Question about Cars & Trucks

1 Answer

How can i tell if the coil is bad on 2002 ford windstar. the part is pricey and i only want to replace if nessasary

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 5,678 Answers

Do you have any code.What kind of wires you have good or cheap could be problem,plugs

Posted on May 06, 2013


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: think front wheel bearing is

I need instructions on how to replace a front wheel bearing for a 1999 Buick Century.

Posted on Jul 31, 2008

  • 5 Answers

SOURCE: 2002 ford windstar 3.8 liter code PO402

I know this is a old post, but I had the same problem and it was the dpfe sensor. The EGR is almost never the problem with this code

Posted on Jan 01, 2009

Testimonial: "sorry it took so long for the response to this" i had thought i had left one".it was the DPFE sensor. thanks again""

  • 3 Answers

SOURCE: I am needing to replace the coil pack on my 2002

I just did the job yesterday.
1. Remove the windshield wipers.
2. Disconnect hose to wiper fluid nozzles under cowling.
3. Disconnect power to wiper motors at drivers side motor.
4. Disconnect fluid hose near cowling above passenger tire.
5. Unbolt the metal cowling from the vehicle & remove it.
6. Now you can easily access the coil pack - takes 3 screws.
7. Replace items in reverse order.

Posted on May 03, 2009

  • 4536 Answers

SOURCE: 1999 Ford Windstar-Will Turn over but won't start?

fuel pressure regulator could hav failed-located by engine or the ignition module may not be workin-by dist area try not to be a parts replacer-buy a repair book

Posted on Jan 09, 2010

Dirt Dobber
  • 253 Answers

SOURCE: 2002 Ford Windstar p0300 skips and backfires under load

Just put a coil on a 2002 today. Coils fail a lot with no codes given

Posted on Jun 04, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do you tell if ignition coil is bad and needs to be replaced on a 2002 ford windstar

If you don't get any spark from your plugs. remove the plug and hook the wire back up, touch the threaded portion to the engine block and have some one crank the engine and see if you get spark. As long as the wire and plug are good, then you know the issue is prior to them.

May 05, 2013 | Cars & Trucks

1 Answer

2002 ford windstar put new fuel pump in but still no fuel all fuses good

You've put in a brand new fuel pump and filter in a 2002 F150 and it's still not starting? Besides that just being terrible, you might try the coils. They could be bad. Try replacing them and see if that helps. Good Luck! ---------------------------------------------------------------------------------
Car cable & OBD Connector

Dec 07, 2012 | 1999 Ford Windstar

1 Answer

Check engine light constantly on, now periodic blinking and car is choking

You need to have the systems computer scanned for trouble codes.

Jun 10, 2012 | 2002 Ford Windstar Cargo

1 Answer

Reseal 2000 ford windstar rack and pinion

so what is the part number for a 2000 ford windstar v6 3.8L. my mechanic is quoting me $350 for part and total for part and labor about $855. his rate per hour is $90 labor. seems a little pricey. i want to order the part and have him put on and tell him i found out the labor is 3 hours at most. the sway bar links are bad too so he quoted me $202 for that which is where he has to take that off to get to rack and pinion so what is a fair price for sway bar labor if he is already doing rack and pinion? i really don't have the money for either but i have to do repair or p. steering pump can go out do he says (if the fluid leaks all way out).

Apr 08, 2012 | 2000 Ford Windstar

1 Answer

2002 windstar 178,000mi starts rough stalls when engaged just Replaced SPARK PLUG #1 3 days ago

why did you only replace the don`t could be a fuel problem,some of these had problems with the coil packs and or the wiring to the coil packs not working as intended.check these out.

Aug 05, 2011 | 1999 Ford Windstar

1 Answer

2002 Ford Windstar spark plug orientation

For the 3.8L:

Firing Order:


Ignition Coil Pack Connections:

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at

Mar 18, 2010 | 2002 Ford Windstar Cargo

1 Answer

2002 Ford Windstar p0300 skips and backfires under load

Just put a coil on a 2002 today. Coils fail a lot with no codes given

Mar 09, 2010 | 2002 Ford Windstar Cargo

2 Answers

2002 ford windstar showing obd2 codes po303,po304,po305 and idiling ruff and wont run over 45 mph and has low miles, how do i fix it ,thanks sincerely mark

might be the coil pack is bad, wires, plugs, o2 sensors, dirty injectors, catalic converter ( only if you smell rotten eggs ) . cylinders are misfireing.

Mar 23, 2009 | 2002 Ford Windstar Cargo

1 Answer

98 ford windstar died during test drive after spark plug change

i would think the coil is bad and i would replace it.

Dec 17, 2008 | 1998 Ford Windstar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides