Posted on Jun 04, 2010

  • 35 Answers

SOURCE: Replace Ignition Coil - Kia Rio 2002

must dismantle all wires and battery...

Posted on Sep 24, 2008

  • 632 Answers

SOURCE: replacing ignition coil on a 2002 VW jetta 2.0 GLS

The secondary aux air pump needs to be removed in order to access the coil pack secured to the block. Remember the bolt for the coil needs to be torqued down to 7ft lb.

Posted on May 08, 2010

  • 1 Answer

SOURCE: 2002 Ford Windstar Error Code P1131 And P1151

the first o2 sensor is located just underneath the front bumper of the van, the second is located directly underneath the center of the van, kind of where the center console would be if you were inside the van. i hope that makes sense and i hope it helps.

Posted on Jul 19, 2010

  • 45 Answers

SOURCE: how to change ignition coil pack on 2003 ford

the coil pack is located on nthe back valve cover, bank1, towards the firewall.
it mounts with three bolts or torx screws.
it is kinda hard to get to but just pull off the plugwires and
it will give you more room.
there is also i radio capacitor thing that is retained by one of the bolts,

Posted on Aug 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i tell if the coil is bad on 2002 ford windstar. the part is pricey and i only want to replace if nessasary


Do you have any code.What kind of wires you have good or cheap could be problem,plugs

May 05, 2013 | Cars & Trucks

1 Answer

2002 ford windstar put new fuel pump in but still no fuel all fuses good


You've put in a brand new fuel pump and filter in a 2002 F150 and it's still not starting? Besides that just being terrible, you might try the coils. They could be bad. Try replacing them and see if that helps. Good Luck! ---------------------------------------------------------------------------------
Car cable & OBD Connector

Dec 07, 2012 | 1999 Ford Windstar

1 Answer

Check engine light constantly on, now periodic blinking and car is choking


You need to have the systems computer scanned for trouble codes.

Jun 10, 2012 | 2002 Ford Windstar Cargo

1 Answer

2002 Ford Windstar spark plug orientation


For the 3.8L:

Firing Order:
1-4-2-5-3-6

Cylinders:
....(back)
3............6
2............5
1............4
....(front)

Ignition Coil Pack Connections:
(back)
3....4
2....6
1....5
(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com.

Mar 18, 2010 | 2002 Ford Windstar Cargo

1 Answer

2002 Ford Windstar p0300 skips and backfires under load


Just put a coil on a 2002 today. Coils fail a lot with no codes given

Mar 09, 2010 | 2002 Ford Windstar Cargo

2 Answers

2002 ford windstar misfire!!!


Hello

Check your ignition components, spark plugs, wires, if they are in good shape. Check with Ford technical service bulletins. There is a TSB for the upper intake plenum gaskets leaking when engine is cold. The TSB also has a reflash for the Engine Control Module.. I tried just doing the upper intake gaskets and so far so good. The reflash (reprogram your original computer) has to be done at the dealer. Hope this helps..

Apr 07, 2009 | 2005 Renault 18I

2 Answers

2002 ford windstar showing obd2 codes po303,po304,po305 and idiling ruff and wont run over 45 mph and has low miles, how do i fix it ,thanks sincerely mark


might be the coil pack is bad, wires, plugs, o2 sensors, dirty injectors, catalic converter ( only if you smell rotten eggs ) . cylinders are misfireing.

Mar 23, 2009 | 2002 Ford Windstar Cargo

1 Answer

98 ford windstar died during test drive after spark plug change


i would think the coil is bad and i would replace it.

Dec 17, 2008 | 1998 Ford Windstar

1 Answer

Engine light on my 1999 windstar is blinking


the windstars are very bad for cracked ignition coils, to check you have to remove the coil, remove spark plug wires from coil, disconnect main harness from coil and remove the 3 7mm bolts that hold it in place, once it is out inspect it for cracks, if it is the coil expect to pay around $105 for a new one from your Ford dealer

Sep 25, 2008 | 1999 Ford Windstar

1 Answer

Ignition coil


yes it can be a bad coil or improperly installed coil they do have a plus and minus for the coil

ignition coils come in different modes of power make sure by dealer the right mode of coil was used and installed

the computer after a replacement like this make sure that the tech reset the computer so that it can read properly if the comp was not reset you might get the same error again

May 29, 2008 | 1998 Ford Windstar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...