Question about Fiat Doblo

Open Question

How to adjust headlights

Adjust head lights

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where, exactly, are the headlight adjusters for the drivers side headlights?


What is the proper adjustment/
Head light adjusters are part of the head light assembly and yes high and low beam are adjusted as one unit normally. Proper adjustment is done on a machine, at an equipped facility.

Mar 27, 2016 | Cars & Trucks

1 Answer

How do I adjust the headlights on a 1994 silverado k1500


Your vehicle only has up/down adjustment as far as I know. You need a hex head to adjust them. A 7mm will work in a pinch. The adjuster is in the center of the headlight bracket just below the top of the bracket. You will see about a one inch hole with a recessed hex head for each light.

Feb 21, 2015 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

Adjust headlights


the bulbs are pre-set in focus and if fitted correctly in the head light assembly they will be focused and adjusted correctly. Try adjusting the whole head light assembly by the 3 screws / adjusting knobs at the back of the assembly to aim the head lights correctly.

Dec 24, 2013 | 2000 Volvo S70

2 Answers

How do i adjust my headlights on my gto


Headlight adjustment requires specialized tools.

Jun 08, 2012 | 2004 Pontiac GTO

1 Answer

How do i adjust my headlights?


  • Always adjust lights with optical headlight aimer VAS 5107, using detailed aiming procedure and specifications
  • Low and high beams are adjusted simultaneously.
98971520



Left headlight (adjustment screws for right headlight are mirror image):
1 - Lateral adjustment 2 - Height adjustment
  • Access adjustment screws through hole in lock carrier (Phillips head or socket head).
  • Turn the adjusting screws for lateral adjustment -1- and height adjustment -2- until the correct setting is achieved.
NOTE: Where equipped, ensure equal movement/function of headlights during automatic headlight range adjustment.

Oct 19, 2010 | 2001 Volkswagen Passat

1 Answer

Head light bounces


On the top of the headlight is a star shaped fitting. This is the adjuster. It works by spinning a gear that is mounted to a shaft to position the headlight up and down.

I've seen them fall off, where the headlight is not adjustable, infact, the bulb sits at the bottom position and bounces up and down.

Adjuster is not available as a part from GM, you are required to replace the headlight.

Apr 01, 2009 | 2005 Chevrolet TrailBlazer

2 Answers

Head light adjustment 2004 optima


This is how to adjust 04 Optima headlights:

For all descriptions, assume that you are standing BEHIND the light assembly.

On the back of the headlight assembly you will see the bulb cover (round cover with tabs) stamped "OPEN" and an arrow showing which direction to turn to remove. Look toward the 8 o'clock position for driver lamp, 4 o'clock for passenger lamp of this cap. Partially obscured by the sheet metal you will see a black screw 3/4 exposed on the headlight assembly. It is at the edge of the sheet metal and very difficult to see, but it,s there. You may need to remove the assembly to get a better look. If needed, see below for lamp assembly removal.

How to remove the headlight: There are two 10mm bolts holding the assembly in place. One is above the headlight and the other one is between the headlight and the high beam light. Unplug the two harnesses that hook into the headlight, if needed, and it is ready to be removed the car. Gently work it out of position.

Take a Phillips screwdriver and turn the black screw - it adjusts the light vertically. Turn it counter-clockwise to make the light go up and clockwise to adjust down. Its as easy once you find the screw.

Jan 03, 2009 | 2004 Kia Optima

1 Answer

Headlight aiming too high


Make sure the bulb was put in correctly and sitting flat as bulb replacement does not require head light adjustment.Check head light bulb before attempting to adjust

Nov 19, 2008 | 2003 Ford Focus

2 Answers

Headlight adjustment


the screws for adjusting the headights are right next to the lights, they are phillips heads and are for adjusting the side to side, 
the adjusting screws for the up and down, are on the bottom of the headlights, and they are a small hole in the grill trim, these lights need a pretty long skinny screwdriver with a phillips head

Aug 17, 2008 | 1996 Suzuki Sidekick

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fiat Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Fiat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...